CB256 - ACCO Australia

Getting Started
6. Comb Binding
● Load the front cover onto the open comb and lower it towards the
front of the machine. [Fig. 5]
● Load the internal sheets onto the open comb, repeating until all
are loaded.
● Load the rear cover onto the open comb.
● Rewind the comb opening knob and remove the bound
document.
7. Correcting a Bound Document
Additional sheets may be included or removed at any time by opening
and then closing the comb binding as described in sections 3 and 6
8. Emptying the Waste Tray
Important: The waste tray must ONLY be emptied with the machine
supported in a upright position.
● Stand the machine upright.
● Unclip the tray from the underside of the machine. [Fig. 6]
● When refitting the tray ensure that it clicks firmly into place before
returning the machine to normal operation.
9. Storage
● Lower the handle, if raised.
The machine incorporates feet at the rear to allow vertical storage.
2
10. Security
● A Security Slot is fitted for use with leading makes of security
leash. E.g.: Kensington Microsaver ( ).
Technical Data
Operation Mode
Max. binding size
Hole pitch
Number of punch slots
Margin depth
Punching - paper (80gsm)
Max. punching - plastic foils (0.2mm)
Min. comb diameter
Max. comb diameter
Max. document size (sheets)
Net weight (kg)
Dimensions (cm)
Technical data subject to change without notification
CB256
manual
DIN A4 (max. 310mm)
US Pitch 9/16” / 14.28mm
21 fixed
fixed 2.5mm
max. 15
max. 2
5mm
20mm
170
5.6
44 x 33 x 14
GB