Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CALLTOLLFREEAT:<br />
1-833-GLOWHITE(+1-833-456-9448)<br />
1-866-GLOWHITE(+1-866-456-9448)
BENEFIT FROM ORDERING<br />
DIRECTLY FROM MANUFACTURER<br />
Quality & Warranty Guarantee<br />
GP Implants exercises great care and effort<br />
in maintaining the superior quality of its<br />
products.<br />
All GP Implants products are guaranteed to be<br />
free from defects in material and workmanship.<br />
However, should a customer find fault with any<br />
GP Implants products after using it according<br />
to the directions, the defective product will be<br />
replaced free of charge.<br />
Warning: Products should be used by licensed<br />
dentists only.<br />
1 Page 2 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Table of content<br />
# Product Page System<br />
1 All Implant Types & Sizes 9 Internal Hex<br />
2 SSI Implant 11 - 19 Internal Hex<br />
3 Temporary Abutments 20 - 21 Internal Hex<br />
4 Titanium Abutments 22 - 24 Internal Hex<br />
5 Concave Profile Abutments 25 - 26 Internal Hex<br />
6 Healing Abutments 27 Internal Hex<br />
7 Lab Analogs 28 Internal Hex<br />
8 Impression Copings 29 - 30 Internal Hex<br />
9 Castable Abutments 31 - 32 Internal Hex<br />
10 Zirconia Abutments 33 - 34 Internal Hex<br />
11 Overdentures 35 - 45 Internal Hex<br />
12 Multi Units 46 - 49 Internal Hex<br />
13 CAD/CAM 50 - 51 Internal Hex<br />
14 NSI Implant 54 - 56 Internal Hex NP<br />
15 Prosthetics for NSI Implant 57 - 61 Internal Hex NP<br />
16 CCI Implant 64 - 68<br />
17 Prosthetics for CCI Implant 69 - 84<br />
18 Stopper Surgical Kit 86 - 87<br />
19 Mini Surgical Kit 88<br />
20 Surgical Equipment 89 - 91<br />
Conical<br />
Connection<br />
Conical<br />
Connection<br />
Surgical<br />
Equipment<br />
Surgical<br />
Equipment<br />
Surgical<br />
Equipment<br />
Page 3 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
CERTIFICATES<br />
GP Implant is certified under EN ISO 9001:2008, SN<br />
EN ISO 13485:2012 MDD 93/42/EEC Annex II and is<br />
authorized to use the CE mark on all it’s products. All<br />
products are 510 (k) cleared by the FDA<br />
For online orders:<br />
https://www.gp-direct.com<br />
ISO 13485:2016<br />
FREE SALE CERTIFICATE<br />
EC Certificate - CE<br />
510(k) FDA Approval<br />
Page 4 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
State-of-the-art Facility<br />
We at GP Implants have 14 CNC SwissType Milling<br />
Machines, The advantage of the Swiss Type method<br />
is that long sections can be engraved in small<br />
diameters.<br />
As dental product safety and reliability are at<br />
the forefront of all our activities, our quality<br />
management system controls our in-house implants<br />
production process. From raw material to clean<br />
room packaging, all production stages are made inhouse<br />
in our own state-of-the-art facility.<br />
Prior to cleanroom packaging, the implants<br />
and instruments are mechanically washed<br />
and disinfected in accordance with the highest<br />
standards. The implants are then delivered to the<br />
cleanroom for packaging.<br />
More successful<br />
procedures,<br />
lower costs & better<br />
aesthetic outcomes.<br />
SSI Implant is the optimal solution for immediate<br />
implantation and immediate loading. The SSI dental<br />
implant has exceptional self-drilling capabilities<br />
and a unique spiral body design which enables it<br />
to change its position during placement and obtain<br />
very high primary stability even in very complicated<br />
clinical cases.<br />
Page 5 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
PURE SURFACE TECHNOLOGY<br />
To ensure repeatability, each and every implant is<br />
individually blasted with abrasive particles in an<br />
automated system which controls the speed, direction,<br />
pressure and size of the particles that collide with the<br />
implant. This ensures that each and every implant will<br />
undergo the same process and demonstrate the same<br />
excellent surface<br />
characteristics.<br />
Implants have a cleanliness degree of 1 according to our<br />
internal database, no alumina particles were observed.<br />
The success rate of Bone to Implant Contact (BIC) was<br />
increased & the healing process and tissue growth<br />
around the implant while eliminating the unwanted<br />
possibilities of postsurgery infections.<br />
The excellent implant surface morphology is then<br />
created by a controlled thermalacid-etching process.<br />
Finally, a high purity cleaning procedure is introduced to<br />
ensure that no foreign particles remain on the implant's<br />
surface. The cleanliness level and purity of our implants<br />
are routinely checked by XPS measurements .<br />
Our SEM images revealed major differences in the<br />
topography of the examined surfaces. Acid-etched<br />
and blasted Ti surfaces were found to have higher<br />
roughness values and a thicker TiO2 layer as compared<br />
with acid-etched and machined surfaces. Moreover,<br />
acid-etched and blasted surfaces showed high surface<br />
area differentiation, pointing to a high increase in the<br />
three-dimensional (3D) surface area over the 2D surface<br />
area compared with the other surfaces. Adsorption<br />
of plasma proteins to the acid-etched and blasted Ti<br />
