Comportement des matériaux lors des perçages de ... - gedepeon

REFERENCES
[11] JK CHAI ; JY Jeong, BH Kim, TJ Kim JH Choi, DH Hahn et ES Kim "Sodium-water reaction characteristics with a
specimen target of ferrite steel by water leakage in liquid sodium", J. Ind. Eng. Chem., 10(4), p 524-530, 2004
[12] JK. CHAI ; JY Jeong, BH Kim, TJ Kim, JH Choi & ES Kim, « A Study on the Corrosion and Reaction Characteristics
at the Heat Transfer Tube Surface by Sodium-Water Reaction", J. Ind. Eng. Chem., 8(3), p 283-289, 2002
[13] WT Lee, "Examination of four sodium-water reaction target tubes", Liquid Metal Engineering Center – Memo 1970/5
[14] K. SHIMOYAMA, H. HAMADA, H. TANABE, M. USAMI, Wastage characteristics of High-Chrome Steel Heat
Transfer Tube. PNC TN9410 93-212 - 09/1993
[15] K. SHIMOYAMA & all, Wastage characteristics of Welds of High-Chrome steel Heat Transfer Tube of steam
generator. PNC TN9410 91-288 - 07/1991
[16] K. SHIMOYAMA, Wastage-Resistant Characteristics of 12Cr Steel Tube Material. PNC TN9410 2004-009 - 03/2004
[17] A. GERBER, JP. PIRUS, S. BEILLS, B. CARLUEC, F. BEAUCHAMP, JP. JEANNOT, G. PRELE “ Safety
improvement research to design a sodium fast reactor steam generator with regard to sodium/water reaction risk” –
ICAPP-2010 – San Diego, CA, USA, June 13-17, 2010
[18] S. Kishore, “An experimental study on impingement wastage of Mod 9Cr 1Mo stell due to sdium water reaction",
Nuclear Engineering and Design xxx (2011)
[19] A. Kurihara, H. Ohshima, K. Shimoyama, R. Umeda, “ High-Temperature Sodium Hydroxide Impinging Experiment
for Investigating Tube Wastage Phenomena Caused by Sodium-Water Reaction in FBR Steam Generator ", Vol.77,
No.776, pp.964-968 (2011) - Japan Society of Mechanical Engineers, Series B
ATELIER GEDEPEON MATINEX – « Les matériaux pour les RNR refroidis au sodium» 19 mars 2012 12