11.03.2018 Views

Miele Dynamic U1 Allergy PowerLine - SHCF3 - Istruzioni d'uso

Miele Dynamic U1 Allergy PowerLine - SHCF3 - Istruzioni d'uso

Miele Dynamic U1 Allergy PowerLine - SHCF3 - Istruzioni d'uso

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

en<br />

The dustbag has a closing flap which<br />

closes automatically when the dust<br />

compartment lid is raised to prevent<br />

any dust escaping.<br />

Fit the new dustbag into the holder as<br />

far as it will go. Leave it folded up<br />

when you take it out of the box.<br />

It should be unfolded as far as possible<br />

in the dust compartment.<br />

Close the dust compartment lid securely,<br />

making sure it clicks into position.<br />

Take care not to trap the dustbag<br />

when doing so. The dustbag is<br />

then automatically guided into position<br />

for vacuuming.<br />

The lid will not close without a<br />

dustbag in place. Do not force it!<br />

When to change the motor protection<br />

filter<br />

Replace this filter every time you start a<br />

new packet of dustbags.<br />

Every packet of original <strong>Miele</strong> dustbags<br />

contains a motor protection filter. Multipacks<br />

contain four motor protection<br />

filters.<br />

How to change the dust compartment<br />

filter (dia. 25)<br />

Open the dust compartment lid.<br />

Remove the dustbag.<br />

Unclip the filter frame in the dust<br />

compartment and remove the old filter.<br />

Hold by the clean, unsoiled section<br />

to remove it.<br />

Replace with a new dust compartment<br />

filter.<br />

Close the filter frame.<br />

Fit the dustbag into the holder as far<br />

as it will go.<br />

Close the dust compartment lid securely,<br />

making sure it clicks into position.<br />

Take care not to trap the dustbag<br />

when doing so.<br />

When to replace the exhaust filter<br />

Depending on the model, your vacuum<br />

cleaner will be fitted as standard with<br />

one of the following exhaust filters (dia.<br />

02).<br />

a AirClean<br />

Replace this filter every time you start a<br />

new packet of dustbags. Every packet<br />

of original <strong>Miele</strong> dustbags contains one<br />

AirClean exhaust filter. Multipacks contain<br />

four AirClean filters.<br />

b Active AirClean 30 (black)<br />

c HEPA AirClean 30 (white)<br />

Replace this filter when the exhaust filter<br />

TimeStrip change indicator is completely<br />

red (dia. 07). The indicator lights<br />

up after approximately 50 hours of operation,<br />

which is equivalent to about a<br />

year of average use. You can continue<br />

vacuuming when the light comes on.<br />

However, the suction power will be reduced<br />

as will the effectiveness of the filter<br />

if it is not replaced in good time.<br />

How to replace the AirClean exhaust<br />

filter (dia. 26, 27 + 28)<br />

Do not use more than one exhaust filter<br />

at a time.<br />

Open the exhaust filter compartment<br />

lid.<br />

Remove the filter grille.<br />

42

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!