surfaces was both qualitatively and quantitatively more<br />
intense compared with the machined and acid-etched<br />
surfaces. This was shown for each examined protein,<br />
total proteins and by the removal degree of the protein<br />
coat.<br />
Page 6 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
IMPLANT PACKAGING<br />
Premium blister packaging - It's simply a<br />
better package that is easier to open and<br />
more likely to maintain sterility.<br />
Implant is stored in sterille double<br />
transparent plastic tube and contains<br />
the following parts: Implant carrier,<br />
cover screw and the implant itself.<br />
Implant installation can be made by<br />
using 3 different tools; Implant Ratchet,<br />
Motor Mount 2.42mm & with a 2.42mm<br />
Key Hex driver.<br />
The implant is easily & smoothly<br />
disconnected from it's carrier after the<br />
installation without harming the bone.<br />
Page 7 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
DENTAL<br />
IMPLANTS<br />
Place, load<br />
and restore<br />
with<br />
confidence<br />
Page 8 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
DENTAL IMPLANTS<br />
1<br />
RP<br />
Hex 2.42<br />
SPIRAL SHAPE IMPLANT<br />
REGULAR PLATFORM<br />
Diameter<br />
Length<br />
Ø 3.3 Ø 3.75 Ø 4.20 Ø 5.0 Ø 6.0<br />
6.0mm L SP4206 SP5006 SP6006<br />
8.0mm L SP3308 SP3708 SP4208 SP5008 SP6008<br />
10.0mm L SP3310 SP3810 SP4210 SP5010 SP6010<br />
11.5mm L SP3311 SP3711 SP4211 SP5011 SP6011<br />
13.0mm L SP3313 SP3713 SP4213 SP5013 SP6013<br />
16.0mm L SP3316 SP3716 SP4216 SP5016<br />
2<br />
NP<br />
Hex 2.00<br />
NARROW SHAPE IMPLANT<br />
NARROW PLATFORM<br />
Length<br />
Diameter<br />
Ø 3.0<br />
10.0mm L<br />
NS3010<br />
11.5mm L<br />
NS3011<br />
13.0mm L<br />
NS3013<br />
16.0mm L<br />
NS3016<br />
3<br />
RP<br />
Hex 2.67<br />
CONICAL CONNECTION IMPLANT<br />
Diameter<br />
NARROW PLATFORM<br />
REGULAR PLATFORM<br />
Length<br />
Ø 3.5 Ø 4.2 Ø 5.0<br />
NP<br />
Hex 2.26<br />
6.0mmL CC5006<br />
8.0mm L CC3508 CC4208 CC5008<br />
NEW<br />
10.0mm L CC3510 CC4210 CC5010<br />
11.5mm L CC3511 CC4211 CC5011<br />
13.0mm L CC3513 CC4213 CC5013<br />
16.0mm L CC3516 CC4216 CC5016<br />
NEW<br />
NEW<br />
NEW<br />
Page 9 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
INTERNAL<br />
HEX - STANDARD<br />
Page 10 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
SPIRAL<br />
SHAPE<br />
IMPLANT<br />
11<br />
YEARS<br />
Page 11 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
SPIRAL SHAPE IMPLANT<br />
SSI is the optimal solution for immediate implantation and immediate loading. The SSI dental<br />
implant has exceptional self-drilling capabilities and a unique spiral body design which enables<br />
it to change its position during placement and obtain very high primary stability even in very<br />
complicated clinical cases.<br />
*Cover screw is included<br />
One micron level between implant<br />
and abutment (Microgap) between the<br />
implant platform and the abutment is<br />
kept to an absolute minimum.<br />
INTERNAL HEX<br />
CONNECTION<br />
Rough surface on the top. Threads<br />
reaching the top of the implant.<br />
Advantage: Decreasing the crestal stress<br />
Compatilbe with other major brands<br />
Hex size 2.42mm<br />
Single Platform connection for all implant diameters<br />
Material – Titanium Ti-6AL-4V-ELI (Ti Grade 5)<br />
SLA Surface Treatment<br />
Tapered body and code. V Shape Body<br />
Design.<br />
Advantage: Very Easy Implant Insertion.<br />
Platform switch design<br />
Perfect for two stage implantation<br />
Expanding tapered implant body with<br />
double-thread self tapping design<br />
condenses bone gradually to enhance<br />
primary stability.<br />
High and consistent survival rates,<br />
over 96% after a 10 years follow up<br />
Average bone loss of
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
Implant-Abutment connection<br />
We at GP Implant LTD, believe that the esthetics and long-term success of the<br />
final restoration are greatly influenced by the design of the implant-abutment<br />
connection. The well trusted design of the internal hexagon connection is<br />
further strengthened by our ALS (Advanced Locking System) concept which<br />
incorporates very tight manufacturing tolerances in 3 critical parameters:<br />
Mating Tolerances Roundness Surface Roughness<br />
The Spiral Shape Implant (SSI) production process is specifically designed to tightly control<br />
these 3 key elements and in turn provide:<br />
Maximal rotational<br />
precision<br />
This means that the implant position<br />
recorded by the impression coping<br />
will be accurately reproduced on<br />
the laboratory model, thereby<br />
ensuring that the final restoration<br />
will be aligned exactly as intended.<br />
In addition, the risk of loosening<br />
abutment screw is greatly reduced.<br />
Minimal microgap<br />
“Microgap” between the implant<br />
platform and the abutment is<br />
kept to an absolute minimum.<br />
This has the clinical benefit of<br />
reducing the possibility of bacterial<br />
contamination and improving the<br />
long term bone level stability.<br />
SLA Surface<br />
Treatment<br />
All GP Implants feature a blasted<br />
and thermally acid-etched<br />
endosseous surface. The micro and<br />
macro structure achieved by this<br />
