Toyota USB & iPod interface kit - PZ473-00266-00 - USB & iPod interface kit (English, French, German, Dutch, Italian) - mode d'emploi

7.3. Power On/Off
Press [PWR-VOL] knob to switch the power on.
Press [PWR-VOL] again to switch the power off.
7.4. Volume Up/Down
Turn [VOLUME] clockwise to increase the volume.
Turn [VOLUME] counter clockwise to decrease the volume.
7.5. Selecting iPod Mode
Press [DISC] on the head unit to select iPod mode. Each time [DISC] is pressed, the modes change
as follows:
Internal CD “ external CDCH (=iPod) “ internal CD.
ó Note: As the iPod Device is connected through the external CD changer integration kit, the
radio will indicate the external CD Changer mode.
7.6. Equalizing within iPod Mode
Bass/Treble/Fader/Balance can be adjusted specifically for iPod mode. When you switch from iPod
to radio or CD mode, the audio settings will be changed to the setting of each mode specially.
The audio settings for each mode will be stored in the memory of the head unit and will be applied
automatically when a certain mode is selected.
Display radio with touch screen
Press the [AUDIO CONTROL] key to select the Audio control screen.
Radio
Press the [Tune] knob to select the desired item. Each time Tune Dial is pressed the selectable items
change as follows: BAS (Bass) “ TRE (Treble) “ FAD (Fader) “ BAL (Balance).
Pressing Tune Dial again releases Audio Control.
By rotating the [Tune] knob to the left/right the selected item can be adjusted.
ó Note: Also the EQ settings on the iPod will affect the sound. To adjust the iPod EQ settings,
please refer to the iPod User manual.
A
USB & iPod ® integration kit 23