Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ANGOLO DI INCLINAZIONE E NUMERO DI GIRI<br />
Nel dimensionamento della trasmissione cardanica<br />
occorre assicurarsi che la velocità di rotazione, in relazione<br />
all’angolo di lavoro, non sia troppo elevata.<br />
Per una durata delle crociere e una regolarità di rotazione<br />
verificare che la trasmissione scelta ricada nei valori<br />
indicati dal seguente Diagramma 6.<br />
ANGLE OF WORK AND RPM<br />
On cardan shaft selection it’s necessary assuring that<br />
the rotation speed, in function of the work angle, is not<br />
too much high.<br />
For a long duration of the cross joints and a rotation regularity,<br />
it’s necessary that the selected cardan shaft is on<br />
the indicated values of the following Diagram 6.<br />
Diagramma 6<br />
Esempio: Trasmissione 08.151 ➞ Angolo 12° = Giri<br />
massimi 1.500 min.<br />
Example: Cardan shaft 08.151 ➞ max angle 12° Max<br />
Rpm 1.500<br />
79