Miele Dynamic U1 Allergy PowerLine - SHCF3 - Istruzioni d'uso
Miele Dynamic U1 Allergy PowerLine - SHCF3 - Istruzioni d'uso
Miele Dynamic U1 Allergy PowerLine - SHCF3 - Istruzioni d'uso
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
en<br />
Illustrations<br />
The illustrations referred to in the text<br />
are shown on the fold-out pages at<br />
the end of these operating instructions.<br />
Preparing for use<br />
Assembling the vacuum cleaner<br />
(dia. 01)<br />
Raise the vacuum cleaner into the<br />
vertical position.<br />
Insert the handle into the vacuum<br />
cleaner until it clicks into position.<br />
Activating the exhaust filter<br />
TimeStrip change indicator on the<br />
exhaust filter<br />
Depending on model, your vacuum<br />
cleaner will be fitted as standard with<br />
one of the following exhaust filters (dia.<br />
02).<br />
a AirClean<br />
b Active AirClean 30 (black)<br />
c HEPA AirClean 30 (white)<br />
If your vacuum cleaner is fitted with filter<br />
b or c, you need to activate the exhaust<br />
filter TimeStrip change indicator.<br />
Open the lid of the exhaust filter compartment<br />
and pull the exhaust filter a<br />
little way out of the holder (dia. 03).<br />
Remove the label, then put the exhaust<br />
filter back in again (dia. 04).<br />
Press the exhaust filter TimeStrip<br />
change indicator (dia. 05).<br />
After approx. 10 - 15 seconds, a thin<br />
red line will appear in the left hand side<br />
of the display (dia. 06).<br />
Close the exhaust filter compartment<br />
lid.<br />
How the exhaust filter timestrip<br />
works<br />
The exhaust filter timestrip indicator<br />
shows the remaining functional life of<br />
the exhaust filter. After approx. 50 operating<br />
hours, or approx. one year of average<br />
use, the display will be completely<br />
filled with red (dia. 07).<br />
Use<br />
Unwind the mains cable (dia. 08)<br />
The lower cable hook swivels.<br />
Turn it upwards to release the cable.<br />
Winding up the mains cable (dia. 09)<br />
When the vacuum cleaner is not in use,<br />
the cable can be wound around the two<br />
cable hooks.<br />
Secure the mains cable by clamping the<br />
plug to the cable (see detail).<br />
Mains cable whilst vacuuming<br />
(dia. 10)<br />
Whilst vacuuming, the mains cable<br />
can be fed through the guide at the<br />
side of the upper cable hook.<br />
This way the mains cable will not get in<br />
the way during vacuuming. This also<br />
protects the cable from becoming<br />
kinked.<br />
To release the vacuum cleaner<br />
(dia. 11)<br />
Step on the foot release briefly and<br />
tilt the vacuum cleaner to a comfortable<br />
position for vacuuming.<br />
37
Change language