process facilitates an accelerated<br />
osseointegration of our implants.<br />
A SPIRAL SHAPE IMPLANT<br />
under up to x700 magnification (SEM)<br />
A SPIRAL SHAPE IMPLANT<br />
under up to x84,000 magnification (SEM)<br />
Page 13 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
QUICK IMPLANT SIZE IDENTIFICATION<br />
Length<br />
Diameter<br />
REGULAR PLATFORM<br />
Ø 3.3 Ø 3.75 Ø 4.20 Ø 5.0 Ø 6.0<br />
6.0mm L SP4206 SP5006 SP6006<br />
8.0mm L SP3308 SP3708 SP4208 SP5008 SP6008<br />
10.0mm L SP3310 SP3810 SP4210 SP5010 SP6010<br />
11.5mm L SP3311 SP3711 SP4211 SP5011 SP6011<br />
13.0mm L SP3313 SP3713 SP4213 SP5013 SP6013<br />
16.0mm L SP3316 SP3716 SP4216 SP5016<br />
Hex 2.42<br />
Ø 2.42mm Ø 2.42mm Ø 2.42mm Ø 2.42mm Ø 2.42mm<br />
RP<br />
SINGLE<br />
PROSTHETICAL<br />
PLATFORM<br />
The SSI Internal hex diameters<br />
utilize one line of prosthetic<br />
components.<br />
Page 14 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
DRILLING PROTOCOL<br />
Hex 2.42<br />
3.3<br />
RP<br />
L<br />
Drill sequence by bone type - An additional 1 mm must<br />
be added to the length of the drill to account for the angled<br />
cutting tip.<br />
D-I, D-II Dense bone considerations - Countersink<br />
should be used if the standard dense bone protocol is not<br />
sufficient to fully seat the implant without exceeding the<br />
recommended maximum insertion torque of max. 60Ncm<br />
for implant Ø3.75mm and above. Do not exceed max.<br />
45Ncm for implants diameter lower than 3.75mm.<br />
SP3308<br />
L 8.0mm<br />
SP3310<br />
L 10.0mm<br />
SP3311<br />
L 11.5mm<br />
SP3313<br />
L 13.0mm<br />
SP3316<br />
L 16.0mm<br />
Soft Bone<br />
Dense Bone<br />
Drilling<br />
Speed - RPM<br />
1200-<br />
1500<br />
900-<br />
1,200<br />
700-<br />
900<br />
500-<br />
700<br />
Diameter<br />
Ø 1.9 Ø 2.0 Ø 2.8 Ø 3.2<br />
Optional<br />
*The procedure recommended by GP Implant LTD cannot replace the judgment and the experience of the surgeon.<br />
Page 15 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
DRILLING PROTOCOL<br />
Hex 2.42<br />
3.75<br />
RP<br />
L<br />
Drill sequence by bone type - An additional 1 mm must<br />
be added to the length of the drill to account for the angled<br />
cutting tip.<br />
D-I, D-II Dense bone considerations - Countersink<br />
should be used if the standard dense bone protocol is not<br />
sufficient to fully seat the implant without exceeding the<br />
recommended maximum insertion torque of max. 60Ncm<br />
for implant Ø3.75mm and above. Do not exceed max.<br />
45Ncm for implants diameter lower than 3.75mm.<br />
SP3708<br />
L 8.0mm<br />
SP3710<br />
L 10.0mm<br />
SP3711<br />
L 11.5mm<br />
SP3713<br />
L 13.0mm<br />
SP3716<br />
L 16.0mm<br />
Soft Bone<br />
Dense Bone<br />
Drilling<br />
Speed - RPM<br />
1200-<br />
1500<br />
900-<br />
1,200<br />
700-<br />
900<br />
500-<br />
700<br />
200-<br />
400<br />
Diameter<br />
Ø 1.9 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.75/4.2<br />
Optional<br />
*The procedure recommended by GP Implant LTD cannot replace the judgment and the experience of the surgeon.<br />
Page 16 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
DRILLING PROTOCOL<br />
Hex 2.42<br />
4.2<br />
RP<br />
L<br />
Drill sequence by bone type - An additional 1 mm must<br />
be added to the length of the drill to account for the angled<br />
cutting tip.<br />
D-I, D-II Dense bone considerations - Countersink<br />
should be used if the standard dense bone protocol is not<br />
sufficient to fully seat the implant without exceeding the<br />
recommended maximum insertion torque of max. 60Ncm<br />
for implant Ø3.75mm and above. Do not exceed max.<br />
45Ncm for implants diameter lower than 3.75mm.<br />
SP4206<br />
L 6.0mm<br />
SP4208<br />
L 8.0mm<br />
SP4210<br />
L 10.0mm<br />
SP4211<br />
L 11.5mm<br />
SP4213<br />
L 13.0mm<br />
SP4216<br />
L 16.0mm<br />
Soft Bone<br />
Dense Bone<br />
Drilling<br />
Speed - RPM<br />
1200-<br />
1500<br />
900-<br />
1,200<br />
700-<br />
900<br />
500-<br />
700<br />
400-<br />
600<br />
200-<br />
400<br />
Diameter<br />
Ø 1.9 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 3.5-4.2<br />
Optional<br />
*The procedure recommended by GP Implant LTD cannot replace the judgment and the experience of the surgeon.<br />
Page 17 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
DRILLING PROTOCOL<br />
Hex 2.42<br />
5.0<br />
RP<br />
L<br />
Drill sequence by bone type - An additional 1 mm must<br />
be added to the length of the drill to account for the angled<br />
cutting tip.<br />
D-I, D-II Dense bone considerations - Countersink<br />
should be used if the standard dense bone protocol is not<br />
sufficient to fully seat the implant without exceeding the<br />
recommended maximum insertion torque of max. 60Ncm<br />
for implant Ø3.75mm and above. Do not exceed max.<br />
45Ncm for implants diameter lower than 3.75mm.<br />
SP5006<br />
L 6.0mm<br />
SP5008<br />
L 8.0mm<br />
SP5010<br />
L 10.0mm<br />
SP5011<br />
L 11.5mm<br />
SP5013<br />
L 13.0mm<br />
SP5016<br />
L 16.0mm<br />
Soft Bone<br />
Dense Bone<br />
Drilling<br />
Speed - RPM<br />
1200-<br />
1500<br />
900-<br />
1,200<br />
700-<br />
900<br />
500-<br />
700<br />
400-<br />
600<br />
300-<br />
500<br />
200-<br />
400<br />
