Manual Polaris 400CP - LRP

TransmitterYour Merlin Transmitter is an advanced controller designed for the beginner to be easy to use and tune. You willneed to follow the steps below to ensure you prepare the controller correctly for use and understand the adjustmentpossibilities available.Preparing the transmitterOpen the battery holdingtray to expose the emptybattery slots. Insert 8 AAbatteries into the markedspaces. Please note thecorrect direction of thebatteriesInsert the aerial into thehole and turn clockwiseuntil it is tightly secured.Make sure you never overextend the aerial as thiswill cause it to break.Incorrect battery insertioncould lead to damageTransmitter Controls1 415162514138 10 12 11 96371. Aerial2. Throttle Trim3. Cyclic L/R Trim4. Cyclic F/B Trim5. Throttle Stick6. Cyclic Control Stick7. Power Switch8. Battery level indicator9. Rudder reverse switch10. Aileron reverse switch11. Throttle reverse switch12. Elevator reverse switch13. Frequency Crystal14. Rudder Trim15. Idle up switch16. Training switch4