çeneli kırıcıda ufalanan kromitlerin tane şekil karakterizasyonu

123[16] Ulusoy, U., Yekeler, M., ve Hiçyılmaz, C., Kalsit mineralinin şekil,pürüzlülük ve ıslanabilirliğinin karakterizasyonu”, Madencilik, 11-24, 2004,[17] Hiçyılmaz, C., Ulusoy, U., and Yekeler, M., “Flotation responses to themorphological properties of particles measured with three-dimensionalapproach”, International Journal of Mineral Processing, 75, 229-239, 2005.[18] Kaya, E., Kumar, S.R. and Hogg, R., “Particle shape characterization usingımage analysis technique”, Chancing Scopes in Mineral Processing,Kemal,Arslan,Akar& Canbazoğlu (eds.), Balkema, Rotterdam, 47-52, 1996.[19] Tsubaki. J. and Jimbo, G., “A Proposed new characterization of particle shapeand its application”, Powder Technology, 22, 161-169, 1979.[20] Holt, C.B., “The shape of particles produced by comminution: A Review”,Powder Technology, 59-63, 1981.[21] Ulusoy, U., Hiçyılmaz, C., ve Yekeler, M., “Determination of the shape,morphological and wettability properties of quartz and their correlations”,Minerals Engineering, 951–964, 2003.[22] Hiçyılmaz, C., Ulusoy, U., and Yekeler, M., “Effects of the shape properties oftalc and quartz particles on the wettability based separation processes”,Applied Surface Science, 233, 204–212, 2004.[23] Yekeler, M., Ulusoy, A., ve Hiçyılmaz, C., “Effect of particle shape androughness of talc mineral ground by different mills on the wettability andfloatability”, Powder Technology, 140, 68– 78, 2004.[24] Hoşten, Ç., ve Özbay, C., “A Comparison of particle bed breakage and rodmill grindıng with regard to mineral liberation and particle shape effects”,Minerals Enginering, Vol.11, No.9, 871-874, 1998.[25] Taşdemir, A., Görüntü analizi yöntemi ile ufalanmış minerallerin tane şekilkarakterizasyonu, Osmangazi Üniversitesi, Fen Bilimleri Enstitüsü, Doktoratezi, 2005.[26] Leco 2001 Image Analysis System Operator’s Manual, 1992.