KitchenAid 20182297 PRO A71 S - Cooker - 20182297 PRO A71 S - Cooker EUR (852755901000) Istruzioni per l'Uso

ENGLISH 150
Electrical connection
Instructions for the installer
Before connecting the appliance, make sure
1N ~ 230 V 3 x 1.5 mm 2
that:
• Disconnect the power plug and close the
1. the house electrical power supply
gas tap before carrying out any repairs
nominal voltage matches that of the
or operation.
appliance, as given on the rating plate; • The qualified technician is responsible
2. the power supply line to which the
for the correct electrical and gas
appliance is connected is of adequate
power with respect to the max. power
installation according to current safety
regulations.
absorbed by the appliance, as given on • Grounding of the appliance is
the rating plate;
mandatory by law.
3. the house electrical system has a correct The Manufacturer declines any responsibility
•
grounding system.
An omnipolar switch with a distance of
for possible damage to persons, animals
or things due to non-compliance with the
at least 3 mm between contacts must be
installed.
above mentioned regulations. The technical
data is given on the rating plate located
NOTE: after installation, the electrical
components must only be accessible with
the use of a special tool.
The power cord must be of the H05RR-F
type, in compliance with the table given
below.
on the back side of the appliance. The
adjustment conditions are given on a label
applied on the packing. Do not use the oven
door handle grip for handling operations,
or for removing the appliance from the
packing.
Power supply
voltage
Number of wires x
dimensions
This appliance is in Class 1 (free standing
appliance).