Diameter<br />
Ø 1.9 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.3 Ø 5/6<br />
Optional<br />
*The procedure recommended by GP Implant LTD cannot replace the judgment and the experience of the surgeon.<br />
Page 18 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
DRILLING PROTOCOL<br />
Hex 2.42<br />
6.0<br />
RP<br />
L<br />
Drill sequence by bone type - An additional 1 mm must<br />
be added to the length of the drill to account for the angled<br />
cutting tip.<br />
D-I, D-II Dense bone considerations - Countersink<br />
should be used if the standard dense bone protocol is not<br />
sufficient to fully seat the implant without exceeding the<br />
recommended maximum insertion torque of max. 60Ncm<br />
for implant Ø3.75mm and above. Do not exceed max.<br />
45Ncm for implants diameter lower than 3.75mm.<br />
SP6006<br />
L 6.0mm<br />
SP6008<br />
L 8.0mm<br />
SP6010<br />
L 10.0mm<br />
SP6011<br />
L 11.5mm<br />
SP6013<br />
L 13.0mm<br />
Soft Bone<br />
Dense Bone<br />
Drilling<br />
Speed - RPM<br />
1200-<br />
1500<br />
900-<br />
1,200<br />
700-<br />
900<br />
500-<br />
700<br />
400-<br />
600<br />
200-<br />
400<br />
250-<br />
450<br />
200-<br />
400<br />
Diameter<br />
Ø 1.9 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.3 Ø 5.2 Ø 5/6<br />
Optional<br />
*The procedure recommended by GP Implant LTD cannot replace the judgment and the experience of the surgeon.<br />
Page 19 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
TEMPORARY<br />
ABUTMENTS<br />
TEMPORARY TITANIUM ABUTMENT<br />
* Screw included<br />
Recommendation:<br />
Hand tighten using a 1.25mm hex driver<br />
and then use ratchet or motor mount<br />
with a force of 20 Ncm<br />
Compability:<br />
Zimmer RP®, MIS Seven®, Alpha bio®,<br />
Implant Direct Legacy®<br />
RP<br />
Type<br />
Height<br />
Ncm<br />
Ø mm<br />
GP-TEMPA2<br />
Hex<br />
11.0 mm<br />
20 Ncm<br />
Ø 4.5 mm<br />
RP<br />
Type<br />
Height<br />
Ncm<br />
Ø mm<br />
GP-TEMPA1<br />
Non Hex<br />
11.0 mm<br />
20 Ncm<br />
Ø 4.5 mm<br />
Page 20 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
PEEK<br />
ABUTMENTS<br />
ANATOMIC PEEK ABUTMENTS<br />
* Screw included<br />
Compability:<br />
Zimmer RP®, MIS Seven®, Alpha bio®,<br />
Implant Direct Legacy®<br />
RP<br />
GP-PEEK01<br />
GP-PEEK02<br />
GP-PEEK03<br />
GP-PEEK04<br />
Abutment Height<br />
10.5 mm<br />
11.5 mm<br />
12.5 mm<br />
13.0 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
15°<br />
RP<br />
GP-PEEK1501<br />
GP-PEEK1502<br />
GP-PEEK1503<br />
GP-PEEK1504<br />
Abutment Height<br />
9.0 mm<br />
10.0 mm<br />
11.0 mm<br />
12.0 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
25°<br />
RP<br />
GP-PEEK2501<br />
GP-PEEK2502<br />
GP-PEEK2503<br />
GP-PEEK2504<br />
Abutment Height<br />
9.0 mm<br />
10.0 mm<br />
11.0 mm<br />
12.0 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Page 21 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
TITANIUM<br />
ABUTMENTS<br />
STRAIGHT ABUTMENTS<br />
* Screw included<br />
Compability:<br />
Zimmer RP®, MIS Seven®, Alpha bio®,<br />
Implant Direct Legacy®<br />
RP<br />
GP-STA05<br />
GP-STA07<br />
GP-STA09<br />
GP-STA11<br />
Abutment Height<br />
5.0 mm<br />
7.0 mm<br />
9.0 mm<br />
11.5 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 4.6 mm<br />
Ø 4.6 mm<br />
Ø 4.6 mm<br />
Ø 4.6 mm<br />
STRAIGHT ABUTMENTS<br />
* Screw included<br />
RP<br />
Abutment Height<br />
Ncm<br />
Ø mm<br />
GP-WSTA09<br />
9.0 mm<br />
25 Ncm<br />
Ø 5.5 mm<br />
GP-WSTA12<br />
12.0 mm<br />
25 Ncm<br />
Ø 5.5 mm<br />
STRAIGHT SLIM ABUTMENTS<br />
* Screw included<br />
RP<br />
GP-SNA05<br />
GP-SNA07<br />
GP-SNA09<br />
GP-SNA11<br />
Abutment Height<br />
5.0 mm<br />
7.0 mm<br />
9.0 mm<br />
11.5 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 3.85 mm<br />
Ø 3.85 mm<br />
Ø 3.85 mm<br />
Ø 3.85 mm<br />
Page 22 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
STRAIGHT ABUTMENTS WITH COLLAR<br />
APPROVED<br />
* Screw included<br />
RP<br />
GP-STSH01<br />
GP-STSH02<br />
GP-STSH03<br />
Abutment Height<br />
9.0 mm<br />
10.0 mm<br />
11.5 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
STRAIGHT ANATOMIC ABUTMENTS<br />
* Screw included<br />
RP<br />
GP-SAA01<br />
GP-SAA02<br />
GP-SAA03<br />
Abutment Height<br />
10.0 mm<br />
11.0 mm<br />
12.0 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
ANGULATED ABUTMENT 15 DEGREES<br />
* Screw included<br />
15°<br />
RP<br />
Abutment Height<br />
Ncm<br />
Ø mm<br />
GP-AB15<br />
9.0 mm<br />
25 Ncm<br />
Ø 4.8 mm<br />
GP-ABL15<br />
11.5 mm<br />
25 Ncm<br />
Ø 4.8 mm<br />
Page 23 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
ANGULATED ABUTMENT 25 DEGREES<br />
APPROVED<br />
* Screw included<br />
25°<br />
RP<br />
Abutment Height<br />
Ncm<br />
Ø mm<br />
GP-AB25<br />
9.0 mm<br />
25 Ncm<br />
Ø 4.8 mm<br />
GP-ABL25<br />
11.5 mm<br />
25 Ncm<br />
Ø 4.8 mm<br />
ANGULATED ABUTMENT 15 DEGREES WITH COLLAR<br />
* Screw included<br />
15°<br />
RP<br />
GP-AB15-1<br />
GP-AB15-2<br />
GP-AB15-3<br />
Abutment Height<br />
9.0 mm<br />
10.5 mm<br />
11.5 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
ANGULATED ABUTMENT 25 DEGREES WITH COLLAR<br />
* Screw included<br />
25°<br />
RP<br />
GP-AB25-1<br />
GP-AB25-2<br />
GP-AB25-3<br />
Abutment Height<br />
