SCL K03 / K04 / K05 / K06 - Bibus

3. SET UP INSTRUCTIONSThe blower comes packaged as follows:• Intake port of the blower closed for protection.• Intake #700 silencer housing and #706 manifold assembledtogether , but separate from blower.• Box containing #424 gasket, 2 x #904 screws and key ch13.3.1 START-UP WITH 90° MANIFOLDFor final assembly and to put into operation, proceed asfollows:(ref.: Fig.1)1. Remove the protective plug in intake manifold port.2. Place the #424 gasket on intake port.3. Place the #706 manifold with the #700 silencer housing on#424 gasket and seal all the way around with #426 screwsusing the key (ch13) as provided.3.2 START-UP WITHOUT 90° MANIFOLDUsing the blower without the 90” manifold:(ref.: Fig.2 - in line silencer)1. Remove #906 screws and disassemble #700 silencerhousing from #706 manifold.2. Place the #424 gasket on intake port.3. Place the #700 silencer housing on #424 gasket and seal allthe way around with #904 screws using the key (ch13) asprovided.700906424706904424Fig.1Fig.2 - in line silencerGB - 15/38