L2106VC L2108VC - Flex

Angle grinder L 2106VC, L 2108 VCFor your safetyDanger!Before using the angle grinder, please readand follow:– these operating instructions,– the “General safety instructions” on thehandling of power tools in the enclosedbooklet (leaflet-no. 315.915),– the currently valid site rules and theregulations for the prevention ofaccidents.This angle grinder is state of the art and hasbeen constructed in accordance with theacknowledged safety regulations.Nevertheless, when in use, the power toolmay be a danger to life and limb of the useror a third party, or the power tool or otherproperty may be damaged. The anglegrinder may be operated only if it is– used as intended,– in perfect working order.Faults which impair safety must be repairedimmediately.NoiseCautionWear ear protection at a sound pressureabove 85 dB(A).Measured according to EN 50144::Sound pressureL PAdB(A)Sound powerL WAdB(A)L2106VC 90 103L2108VC 90 103VibrationWeighted effective value of accelerationaccording to EN 50144: 5 m/s²Intended useThis angle grinder– is designed for industrial applications,– for dry grinding and cutting metal andstone with rough wheels and cutting-offwheels which are permitted to operateat a circumferential speed of 80 m/s,– for surface grinding metal and stone withtapered cup wheels up to 110 mm indiameter which are permitted to operateat a circumferential speed of 50 m/s,– for surface grinding with sanding sheetson a backing pad which has beendesigned to operate at the speed of themachine.– for derusting and cleaning with cupbrushes which have been designed tooperate at the speed of the machine.– for use with grinding tools andaccessories which are indicated inthese instructions or recommendedby the manufacturer.If stone is cut with fibre-reinforced cutting-offwheels, guide supports must be used.FLEX has suitable cutting guards in its rangeof accessories.Not permitted are e.g. chain cutting wheels,saw blades.Safety instructionsnnnnDanger!When using the power tool,wear protective equipment:Goggles, dust mask, ear protection,protective gloves, sturdy shoes.If required, also wear an apron!Always guide the angle grinder with bothhands. The handle (5) must be attached!Do not clamp the angle grinder in a vice.Always lay the power cord (9) to the rearaway from the angle grinder.14