Walkbehind Snowthrower - Canadiana

MAINTENANCESERVICE RECOMMENDATIONSPROCEDUREFIRST5HOURSBEFOREEACHUSEAFTEREACHUSEEVERY5HOURSEVERY10HOURSEVERY25HOURSBEGINNINGEACHSEASONBEFORESTORAGESAFETYCheck to Make SureAuger Blade Stops Within5 Seconds After RightControl Lever is Released✓Lubricate Control Leversand Linkages✓ ✓ ✓Check Snowthrower forLoose Hardware✓✓Lubricate Hex Shaft andChains✓✓Lubricate Auger ShaftFittings✓✓SNOWTHROWERLubricate Chute RotationGear and DeflectorMechanism✓Remove All Snow andSlush off Snowthrower toPrevent Freezing of Augeror Controls✓Check Tire Pressure✓ENGINEOil, Check ✓ ✓ ✓Oil, Change ✓ ✓Check and Replace Spark✓ ✓PlugNOTE: The warranty on this snowthrower does not cover itemsthat have been subjected to operator abuse or negligence. Toreceive full value from the warranty, operator must maintainsnowthrower as instructed in this manual.The above Service Recom mendations are supplied to assist theoperator to properly maintain the snowthrower.CAUTION: Do not allow grease or oil to contact therubber friction wheel or the disc drive plate. If the discdrive plate or friction wheel come in contact withgrease or oil damage to rubber friction wheel willresult.NOTICE: If grease or oil comes into contact with the disc driveplate or friction wheel, make sure to clean plate and wheelthoroughly with an alcohol base solvent.23