ZBORNIK RADOVA- PROCEEDINGS - Početna

J. Parunov, M. Ćorak Use of NFEM in Structural Design of Ships
with Ice Notation
Fig. 2 Line load on the finite element model
Slika 2. Linijsko opterećenje modela konačnih elemenata
For the purpose of designing side shell plating, the applied extreme ice pressure is three
times the standard design ice pressure defined in the ice class rules. The pressure is to be
applied as patch load between two longitudinals, where load length is equal to two times the
longitudinal spacing, while the load height is given by the ice class. The FE model loaded by
the pressure load is presented in Figure 3.
. Fig. 3 Pressure load on the finite element model
Slika 3. Površinsko opterećenje modela konačnih elemenata
389