Untitled - Platon-implant.com

Bore twist drills φ 24-28These are drills to extend the cortical bone at the implant socketopenedsite in the order corresponding to φ 2.0, φ 2.4, and φ 2.8.The round guide is provided at the pointed tip of drill to stabilize duringcutting. Drilling for extension should be conducted gradually bypumping. For harder bone, drilling should be carefully done to reducedrill shaking.8mm6mmSL4mmDiameter: φ 2.0-2.4-2.8Material: Stainless steel (TiN coating)S: Total length; 26mmL: Total length; 32mmChapter 6 Surgical formRound barsFor bone crests with knife-edge and inadequate bone width, roundbars are used to flatten bone. In this situation, it is ideal to preparethe bone so that a support bone of more than 1mm can be providedaround the implant.14mm12mm10mm8mmSLS: Total length; 32mmL: Total length; 40mmDiameter: φ 2.5Material: Stainless steelIn cases of knife-edge bone, the flat bone preparation results inshortening intraosseous length due to the decrease in verticalbone mass.17 SURGICAL MANUAL FOR PLATON IMPLANT SYSTEM