9.0 mm<br />
10.5 mm<br />
11.5 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Page 24 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
CONCAVE<br />
PROFILE<br />
Anatomical Concave Abutments<br />
The concave Innovative design creates an optimal emergence profile,<br />
enabling replacement of temporary prosthetics without harming the<br />
newly formed tissue structure.<br />
- Gives astonishing aesthetic results and reducing the metal visibility of the abutment<br />
- Ensures a secure fit between the abutment and the implant and establishes a superior primary stability<br />
- Stabilized the gingival architecture immediately after extraction or implant placement<br />
- Eliminates the need for soft tissue reshaping after tooth removal or implant placement<br />
- Optimal emergence profile<br />
- Accelerates gingival healing<br />
- Highest grade of titanium alloy (5)<br />
- Biocompatible<br />
HEALING CAP - CONCAVE PROFILE<br />
RP<br />
GP-HCC02<br />
GP-HCC03<br />
GP-HCC04<br />
GP-HCC05<br />
GP-HCC06<br />
GP-HCC07<br />
Height<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
6.0 mm<br />
7.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Page 25 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP RP<br />
SPIRAL<br />
Internal<br />
SHAPE<br />
Hex<br />
INTERNAL<br />
- Regular Platform<br />
HEX<br />
3.75mm<br />
STRAIGHT ABUTMENT - CONCAVE PROFILE<br />
APPROVED<br />
* Screw included<br />
RP<br />
GP-CCSA01<br />
GP-CCSA02<br />
GP-CCSA03<br />
GP-CCSA04<br />
Abutment Height<br />
9.0 mm<br />
10.0 mm<br />
11.0 mm<br />
12.0 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
ANGULATED ABUTMENT 15 DEGREES - CONCAVE PROFILE<br />
* Screw included<br />
15°<br />
RP<br />
GP-CCA1501<br />
GP-CCA1502<br />
GP-CCA1503<br />
GP-CCA1504<br />
Abutment Height<br />
9.0 mm<br />
10.0 mm<br />
11.0 mm<br />
12.0 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
ANGULATED ABUTMENT 25 DEGREES - CONCAVE PROFILE<br />
* Screw included<br />
25°<br />
RP<br />
GP-CCA2501<br />
GP-CCA2502<br />
GP-CCA2503<br />
GP-CCA2504<br />
Abutment Height<br />
9.0 mm<br />
10.0 mm<br />
11.0 mm<br />
12.0 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Page 26 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
HEALING<br />
ABUTMENTS<br />
HEALING ABUTMENT Ø 4.6 mm<br />
RP<br />
GP-H002<br />
GP-H003<br />
GP-H004<br />
GP-H005<br />
GP-H006<br />
GP-H007<br />
Height<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
6.0 mm<br />
7.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 4.6 mm<br />
Ø 4.6 mm<br />
Ø 4.6 mm<br />
Ø 4.6 mm<br />
Ø 4.6 mm<br />
Ø 4.6 mm<br />
HEALING ABUTMENT Ø 5.5 mm<br />
RP<br />
GP-HW002<br />
GP-HW003<br />
GP-HW004<br />
GP-HW005<br />
GP-HW006<br />
Height<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
6.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 5.5 mm<br />
Ø 5.5 mm<br />
Ø 5.5 mm<br />
Ø 5.5 mm<br />
Ø 5.5 mm<br />
HEALING ABUTMENT Ø 6.3 mm<br />
RP<br />
GP-HWE002<br />
GP-HWE003<br />
GP-HWE004<br />
GP-HWE005<br />
GP-HWE006<br />
Height<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
6.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 6.3 mm<br />
Ø 6.3 mm<br />
Ø 6.3 mm<br />
Ø 6.3 mm<br />
Ø 6.3 mm<br />
Page 27 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
LAB<br />
ANALOGS<br />
When using Ø5.0 mm or Ø6.0 mm implants, it is<br />
recommended to use the wide lab analog, in order to have<br />
a most complete and trustworthy rendering of the clinical<br />
situation.<br />
IMPLANT LAB ANALOG - STAINLESS STEEL<br />
RP<br />
GP-AN<br />
RP<br />
GP-WAN<br />
Height<br />
12.0 mm<br />
Height<br />
12.0 mm<br />
Type<br />
Standard<br />
Type<br />
Wide Profile<br />
Ø mm<br />
Ø 3.75 mm<br />
Ø mm<br />
Ø 5.0 mm<br />
ANALOG FOR LOCATORS - STAINLESS STEEL<br />
ANALOG FOR BALL ATTACHMENT - STAINLESS STEEL<br />
RP<br />
GP-LOAN<br />
RP<br />
GP-BAAN<br />
Height<br />
10.0 mm<br />
Height<br />
15.0 mm<br />
Type<br />
For Locator<br />
Type<br />
For Ball Attachment<br />
Ø mm<br />
Ø 3.75 mm<br />
Ø mm<br />
Ø 3.75 mm<br />
ANALOG FOR LOW PROFILE LOCK - STAINLESS STEEL<br />
RP<br />
Height<br />
Type<br />
Ø mm<br />
GP-LOCAN<br />
15.0 mm<br />
Standard<br />
Ø 4.4 mm<br />
Page 28 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
IMPRESSION<br />
COPINGS<br />
TRANSFERS FOR IMPRESSIONS<br />
* Screw included<br />
RP<br />
Height<br />
Type<br />
Ø mm<br />
GP-CT4708<br />
10.0 mm<br />
Closed Tray<br />
Ø 4.75 mm<br />
GP-OT4712<br />
13.0 mm<br />
Opened Tray<br />
Ø 4.75 mm<br />
CLIP TRANSFERS FOR IMPRESSIONS<br />
RP<br />
Height<br />
Type<br />
Ø mm<br />
GP-CO4709<br />
9.0 mm<br />
Closed Tray<br />
Ø 4.5 mm<br />
GP-CO4715<br />
15.0 mm<br />
Closed Tray<br />
Ø 4.5 mm<br />
SNAP-ON TRANSFERS WITH ANATOMIC COLLAR<br />
* Screw included<br />
RP<br />
GP-CTS01<br />
GP-CTS02<br />
GP-CTS03<br />
GP-CTS04<br />
Abutment Height<br />
7.0 mm<br />
8.0 mm<br />
9.0 mm<br />
10.0 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Page 29 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
ANGULATED SNAP-ON TRANSFERS - CONCAVE PROFILE<br />
* Screw included<br />
15°<br />
RP<br />
GP-CCT1501<br />
GP-CCT1502<br />
GP-CCT1503<br />
GP-CCT1504<br />
Abutment Height<br />
2.0mm<br />
3.0mm<br />
4.0mm<br />
5.0mm<br />
Collar Height<br />
1.0mm<br />
