DMX LED SCANNER

ADDRESSING:ENGLISHDEUTSCHEach projector occupies 7 channels. To ensure that the control signals are properly directed to each projector, theprojector requires addressing. This is to be done for every single projector by changing the LED display as set outin this table.The starting address is defined as the first channel from which the DMX LED SCANNER 25W will respond to thecontroller.Please make sure that you don’t have any overlapping channels in order to control each DMX LED SCANNER correctlyand independently from any other fixture on the DMX data link. If two, three or more DMX LED SCANNERsare addressed similarly, they will work similarly.Connection with the mainsConnect the device to the mains with the enclosed power supply cable.The occupation of the connection-cables is as follows:Cable PIN InternationalBrown Live LBlue Neutral NYellow/GreenEarthFRANCAIS ITALIANO POLSKIFRANCAIS españolFRANCAIS10