200 - TTM | Top Tronic Monaco

Menu setting:Press SET in on hook mode, LCD will show VIEW MENU ↑↓,choose the menu bypressing UP or DOWN key. Press SET again to enter the selected menu:Select LanguagePress SET. Scoll to “SELECT LANGUAGE” by pressing UP or DOWN key. There are7 languages for choice: English/French/Spanish/Italian/German/Turkish/Danish, withEnglish as the default. Choose the desired language by pressing UP or DOWN key.Set area codePress SET, Scoll to “SET AREA CODE” by pressing UP or DOWN key. Press toconfirm, LCD will show------,with the first“-“ blinking if there is no code set before. Ifthere is code, LCD will show the numbers, and the first number will blink.Press UP or DOWN key to input the digit. Go to the next digit setting by pressingSET. There are 5 digitals that can be set. Confirm the setting and go to next bypressing SET.Long distancesPress SET. Scroll to “LONG DIST ACCESS” by pressing UP or DOWN key. LCD willshow------,with the first”-“ blinking, if there is no code set before. If there is A code.LCD will show the numbers, and the first number will blink. Press UP or DOWN keyto input the digit. Go to theNext digit setting by pressing SET There are 6 digitals that can be set. Confirm thesetting and go to next by pressing SETDate/ TimePress SET. Scroll to “ DATE/TIME” by pressing UP or DOWN. After entry, the yearwill be blinking. Modify it by UP or DOWN then go to the next time setting by pressingSET. After setting the date and time, LCD will show the corresponding week. Allthe information will update automatically if the incoming call is FSK type.Contrast adjustPress SET. Scroll to “CONTRAST ADJUST” by pressing UP or DOWN. Press SETto enter this menu. LCD shows the current contrast, Choose the desired level bypressing UP or DOWN.Baby callPress SET. Scroll to “BABY CALL” by pressing UP or DOWN. Press SET to enterthis menu. LCD shows the current state, switch on or off by pressing UP or DOWN.When you choose on press SET to confirm. LCD shows BABY CALL NUMBER, indicatinguser to input the baby call’s number. After inputting the desired number, pressSET to confirm. The default setting is “BABY CALL OFF”.When the desired baby call number is programmed into the phone and the functionis set to “ON”, pressing any key on the phone (except the SET key) or lifting thehandset, will dial the baby call number automatically.Ring MelodyPress SET. Scroll to “ RING MELODY” by pressing UP or DOWN . Press SET toenter this menu. LCD will show the current ring. Choose thedesired ring by pressing UP or DOWN. If you choose the C1 option, this menu will beshielded.Phonebook inputPress SET. Scroll to “PHONEBOOK INPUT” by pressing UP or DOWN press SETto enter this menu. LCD will prompt to input number. After inputting numbers, pressSET to save and start inputting name. Move the cursor by UP or DOWN keys whenediting name, and delete the wrong content by DEL. After name is edited, press SETto confirm and go to the next.Phonebook editPress SET. Scroll to “PHONEBOOK EDIT” by pressing UP or DOWN. Press SET toenter this menu. LCD will prompt to input the name to search the desired item, or justview all the items by pressing UP or DOWN. Then press SET to edit the item, theoperation is the same as PHONEBOOK INPUT.Flash timePress SET. Scroll to “FLASH TIME” by pressing UP or DOWN. There are 4 flashtime for choice : 100ms/300ms/600ms/1000ms. The default time is set by the option.Choose the desired time by pressing UP or DOWN.Operation in on hook mode:Incoming call’s displayWhen receiving an incoming call, phone will show the information of this call, suchas name, date and time, and record the total number of all incoming calls. If the callis DTMF signal, phone will put its date & time to this call, due to that there is onlynumber but no other information taken with the signal. If no name has been sent outby exchange, LCD will show the name if the phonebook have the same number.If it is the new incoming call, there will appear a “NEW” icon on LCD; If it’s not, then“REP” icon appears at the same time. If it’s a private call, LCD will indicate PRIVATECALL. And OUT OF AREA will display on LC if the call is out of area, and ERROR ifthe CLI DATA is not correct.Review the incoming callsReview the incoming calls by pressing UP or DOWN in the idle mode, it will displayall the information such as number, date and time of the calls. Pressing UP orDOWN more than 2s can change the item quickly.