GITAL GILDEMEISTER AS16 AS20 GS20 GM20

AS16 AS20 GS20 GM20
Scatola presa-moto per pettinatore Saco-Autor “GR.1”
Driving Gear-box for Saco-Autor “GR.1” thread chasing attachment
La scatola a ingranaggi G1D/6 è utilizzata per poter impiegare
in pos. 4-5 il pettinatore Saco “GR.1” e contemporaneamente
non smontare la nostra scatola Presamoto, che può continuare
ad azionare una scatola a poligonare nella posizione non
occupata dal pettinatore.
Oltre alla scatola siamo in grado di fornire le 2 coppie di
ingranaggi da montare all’interno per ottenere i vari tipi di
filetto.
G1D/6
If you are using our polygon/threadmilling attachment you can’t fit
the driving gear-box for Saco-Autor “GR.1” thread chasing
attachment. In this case we can supply the G1D/6 gear box.
So you can leave our 2-outputs driving unit on the machine and fix
the G1D/6 on the output of the position where you want to place the
Saco thread chasing attachment. Inside the G1D/6 you fit the same
two pairs of gear that you have in your Saco driving unit.
If you don’t have a thread chasing attacchment but you plan to buy
one please note that you just need the cross slide unit from Saco
and you can drive it with the G1D/6, that you can buy from us
complete with the 2 pairs of gear.
Tabella rapporti ingranaggi pettinatore
Thread-chasing attach. Gears ratio
z1 z2 Rapporto
ratio
21 42 1:2
24 40 3:5
20 44 5:11
26 39 2:3
27 36 3:4
32 32 1:1
30 35 6:7
24 52 6:13
15 28 15:28
18 45 2:5
15 32 15:32
30 34 15:17
30 33 10:11