bridge 4400 can - Bis Alarmes
bridge 4400 can - Bis Alarmes
bridge 4400 can - Bis Alarmes
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
12 - ALARM MEMORY.<br />
Upon disarming, the system warns about an alarm that has<br />
occurred using four signals of the blinkers and of the buzzer (where<br />
enabled). Please take notice of the LED signals that remain<br />
available up until the next system arming or until the dashboard is<br />
switched on again. The various signal patterns indicate the cause<br />
of the alarm.<br />
LED SIGNALS<br />
1 flash<br />
2 flashes<br />
3 flashes<br />
4 flashes<br />
5 flashes<br />
CAUSE OF THE ALARM<br />
Door driver side opened.<br />
Internal ultrasonic volumetric sensor<br />
triggered.<br />
Bonnet opened.<br />
Start -up attempts<br />
(ignition key).<br />
Boot opened.<br />
6 flashes<br />
Doors opened.<br />
7 flashes<br />
External sensor.<br />
8 flashes<br />
Siren cables cut on Cobra Bus.<br />
9 flashes<br />
U.S. module connected on Cobra Bus<br />
10 flashes<br />
11 flashes<br />
12 flashes<br />
13 flashes<br />
Generic module connected<br />
on Cobra Bus.<br />
Immobilizer 1 module connected<br />
on Cobra Bus.<br />
Immobilizer 2 module connected<br />
on Cobra Bus.<br />
Keypad module connected<br />
on Cobra Bus.<br />
14 flashes<br />
ICD connected on Cobra Bus.<br />
<strong>4400</strong> USER AND FITTING INSTRUCTIONS GB<br />
31
Change language