2.0mm<br />
3.0mm<br />
4.0mm<br />
Degrees<br />
15°<br />
15°<br />
15°<br />
15°<br />
25°<br />
RP<br />
GP-CCT2501<br />
GP-CCT2502<br />
GP-CCT2503<br />
GP-CCT2504<br />
Abutment Height<br />
2.0mm<br />
3.0mm<br />
4.0mm<br />
5.0mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Degrees<br />
25°<br />
25°<br />
25°<br />
25°<br />
SNAP-ON TRANSFERS - CONCAVE PROFILE<br />
* Screw included<br />
RP<br />
GP-CCT150<br />
GP-CCT250<br />
GP-CCT350<br />
GP-CCT450<br />
Collar Height<br />
1.5 mm<br />
2.5 mm<br />
3.5 mm<br />
4.5 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Page 30 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
CASTABLE<br />
ABUTMENTS<br />
PLASTIC CASTABLE ABUTMENT<br />
* Screw included<br />
Plastic Castable abutments are intended for use<br />
by the technician for simple casting of custommade<br />
abutments for constructing the prosthetic<br />
RP<br />
Height<br />
GP-PH<br />
9.5 mm<br />
GP-PHR<br />
9.5 mm<br />
restoration.<br />
Type<br />
Hex<br />
Rotational<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 4.0 mm<br />
Ø 4.0 mm<br />
CASTABLE ABUTMENT WITH Co-Cr BASE<br />
* Screw included<br />
RP<br />
Height<br />
Type<br />
Ncm<br />
Ø mm<br />
GP-PHC<br />
11.0 mm<br />
Hex<br />
20 Ncm<br />
Ø 4.3 mm<br />
The Casting abutment with CoCr base is made out<br />
of Chrome Cobalt. Casting abutments with pressfit<br />
plastic sleeve are used for customized prosthetic<br />
restorations.<br />
CASTABLE ABUTMENT WITH TITANIUM BASE<br />
* Screw included<br />
RP<br />
Height<br />
Type<br />
Ncm<br />
Ø mm<br />
GP-PHT<br />
11.0 mm<br />
Hex<br />
20 Ncm<br />
Ø 4.3 mm<br />
Plastic Castable Abutments on Titanium Bases<br />
enable the dental laboratory to cast on an accurate<br />
Titanium base. The machined Titanium base<br />
provides an accurate fit to the implant.<br />
Page 31 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
STRAIGHT CASTABLE ANATOMIC ABUTMENT<br />
* Screw included<br />
RP<br />
GP-PCS01<br />
GP-PCS02<br />
GP-PCS03<br />
GP-PCS04<br />
Abutment Height<br />
9.5 mm<br />
10.5 mm<br />
11.5 mm<br />
12.5 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Type<br />
Hex<br />
Hex<br />
Hex<br />
Hex<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
ANGULATED ANATOMIC CASTABLE ABUTMENT<br />
* Screw included<br />
15°<br />
RP<br />
GP-PCS1501<br />
GP-PCS1502<br />
GP-PCS1503<br />
GP-PCS1504<br />
Abutment Height<br />
8.5 mm<br />
9.5 mm<br />
10.5 mm<br />
11.5 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Type<br />
Hex<br />
Hex<br />
Hex<br />
Hex<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
25°<br />
RP<br />
GP-PCS2501<br />
GP-PCS2502<br />
GP-PCS2503<br />
GP-PCS2504<br />
Abutment Height<br />
8.5 mm<br />
9.5 mm<br />
10.5 mm<br />
11.5 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Type<br />
Hex<br />
Hex<br />
Hex<br />
Hex<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Page 32 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
ZIRCONIA<br />
ABUTMENTS<br />
Hybrid Zirconium Abutments Zirconia and Titanium base -<br />
A highly aesthetic alternative to the metal abutments. Due to its unsurpassed biocompatibility,<br />
life-like color, and excellent mechanical properties, Zirconia is a high-end replacement for any<br />
metal abutment. Its also known for its extraordinary strength and durability that could last for a<br />
long period of time. Zirconia is highly resistant to any kind of intra-oral acids which guarantees a<br />
long-lasting restoration and patient peace of mind.<br />
• Ability to be sterilized without degradation in mechanical properties or biocompatibility.<br />
• Compatibility with X-ray, MRI and CT imaging without producing artifacts.<br />
• Excellent mechanical properties such as stiffness and durability similar to the titanium.<br />
• High compressive strength.<br />
• Proven hard and soft tissue biocompatibility.<br />
• Natural color for excellent aesthetics.<br />
Page 33 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
STRAIGHT ZIRCONIA ABUTMENT<br />
* Screw included<br />
RP<br />
Abutment Height<br />
Collar Height<br />
Type<br />
Ncm<br />
Ø mm<br />
GP-Z10<br />
10.0 mm<br />
1.5 mm<br />
Anatomic<br />
15 Ncm<br />
Ø 4.8 mm<br />
ANGULATED ZIRCONIA ANATOMIC ABUTMENT<br />
* Screw included<br />
15°<br />
RP<br />
GP-Z1501<br />
GP-Z1502<br />
GP-Z1503<br />
Abutment Height<br />
10.0 mm<br />
10.5 mm<br />
11.5 mm<br />
Collar Height<br />
1.5 mm<br />
2.0 mm<br />
3.0 mm<br />
Type<br />
Anatomic<br />
Anatomic<br />
Anatomic<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
25°<br />
RP<br />
GP-Z2501<br />
GP-Z2502<br />
Abutment Height<br />
10.0 mm<br />
11.0 mm<br />
Collar Height<br />
2.0 mm<br />
3.0 mm<br />
Type<br />
Anatomic<br />
Anatomic<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Page 34 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
BALL<br />
ATTACHMENTS<br />
Titanium Ball Attachment<br />
The ball attachments are used for tissue and implant-supported<br />
overdentures, typically with two or more parallel implants (within 10°). Ball<br />
attachments provide firm retention and stabilization to the overdenture.<br />
BALL ATTACHMENT ABUTMENT<br />
RP<br />
GP-BA01<br />
GP-BA02<br />
GP-BA03<br />
GP-BA04<br />
GP-BA05<br />
GP-BA06<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
