Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Serie</strong> 07.058. a mozzo<br />
<strong>Mt</strong> 320 <strong>Nm</strong><br />
<strong>Serie</strong> /<strong>Serie</strong>s 07.058.- 04 07.058.- 14<br />
Sez. A-A<br />
<strong>Mt</strong> (1) <strong>Nm</strong> 320 320<br />
ß° (2) 45/30 45/30<br />
A H7(3) 25 30<br />
B 44/40 50<br />
C 30 45<br />
D (4) 8 8<br />
E (4) 28,3 33,3<br />
F (4) M 8 M 8<br />
G 60 60<br />
H 10 12<br />
N 60 75<br />
P (UNI 8953) 6x21x25 6x21x25<br />
T 40x2/32x1,5 40x2/32x1,5<br />
Allungabile<br />
con tubo di prolunga<br />
Sliding with tube<br />
Fissa con tubo<br />
di prolunga<br />
Fixed with tube<br />
Extracorta<br />
Extra short<br />
Giunto semplice<br />
Simple joint<br />
Cod./Code<br />
07.058.304<br />
07.058.314<br />
07.058.504<br />
07.058.514<br />
07.058.604<br />
07.058.614<br />
07.058.104<br />
07.058.114<br />
Flangia/Flange SAE 1400 SAE 1300<br />
L (5) +All 320+60 (6)<br />
375+120<br />
475+220<br />
L (5) +All 350+60 (6)<br />
405+120<br />
505+220<br />
L (5) 235<br />
L (5) 265<br />
L MIN +All (7) 245+30 (6)<br />
L MAX +All (7) 300+60 (6)<br />
L MIN +All (7) 275+30 (6)<br />
L MAX +All (7) 330+60 (6)<br />
L 120<br />
L 150<br />
Giunto doppio<br />
Double joint<br />
07.058.204<br />
07.058.214<br />
L 179/200<br />
L 209/230<br />
07.058.-04 (9)<br />
07.058.-04.-- (9)<br />
07.058.-14 (9)<br />
07.058.-14.-- (9)<br />
A H7(3) 25<br />
A H7(8) 18/19/20/22/24<br />
DxE (4) DIN 6885<br />
A H7(3) 30<br />
A H7(8) 22/24/25/28/32<br />
DxE (4) DIN 6885<br />
(1) Momento torcente dinamico massimo.<br />
(2) Angolo massimo di inclinazione per giunto.<br />
(3) Foro standard.<br />
(4) Cave per linguetta e fori per grani filettati a richiesta.<br />
(5) Lunghezza minima, lunghezze superiori a richiesta.<br />
(6) Angolo massimo di inclinazione 30° nell'esecuzione con protezione<br />
del profilo scanalato.<br />
(7) Lunghezze minime e massime, differenti a richiesta.<br />
(8) Fori speciali a richiesta.<br />
(9) Completare il codice con il tipo desiderato e con il diametro dei fori,<br />
se differente dalla standard.<br />
Qualora figurino due alternative, se non espressamente richiesto,<br />
verrà fornita la prima delle due.<br />
(1) Max dynamic torque.<br />
(2) Maximum angle of inclination per joint.<br />
(3) Standard hole.<br />
(4) On request keyways and threaded holes.<br />
(5) Minimum length, longer lengths on request.<br />
(6) Maximum angle of inclination 30° in execution with metallic<br />
protection of the splined.<br />
(7) Minimum and maximum closed lengths, different lengths on request.<br />
(8) On request special holes.<br />
(9) Complete the code with the needed type and with the<br />
diameter holes, if different from the standard.<br />
When there are two alternatives, if not explicity required,<br />
we'll supply the first one.<br />
20