2000-CODE MAIN UNIT-DCS - Golmar

2000-CODE MAIN UNIT-DCSThis controller is prepared to memorise "Dynamic Code" transmitter codes and accesscontrol units (smart cards and/or proximity keys).1. GENERAL INFORMATION:FrequencyCode memorising systemMemory capacityMemory typeAntennaConnection of smartcard drivesProximity key reader connectionCertification* UK only2. TECHNICAL INFORMATION:Power supplyAccess control inputSensitivityConsumption at restWorking temperatureDimensions433.92 MHz or 418 MHz*Self-teaching or via programmer2000 codesExtractable EEPROM mini-cardBuilt-in, adjustable or active Antenna (optional)Maximum 6 drives4 normal mode - 6 reduced modeEuropean regulations EN 300 220-I220 V or 12/24 V AC/DCSIBetter than -100 dBm110 mA at 12/24 V AC/DC - 6 mA at 220 V0 to 70°C222x156x114mm3. DESCRIPTION OF BASE PLATE MICROSWITCHESGROUP OF 4 MICROSWITCHESMicroswitchN°1234OFFMulti-Channel ModeNo Zone ModeNo AntiscanningManual ProgrammingFunctionONSingle-Channel ModeZone ModeONAntiscanning*Auto Programming 1 2 3 4Single-Channel Mode: If only relay 1 is used and control units with more than 1 channelare available, allows selection of which channel will activate the relay for each user(memory position).Multi-Channel Mode: The central unit always activates the relay pertaining to the channelpressed on the transmitter (relay 1 with channel 1, relay 2 with channel 2...), regardlessof the channel used to record the command.Zone Mode: Selects the channels operating in the central unit for each command (memoryposition). When the central unit is programmed and ready to save commands to memory,only those channels pressed will be operative. This option is of no use if the central unitis operated in single-channel mode.17ENGLISH