Brother PJ-762 - Manuel des modèles P-touch/ Référence des commandes
Brother PJ-762 - Manuel des modèles P-touch/ Référence des commandes
Brother PJ-762 - Manuel des modèles P-touch/ Référence des commandes
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
P-<strong>touch</strong> Template Command Refe<strong>rence</strong><br />
ESC iXD2 Specify delimiter<br />
Parameters<br />
Description<br />
ASCII: ESC i X D 2 n1 n2 data<br />
Decimal: 27 105 88 68 50 nd1 nd2 datad<br />
Hexadecimal: 1B 69 58 44 32 nh1 nh2 datah<br />
01h≤nh1≤14h<br />
nh2: 00h (Fixed)<br />
00h≤datah≤FFh<br />
• The delimiter is used to indicate when to move to the next object in data that is being sent.<br />
• Specifies the text string for the delimiter.<br />
nh1+(nh2*256): Length of the text string (between 1 and 20)<br />
data:<br />
Text string (The maximum number of characters that can be set is 20 characters<br />
(bytes).)<br />
• The default text string for the delimiter is “09h” (Tab code).<br />
• This command is a static command.<br />
Remarks<br />
• Invalid if more than 20 characters have been specified<br />
Example<br />
• To change the delimiter to “,” (2Ch):<br />
Since the text string contains one character, nh1=01h and nh2=00h. In addition, with the text string (datah)<br />
“,” (2Ch), the command will be as follows.<br />
ESC i X D 2 01h 00h 2Ch<br />
(1Bh 69h 58h 44h 32h 01h 00h 2Ch)<br />
- 58 -<br />
7. Control Command Details
Change language