You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Serie</strong> 08.150.<br />
<strong>Mt</strong> 6.800 <strong>Nm</strong><br />
<strong>Serie</strong> /<strong>Serie</strong>s 08.150.- - 0 08.150.- - 1<br />
<strong>Mt</strong> (1) <strong>Nm</strong> 6.800 6.800<br />
ß° (2) 35 35<br />
A 150 180<br />
B H7 90 110<br />
D 10 12<br />
F +0,2 3 3<br />
G 140 140<br />
H B12 12 16/14<br />
I ±0,1 130 155,5<br />
N° Fori / Holes 8 8<br />
N 82 82/86<br />
P (DIN 5480) 55x2,5x20 55x2,5x20<br />
T 85x5 85x5<br />
FLANGIA DIN / DIN FLANGE<br />
Allungabile con tubo di prolunga<br />
Sliding with tube<br />
Cod./Code<br />
08.150.400<br />
08.150.401<br />
Flangia/Flange DIN 150 DIN 180<br />
L (3) +All 630+110<br />
L (3) +All 630+110<br />
Fissa con tubo di prolunga<br />
Fixed with tube<br />
08.150.500<br />
08.150.501<br />
L (3) 400<br />
L (3) 400<br />
Extracorta<br />
Extra short<br />
Giunto semplice<br />
Simple joint<br />
08.150.610<br />
08.150.620<br />
08.150.630<br />
08.150.640<br />
08.150.650<br />
08.150.611<br />
08.150.621<br />
08.150.631<br />
08.150.641<br />
08.150.651<br />
08.150.100<br />
08.150.101<br />
L (4) +All 390+30 (5)<br />
L (4) +All 420+40 (6)<br />
L (4) +All 460+70 (6)<br />
L (4) +All 520+100 (6)<br />
L (4) +All 570+100 (6)<br />
L (4) +All 390+30 (5)<br />
L (4) +All 420+40 (6)<br />
L (4) +All 460+70 (6)<br />
L (4) +All 520+100 (6)<br />
L (4) +All 570+100 (6)<br />
L 164<br />
L 172<br />
Giunto doppio<br />
Double joint<br />
08.150.200<br />
08.150.201<br />
L 328<br />
L 328/344<br />
(1) Momento torcente dinamico massimo.<br />
(2) Angolo massimo di inclinazione per giunto.<br />
(3) Lunghezza minima, lunghezze superiori a richiesta.<br />
(4) Lunghezze consigliate, differenti a richiesta.<br />
(5) Angolo massimo di inclinazione 20°.<br />
(6) Angolo massimo di inclinazione 25°.<br />
Qualora figurino due alternative, se non espressamente richiesto,<br />
verrà fornita la prima delle due.<br />
(1) Max dynamic torque.<br />
(2) Maximum angle of inclination per joint.<br />
(3) Minimum length, longer lengths on request.<br />
(4) Standard suggested lengths, different lengths on request.<br />
(5) Maximum angle of inclination 20°.<br />
(6) Maximum angle of inclination 25°.<br />
When there are two alternatives, if not explicity required,<br />
we'll supply the first one.<br />
40