Appareil 200

EnglishConnected to a pabxBegin as follows: F »config«-• Number length (softkey »number«)The maximum length for internal numbers that are assigned to different internal extensions withinyour PABX system;• Automatic exchange line access (softkey »ln. access«)With direct exchange line access, you do not have to dial the line access digit for conducting outgoingcalls.• Line access digit (softkey »extern«)Line access digit for the pabx; the line access digit is placed automatically in front of the number ofthe caller for the external calls.Setting the User InterfaceBegin as follows: F -»adjust«--»use«Connecting / using a headsets (softkey »headset«)Configuring a headset; For headset operation, use the function key »headset«. You may also want touse the function key »auto-answer«.• Default setting during a connectionSelect whether in the initial settings »DTMF«or»keypad« is possible during an ongoing call;Programming function keysBegin as follows: F -»adjust«-• Direct dial buttons (softkey »list« oder »new«)Programing a telephone number for a specific function button.• Function buttons (softkey »function«)prog new function {}1_:-• Select the function key that you wish to assign a new function to . Confirm your selection by pressingO (an extension key in this example).1_ / Extension keyNumber>• Enter the desired internal extension number »Number« and confirm by pressing O .Possible settings and allocation options are described in the detailed operating instructionsprovided on the CD.Deactivating the extended configuration modeEnter the code number »**46782550##« (Vanity-format »**INSTALL0##«).If the ISDN telephone is disconnected from the ISDN network, (for example by unplugging the ISDN connectorof the phone or by switching off or resetting the pabx), the extended configuration mode will be automaticallyswitched off.9