6.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
BALL ATTACHMENT SET<br />
SET<br />
CODE<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
GP-BA01SET<br />
1.0 mm<br />
Ball Attachment<br />
Abutment<br />
Transparent<br />
Silicon cap<br />
Black<br />
Cap<br />
Pink<br />
Cap<br />
Yellow<br />
Cap<br />
Metal<br />
Cap<br />
Protective<br />
Disk<br />
GP-BA02SET<br />
2.0 mm<br />
+<br />
GP-BA03SET<br />
GP-BA04SET<br />
3.0 mm<br />
4.0 mm<br />
GP-BA05SET<br />
5.0 mm<br />
GP-B2506<br />
GP-B2507<br />
GP-B2505<br />
GP-B2504<br />
GP-BAMH<br />
GP-BDISK<br />
GP-BA06SET<br />
6.0 mm<br />
Page 35 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
ANGULATED BALL ATTACHMENT<br />
Angulated Ball Attachment<br />
• Suitable for all-on-4/all-on-6 and partial denture restorations.<br />
• Functional and easy application.<br />
• Solid one-piece structure for more durability and stability.<br />
• High-quality, clinically proven materials (Titanium Alloy Grade 23).<br />
• Precise, stable retention.<br />
• Compact design for a high level of wearing comfort and ease of cleaning.<br />
• Attractive price/performance ratio.<br />
18°<br />
RP<br />
GP-ABA1801<br />
GP-ABA1802<br />
GP-ABA1803<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
30°<br />
RP<br />
GP-ABA3001<br />
GP-ABA3002<br />
GP-ABA3003<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
40°<br />
RP<br />
GP-ABA4001<br />
GP-ABA4002<br />
GP-ABA4003<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
Page 36 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
BALL ATTACHMENT SET - 18 DEGREES<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
Ball Attachment<br />
Abutment<br />
18°<br />
+<br />
Transparent<br />
Silicon cap<br />
Black<br />
Cap<br />
Pink<br />
Cap<br />
Yellow<br />
Cap<br />
Metal<br />
Cap<br />
Protective<br />
Disk<br />
SET CODE<br />
GP-ABA1801-SET<br />
HEIGHT<br />
1.0 mm<br />
GP-ABA1802-SET<br />
2.0 mm<br />
GP-B2506<br />
GP-B2507<br />
GP-B2505<br />
GP-B2504<br />
GP-BAMH<br />
GP-BDISK<br />
GP-ABA1803-SET<br />
3.0 mm<br />
BALL ATTACHMENT SET - 30 DEGREES<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
Ball Attachment<br />
Abutment<br />
30°<br />
+<br />
Transparent<br />
Silicon cap<br />
Black<br />
Cap<br />
Pink<br />
Cap<br />
Yellow<br />
Cap<br />
Metal<br />
Cap<br />
Protective<br />
Disk<br />
SET CODE<br />
HEIGHT<br />
GP-ABA3001-SET<br />
1.0 mm<br />
GP-ABA3002-SET<br />
2.0 mm<br />
GP-B2506<br />
GP-B2507<br />
GP-B2505<br />
GP-B2504<br />
GP-BAMH<br />
GP-BDISK<br />
GP-ABA3003-SET<br />
3.0 mm<br />
BALL ATTACHMENT SET - 40 DEGREES<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
Ball Attachment<br />
Abutment<br />
40°<br />
+<br />
Transparent<br />
Silicon cap<br />
Black<br />
Cap<br />
Pink<br />
Cap<br />
Yellow<br />
Cap<br />
Metal<br />
Cap<br />
Protective<br />
Disk<br />
SET CODE<br />
HEIGHT<br />
GP-ABA4001-SET<br />
1.0 mm<br />
GP-ABA4002-SET<br />
2.0 mm<br />
GP-B2506<br />
GP-B2507<br />
GP-B2505<br />
GP-B2504<br />
GP-BAMH<br />
GP-BDISK<br />
GP-ABA4003-SET<br />
3.0 mm<br />
Page 37 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
RETENTIVE INSERTION CAPS<br />
CAPS FOR BALL ATTACHMENT<br />
Ø 2.5mm<br />
Internal hole size<br />
Ø 2.25mm<br />
Internal hole size<br />
Ø 1.8mm<br />
Internal hole size<br />
Code<br />
GP-B2501<br />
Code<br />
GP-B2201<br />
Code<br />
GP-B1801<br />
Color<br />
Silver<br />
Color<br />
Yellow<br />
Color<br />
Yellow<br />
Size<br />
Normal Ø 2.5mm<br />
Size<br />
Normal Ø 2.25mm<br />
Size<br />
Normal Ø 1.8mm<br />
Strength<br />
0.35kg<br />
Strength<br />
0.5kg<br />
Strength<br />
0.5kg<br />
Type<br />
Elastic & Gummy<br />
Type<br />
Extra soft retention<br />
Type<br />
Extra soft retention<br />
Code<br />
GP-B2502<br />
Code<br />
GP-B2202<br />
Code<br />
GP-B1802<br />
Color<br />
Gold<br />
Color<br />
Pink<br />
Color<br />
Pink<br />
Size<br />
Normal Ø 2.5mm<br />
Size<br />
Normal Ø 2.25mm<br />
Size<br />
Normal Ø 1.8mm<br />
Strength<br />
0.5kg<br />
Strength<br />
0.9kg<br />
Strength<br />
0.9kg<br />
Type<br />
Soft retention<br />
Type<br />
Soft retention<br />
Code<br />
Color<br />
GP-B2503<br />
Green<br />
code<br />
GP-B2203<br />
Code<br />
GP-B1803<br />
Size<br />
Normal Ø 2.5mm<br />
color<br />
Mint Cap<br />
Color<br />
Transparent<br />
Strength<br />
0.35kg<br />
size<br />
Normal Ø 2.25mm<br />
Size<br />
Normal Ø 1.8mm<br />
Type<br />
Very elastic<br />
strength<br />
1.3kg<br />
Strength<br />
1.3kg<br />
type<br />
Standard retention<br />
Type<br />
Standard retention<br />
Code<br />
Color<br />
Size<br />
Strength<br />
Type<br />
GP-B2504<br />
Yellow<br />
Normal Ø 2.5mm<br />
0.5kg<br />
Extra soft retention<br />
Code<br />
Color<br />
Size<br />
Strength<br />
GP-B1804<br />
Black lab cap<br />
Normal Ø 1.8mm<br />
1.3kg<br />
Code<br />
GP-B2505<br />
Color<br />
Pink<br />
Size<br />
Normal Ø 2.5mm<br />
Strength<br />
0.9kg<br />
Type<br />
Code<br />
Soft retention<br />
GP-B2506<br />
TOOLS & PROSTHETICS<br />
Color<br />
Transparent<br />
Size<br />
Normal Ø 2.5mm<br />
Strength<br />
Type<br />
1.3kg<br />
Standard retention<br />
GP-BALTOOL<br />
Multiuse tool inserter/<br />
extractor for ball<br />
attachments<br />
Code<br />
Color<br />
Size<br />
GP-B2507<br />
Black lab cap<br />
