EIT 810 - Multimetrix
EIT 810 - Multimetrix
EIT 810 - Multimetrix
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
English3 – check that there is no voltage■ set the rotary switch to ACV (AC Voltage measurement).■ the voltage present is then automatically indicated on the ACV scale of thegalvanometer.IMPORTANT:If this measurement indicates that a voltage is present, you CANNOTPROCEED WITH the insulation measurement.4 – measure the insulation resistanceafter checking that there is no voltage on the circuit to be tested,■ set the rotary switch to INSULATION / MΩ■ select the test voltage on the voltage selector (item 3).■ start the test by pressing the test button and read the result on the display dial.to carry out a stability measurement (over a longer period), press and turn thetest button.the POWER indicator lights, indicating that a test is in progress.Analog earth & insulation tester