Miele Dynamic U1 Allergy PowerLine - SHCF3 - Istruzioni d'uso
Miele Dynamic U1 Allergy PowerLine - SHCF3 - Istruzioni d'uso
Miele Dynamic U1 Allergy PowerLine - SHCF3 - Istruzioni d'uso
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Problem solving guide<br />
Many malfunctions and faults that can occur in daily operation can be easily<br />
remedied. Time and money will be saved because a service call will not be<br />
needed.<br />
The following guide may help you to find the reason for a malfunction or a fault,<br />
and to correct it.<br />
en<br />
Problem<br />
The vacuum cleaner<br />
switches off automatically.<br />
The Electrobrush<br />
switches itself off. The<br />
Electrobrush indicator<br />
light is lit up red.<br />
Cause and remedy<br />
The overheating protection mechanism has been activated<br />
due to overheating or a blockage.<br />
The vacuum cleaner in-operation indicator light will<br />
light up red.<br />
Switch the Electrobrush and the vacuum cleaner<br />
off, switch off at the wall socket and remove the<br />
plug.<br />
Check the vacuum cleaner for any blockages and<br />
check all the filters in the vacuum cleaner.<br />
Once the blockage has been removed, do not use the<br />
vacuum cleaner for about 20 - 30 minutes to allow it<br />
to cool down.<br />
The red light indicates a blockage in the roller; for example,<br />
due to a large item being vacuumed up.<br />
Switch the Electrobrush and the vacuum cleaner<br />
off, switch off at the wall socket and remove the<br />
plug.<br />
Remove the blockage.<br />
The vacuum cleaner can then be used again.<br />
45