SEPAREL MJ-G530C Gas Separation Module Specifications

Date October 3, 2002Spec No. M5104-SP011 Product Name :2 Size:3 Drawing No. :4 Weight:5 Materials5.1 Hollow Fiber :5.2 Casing :5.3 Endcap :5.4 Sealing Resin :6Module Specification of SEPAREL MJ-G530CPerformance of Module6.1 Yield of Nitrogen Enriched Air (Free Air Pressure : 0.7 Mpa)Feed Air Termperature (℃)Yield of 95% Nitrogen (SLM)Yield of 97% Nitrogen (SLM)151492516103518117 Inspection Item :DIC CorporationMembrane Division8 Operating Characteristics8.1 Maxmum Feed Air Pressure : 0.85MPa8.2 Feed Air Temperature : 10 ~ 35℃・Feed pure air which contains no dust, moisture and corrosivegas to a module.8.3 Maxmum Operating/Surronding Temperature : 40 ℃8.4 Installation Requirements ::9 Storage Conditions10 Warranty10.1 Warranty Period :10.2 Warranty Remedy :SEPAREL MJ-G530C140mmφ × (550mmL)M5104-DF01Approximately 7kgPoly 4Methylpenten-1Poly Vinyl ChlorideAluminiumEpoxy Resin, Polyurethane ResinYield of 95% Nitrogen ≧ 16SLM(Feed Air Pressure : 0.7MPa, Air Temperature : 25℃)Do not give a physical shock to a module.Do not expose a module to direct sunlight.・Keep it indoor, dry and in the temperature of below 35 ℃.・Do not expose to sunlight.・Handle with care.One (1) year after shipment from DIC's factory.The module can be replaced free in case a substantialperformance deterioration occurs under the normal useaccording to the aforementioned Operating Characteristics andStorage Conditions.11 Revision RecordJune 11, 2008 Revision of Spec. No. and Drawing No.: Spec. No. SPC-021004 → M5104-SP01: Drawing No. NBPE-431-P → M5104-DF01