Sony DSC-W380 - DSC-W380 Guide pratique Anglais
Sony DSC-W380 - DSC-W380 Guide pratique Anglais
Sony DSC-W380 - DSC-W380 Guide pratique Anglais
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Printing is canceled.<br />
• Confirm that you have disconnected the cable for multi-use terminal before the<br />
Connecting) mark disappears.<br />
Cannot insert the date or print images in the index mode.<br />
(PictBridge<br />
• The printer does not provide these functions. Consult the printer manufacturer as to whether the<br />
printer provides these functions or not.<br />
• The date may not be inserted in the index mode depending on the printer. Consult the printer<br />
manufacturer.<br />
“---- -- --” is printed on the date-inserted part of the image.<br />
• The image does not have the recording data so the date cannot be inserted. Set [Date] to [Off] and<br />
print the image again (page 115).<br />
Cannot print the image at the size selected.<br />
• When you use paper of a different size after connecting the printer to the camera, disconnect and then<br />
reconnect the cable for multi-use terminal.<br />
• The print setting of the camera differs from that of the printer. Change the setting of either the camera<br />
(page 115) or the printer.<br />
• Consult the printer manufacturer as to whether the printer can provide the desired size.<br />
Cannot operate the camera after cancelling printing.<br />
• Wait for a while as the printer is carrying out the cancellation. It may take some time depending on<br />
the printer.<br />
Others<br />
Table of<br />
contents<br />
Operation<br />
Search<br />
MENU/Settings<br />
Search<br />
Index<br />
The lens gets fogged.<br />
• Moisture condensation has occurred. Turn off the camera and leave it for about an hour before using<br />
it.<br />
The camera turns off with the lens portion extended.<br />
• The battery pack is discharged. Replace it with a charged battery pack, then turn the camera on again.<br />
• Do not attempt to force the lens that has stopped moving.<br />
The camera becomes warm when you use it for a long time.<br />
• This is not a malfunction.<br />
The Clock Set screen appears when you turn on the camera.<br />
• Set the date and time again (page 104).<br />
• The internal rechargeable backup battery has discharged. Insert a charged battery, and set aside for<br />
24 hours or more with the power left off.<br />
The date or time is incorrect.<br />
• The Area Setting is set to a different location than your current location. Change the setting by<br />
MENU t (Settings) t [Clock Settings] t [Area Setting].<br />
124 GB