DIGICHARGER VARIO PRO - FotoMax
DIGICHARGER VARIO PRO - FotoMax
DIGICHARGER VARIO PRO - FotoMax
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
GB operating instructions<br />
features<br />
The Digicharger Vario pro is a universal fast charger for battery packs used in cameras,<br />
camcorders and mobile phones, plus for charging AA and AAA batteries. With the help of<br />
an adjustable contact set , the Digicharger Vario pro is able to charge nearly all common<br />
lithium batteries for cameras, camcorders and mobile phones. In addition, the unit is<br />
also able to charge USb equipment via its USb output port. (USb cable is not included).<br />
Using the inter-changeable mains plug system for world wide use, or the DC car lighter<br />
plug, (included in the package), the Digicharger Vario pro is ideally suited for travelling<br />
around the world. The operation of the Digicharger Vario pro is simple and straightforward.<br />
All relevant information can read off the clear LCD display.<br />
safety instructiOns<br />
> please read the operating instruction carefully before using the Digicharger Vario pro<br />
> Keep the charger in a dry place<br />
> Never attempt to open the charger by force and do NoT use if any part is in a defective condition<br />
> The charger must be protected against high humidity and water<br />
> Keep away from children’s reach<br />
> please only use the AC power supply or DC car lighter plug that is supplied<br />
> The Digicharger Vario pro is only for use with Li-Ion, Li-pol and NiMH technology cells<br />
Do not use with disposable cells or any other types as there is a risk of explosion<br />
> remove the Digicharger Vario pro from the power source after charging<br />
Operating instructiOns<br />
Connect the power to the Digicharger Vario pro using the supplied AC power supply (please<br />
use the right input plug for your country) or use the DC car lighter plug.<br />
charging lithiuM Batteries:<br />
The Digicharger Vario pro has a two point sliding cover, for charging batteries with<br />
large housings. The second point of the sliding cover will be activated by pushing the<br />
ANSMANN button (1) on the top. The charger has two flexible contacts (2), which are<br />
adjusted with the blue guiding pins (3). The height of the contacts can be adjust for<br />
better connection to the batteries with recessed pins by using the thumb wheel (4). For<br />
charging the battery pack, please insert the battery at the contact end and bring the<br />
contact pins into the correct positions. one contact has to be connected to the minus<br />
and one at the plus pole of the battery. The charger will automatically choose the right<br />
polarity so connection can be made either way round. The charger will automatically choose<br />
the right polarity so connection can be made either way round. If the battery has more than<br />
two contacts and no clear markings regarding the purpose or polarity, you have to do it by