You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EN<br />
2.2 Manual control without lock function<br />
L CAUTION: Risk of injury - Adjustments made by the patient must be allowed<br />
under supervision only.<br />
Page 8<br />
<strong>Luna</strong><br />
2010-11<br />
This manual control shall be used in combination with the disabling box.<br />
The height of the <strong>bed</strong> surface, the angle of the backrest and the knee-bend angle can be<br />
adjusted with the manual control. After use the manual control needs to be hung on the side<br />
rail and secured by means of the disabling box.<br />
Following adjustments can be used:<br />
Back section down and up function<br />
Mattress support platform down and up<br />
Leg down and up function<br />
Anti trendelenburg<br />
When connecting the manual control to the disabling box please make sure that the<br />
connection plug in the disabling box is especially secure. Proceed as follows:<br />
1. Remove the safety ring from the connection.<br />
2. Insert the connection plug for the manual control in<br />
the disabling box.<br />
3. Place the safety ring in the disabling box<br />
connection so the cable cannot be removed<br />
involuntarily.<br />
The connection cable can only be removed from the disabling box after the safety ring has<br />
been removed.
Change language