Brother TD-2120N - Guida ai comandi Raster
Brother TD-2120N - Guida ai comandi Raster
Brother TD-2120N - Guida ai comandi Raster
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Raster</strong> Command Reference<br />
Explanation of “TIFF compression mode”<br />
With compression, the data for the “raster graphics transfer” command is based on 56 bytes<br />
(<strong>TD</strong>-2020/<strong>2120N</strong>) or 84 bytes (<strong>TD</strong>-2130N) of the total number of pins (<strong>TD</strong>-2020/<strong>2120N</strong>: 448 and <strong>TD</strong>-2130N:<br />
672). As shown below, with no compression, the sum of the number of offset pins and the number of pins<br />
within the print area is the byte data. However, with compression, the number of unused pins is also added to<br />
the data. In other words, with compression, this becomes 104 bytes when it is expanded by the printer,<br />
regardless of the tape width.<br />
<strong>Raster</strong> line with<br />
compression<br />
<strong>Raster</strong> line with<br />
no compression<br />
0 pin<br />
First byte<br />
Number<br />
of offset<br />
pins<br />
Tape margin<br />
Total<br />
number<br />
of pins<br />
Number of<br />
print area<br />
pins<br />
Print area<br />
Number<br />
of unused<br />
pins<br />
Pins on print head<br />
Last byte<br />
Feeding direction<br />
- 32 -<br />
4. Printing Command Det<strong>ai</strong>ls