All Make Van Product Guide
The All Make Van Product Guide contains all universal products, as well as a reduced selection of vehicle-specific products.
The All Make Van Product Guide contains all universal products, as well as a reduced selection of vehicle-specific products.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SHELVING TIPS & TRICKS<br />
INSTALLING DIVIDER SHELVING WITHOUT A WHEEL WELL<br />
46”H shelving with two 10”H shelf doors and divider shelving.<br />
46”H Shelving with drawers, locking door front, and bins.<br />
SHELVING ACCESSORY INSTALLATION BEST PRACTICES<br />
1<br />
2<br />
PLAN TO LEAVE SPACE FOR ACCESSORIES<br />
When planning out space for locking door fronts, it is common to forget to include the height of divider shelving extrusions (3.5”)<br />
and any included retainer lips (3”) in height calculations, which can create issues when it comes time to install your door fronts.<br />
UTILIZE YOUR RETAINER LIP TO GET THE MOST OUT OF YOUR SHELVING UNIT<br />
Without a wheel well obstruction to worry about, the space below your shelves can be made as tall or short as<br />
you’d like. As seen in the image on the left, this leftover space can even be turned into additional storage by<br />
adding on a retainer lip and even a door front for added security. In this case, a 3”H retainer lip and 10”H door<br />
have been installed, effectively turning this under-shelf space into roughly an additional 13” of usable storage.<br />
CUSTOMIZE YOUR SHELVING TO FIT YOUR NEEDS<br />
1<br />
2<br />
INSTALL SHELVING DECKS UPSIDE DOWN<br />
Shelving decks can be installed upside down for lipless shelving.<br />
CUT YOUR SHELVING TO ANY LENGTH<br />
Westcan shelving can also be cut down to any length, and by removing<br />
the aluminum extrusion they can also be made narrower.<br />
Remember: Measure twice, cut once!<br />
westcanmanufacturing.com 57