Brother PJ-762 - Manuel des modèles P-touch/ Référence des commandes
Brother PJ-762 - Manuel des modèles P-touch/ Référence des commandes
Brother PJ-762 - Manuel des modèles P-touch/ Référence des commandes
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
P-<strong>touch</strong> Template Command Refe<strong>rence</strong><br />
^PS<br />
Specify print start command text string<br />
Parameters<br />
ASCII: ^ P S n1 n2 data<br />
Decimal: 94 80 83 nd1 nd2 datad<br />
Hexadecimal: 5E 50 53 nh1 nh2 datah<br />
0≤n1≤2<br />
0≤n2≤9<br />
Description<br />
00h≤datah≤FFh<br />
• Specifies the text string for the print start command.<br />
(n1*10)+n2: Length of the text string (can be set between 1 and 20)<br />
data:<br />
Text string (The maximum number of characters that can be set is 20 characters<br />
(bytes).)<br />
• The default text string for the print start command is “^FF”.<br />
• This command is a dynamic command.<br />
Remarks<br />
• Invalid if more than 20 characters have been specified<br />
Example<br />
• To change the text string for the print start command to “START”:<br />
Since the text string to be specified (data), “START”, contains 5 characters, n1=0 and n2=5. Therefore, the<br />
command will be as follows.<br />
^ P S 0 5 S T A R T<br />
(5Eh 50h 53h 30h 35h 53h 54h 41h 52h 54h)<br />
- 35 -<br />
7. Control Command Details