Toyota Bluetooth SWC - PZ420-T0290-EN - Bluetooth SWC (English) - mode d'emploi

π End active call while a call is held
1 Press and hold the Mode button.
The system responds: Call menu. {Say a command}.
2 Say Hang Up.
The system responds: Call ended. The held call is automatically resumed.
ó Note: Pressing the Seek down button ends the active call (while a call is held).
π Make a call while in an active call
When in an active call, you can make an outgoing call using the Dial Number and
Call commands. The active call is placed on hold.
π Join both active call and held call into a three-way conference
1 Press and hold the Mode button.
The system responds: Call menu. {Say a command}.
2 Say Conference.
The system responds: Starting conference.
π Split a three-way conference
1 Press and hold the Mode button.
The system responds: Call menu. {Say a command}.
2 Say Private Conference.
The system responds: Leaving conference. The last call to be added to conference is
placed on hold.
π End all calls
1 Press and hold the Mode button.
The system responds: Call menu. {Say a command}.
2 Say Hangup All Calls.
The system responds: All calls ended.
ó Note: Pressing and holding the Seek down button ends all calls.
Seamless mobility
If you have an active private call and you turn the vehicle ignition on, the hands-free
system automatically connects to your paired handset device and transfers the call to the
hands-free system.
If you have an active hands-free call and you switch the vehicle ignition off, the handsfree
system automatically transfers the call to your handset device.
If your handset device prompts to switch the call to the handset, select yes.
A
Bluetooth® SWC 25