Sony HVL-F42AM - HVL-F42AM Istruzioni per l'uso Spagnolo

3 Press the LEVEL button to select the power level to be
set.
• The power level is changed in following order.
1/1 t 1/2 t 1/4 t 1/8 t 1/16 t 1/32 t 1/1 t . . .
• For details on setting the power level, refer to page 49.
• The flash range check indication of the TEST button (blinks in green) does not
work after a photo is taken with the manual flash.
• Using custom functions, manual flash may be selected without setting the
camera in the M mode (page 44).
Applications
TTL flash
Manual flash provides a fixed flash intensity irrespective of the brightness of
the subject and the camera setting. TTL* flash measures the light from the
subject that is reflected through the lens.
Some cameras enable P-TTL metering, which adds pre-flash to TTL metering,
and ADI metering, which adds distance data to the P-TTL metering.
This flash unit defines all P-TTL and ADI metering as TTL flash and the
LEVEL lamp [AUTO] on the display panel lights up.
*TTL = through the lens
• ADI metering is possible in combination with a lens with a built-in distance
encoder. Before using the ADI metering function, check whether your lens
has a built-in distance encoder by referring to the specifications in the
operating instructions supplied with your lens.
33 GB