DIMMER - Relco
DIMMER - Relco
DIMMER - Relco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
since 1967<br />
L<br />
N<br />
L<br />
Pulsante<br />
NA<br />
Push button<br />
N<br />
RT78SCG<br />
Sensore<br />
Sensor<br />
N<br />
RT799PCG<br />
Posizionare il Jumper per selezionare<br />
la modalità d’uso<br />
Position the jumper to select the user<br />
mode<br />
Staccare la spina<br />
Pull out the plug<br />
SERIE RT78PC<br />
DATI TECNICI - TECHNICAL DATA<br />
Tabella 1 Classe I Classe II<br />
Cavo di rete 3x0,75 2x0,75<br />
Lato carico RT78PC 5x0,75 4x0,75<br />
Funzionamento<br />
La regolazione avviene agendo direttamente sul pulsante. L’accensione<br />
avviene per il tramite di un breve tocco sul pulsante della lampada. Per<br />
ottenere la regolazione dell’intensità luminosa mantenere premuto il<br />
pulsante della lampada sino a raggiungere il livello d’intensità luminosa<br />
desiderata: a livello raggiunto interrompere il contatto. Qualora si desideri<br />
invertire il senso di regolazione interrompere il contatto e ripristinarlo. Lo<br />
spegnimento avviene agendo nuovamente con un breve tocco sul pulsante.<br />
Al momento dello spegnimento il valore dell’intensità luminosa viene<br />
memorizzato per essere ripristinato alla nuova accensione. A seconda<br />
dei mercati, il circuito può essere provvisto di un buzzer che indicherà<br />
la dimmerazione.<br />
Fig. 1 - RT78PC<br />
Table 1 Class I Class II<br />
Power cable 3x0,75 2x0,75<br />
Load side RT78PC 5x0,75 4x0,75<br />
Function<br />
Act directly on the push button to dim. Briefly touch the lamp’s push<br />
button to switch on. To dim the luminous intensity, act repeatedly on the<br />
sensorial part of the lamp or the push button until the desired luminous<br />
intensity is reached. When the level is reached, interrupt the contact. If<br />
the dimming direction is to be changed, interrupt the contact and reset<br />
the direction. To switch off, briefly press the push button again. At switch<br />
off, the luminous intensity is memorised and is reset when switched on<br />
again. Depending on the markets, the circuit could be provided with a<br />
buzzer that indicates the dimmer function<br />
Fig. 2 - RT78PC<br />
max 4mt<br />
FLUORESCENTI VARIALUCE - - FLUORESCENT<br />
<strong>DIMMER</strong><br />
N<br />
N<br />
L<br />
PULSANTE<br />
PUSH-BUTTON<br />
max 4mt<br />
Fig. 3 - RT78PC<br />
max 4mt<br />
max 4mt<br />
www.relco.it<br />
363