Normal Ø 2.5mm<br />
Analog<br />
for Ball Attachment<br />
Impression Coping Transfer<br />
for Ball Attachment<br />
Strength<br />
0 kg<br />
Ø mm<br />
Ø 4.4 mm<br />
Code<br />
Color<br />
GP-BAMH<br />
Metal Housing<br />
GP-BAAN<br />
GP-BATR<br />
Size Normal Ø 4.6mm<br />
------------------------------------------------<br />
Abutment Height<br />
14.0 mm<br />
Page 38 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
PREMIUM<br />
LOCATORS<br />
The GP Implants locators indicated for use with<br />
overdentures or partial dentures retained in whole or in part by<br />
dental implants in the mandible or maxilla, the locator system offers<br />
both males and extended range males which are designed for maximum<br />
versatility and retention and angulation to suit each patient's needs.<br />
The Locators overdenture attachment system continues preferable<br />
choice of clinicians worldwide, patients all over the world are enjoying an<br />
unprecedented quality of life without the worry of ill-fitting dentures thanks<br />
to our Locators overdenture system.<br />
STRAIGHT LOCATOR ABUTMENT<br />
RP<br />
GP-LC01<br />
GP-LC02<br />
GP-LC03<br />
GP-LC04<br />
GP-LC05<br />
GP-LC06<br />
Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
6.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 3.5 mm<br />
Ø 3.5 mm<br />
Ø 3.5 mm<br />
Ø 3.5 mm<br />
Ø 3.5 mm<br />
Ø 3.5 mm<br />
STRAIGHT LOCATOR SET<br />
SET CODE<br />
HEIGHT<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
GP-LC01-SET<br />
1.0 mm<br />
Locator<br />
Abutment<br />
Transparent<br />
Cap<br />
Pink<br />
Cap<br />
Violet<br />
Cap<br />
Yellow<br />
Cap<br />
Metal<br />
Housing<br />
Protective<br />
Disk<br />
GP-LC02-SET<br />
2.0 mm<br />
+<br />
GP-LC03-SET<br />
GP-LC04-SET<br />
3.0 mm<br />
4.0 mm<br />
GP-LC05-SET<br />
5.0 mm<br />
GP-LOC101<br />
GP-LOC104<br />
GP-LOC103<br />
GP-LOC102<br />
GP-LOCMH<br />
GP-LOCDISK<br />
GP-LC06-SET<br />
6.0 mm<br />
Page 39 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
ANGULATED LOCATOR - 18 DEGREES<br />
APPROVED<br />
* Screw included<br />
18°<br />
RP<br />
GP-LC1815<br />
GP-LC1820<br />
GP-LC1830<br />
GP-LC1840<br />
Collar Height<br />
1.5 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
ANGULATED LOCATOR - 30 DEGREES<br />
* Screw included<br />
30°<br />
RP<br />
GP-LC3025<br />
GP-LC3030<br />
GP-LC3040<br />
GP-LC3050<br />
Height<br />
2.5 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
ANGULATED LOCATOR SET - 18 DEGREES<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
Locator<br />
Abutment<br />
Transparent<br />
Cap<br />
Pink<br />
Cap<br />
Violet<br />
Cap<br />
Yellow<br />
Cap<br />
Metal<br />
Housing<br />
Protective<br />
Disk<br />
SET CODE<br />
HEIGHT<br />
18°<br />
+<br />
GP-LC1815-SET<br />
1.5 mm<br />
GP-LC1820-SET<br />
2.0 mm<br />
GP-LC1830-SET<br />
3.0 mm<br />
GP-LOC101<br />
GP-LOC104<br />
GP-LOC103<br />
GP-LOC102<br />
GP-LOCMH<br />
GP-LOCDISK<br />
GP-LC1840-SET<br />
4.0 mm<br />
ANGULATED LOCATOR SET - 30 DEGREES<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
Locator<br />
Abutment<br />
Transparent<br />
Cap<br />
Pink<br />
Cap<br />
Violet<br />
Cap<br />
Yellow<br />
Cap<br />
Metal<br />
Housing<br />
Protective<br />
Disk<br />
SET CODE<br />
HEIGHT<br />
30°<br />
+<br />
GP-LC3025-SET<br />
2.5 mm<br />
GP-LC3030-SET<br />
3.0 mm<br />
GP-LC3040-SET<br />
4.0 mm<br />
GP-LOC101<br />
GP-LOC104<br />
GP-LOC103<br />
GP-LOC102<br />
GP-LOCMH<br />
GP-LOCDISK<br />
GP-LC3050-SET<br />
5.0 mm<br />
Page 40 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
RETENTIVE INSERTION CAPS<br />
CAPS FOR LOCATORS<br />
Code<br />
GP-LOC101<br />
Code<br />
GP-LOC103<br />
Code<br />
GP-LOCMH<br />
Color<br />
Transparent<br />
Color<br />
Violet<br />
Color<br />
Silver<br />
Strength<br />
Type<br />
1.8 kg / 4.0 lbs<br />
Standard Cap<br />
Strength<br />
Type<br />
2.5 kg / 5.5 lbs<br />
Strong Cap<br />
Width<br />
Type<br />
Ø 5.6 mm<br />
Metal Housing<br />
Code<br />
Color<br />
Strength<br />
Type<br />
GP-LOC102<br />
Yellow<br />
0.6 kg / 1.3 lbs<br />
Extra-soft Cap<br />
Code<br />
Color<br />
Strength<br />
Type<br />
GP-LOC104<br />
Pink<br />
1.2 kg / 2.6 lbs<br />
Soft Cap<br />
Code<br />
Color<br />
Width<br />
Type<br />
GP-LOCDISK<br />
Pink<br />
Ø 14.0 mm<br />
Protective Disk<br />
TOOL & ANALOG<br />
GP-LOCTOOL<br />
Locator Universal Insertion &<br />
Extraction tool<br />
Analog for locators<br />
Ø mm<br />
Ø 3.75 mm<br />
GP-LOCAN<br />
Abutment Height<br />
10.0 mm<br />
Page 41 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
LOW-PROFILE<br />
LOCK ABUTMENTS<br />
LOCK-ABUTMENTS were designed for use with overdentures or partial dentures retained<br />
in whole or in part by dental implants in the mandible or maxilla. Low-Lock attachment<br />
featuring the lowest vertical profile. This new compact design with an internal thread will<br />
ensure multiple solutions for the most complex treatment plans including those which<br />
demonstrate divergent implants.<br />
The low-lock innovative design offers the best aesthetic results and is the smallest<br />
attachment available in the market today.<br />
The high degree of elastic quality designed into each retentive female cap allows for a greater<br />
contact zone interface between the cap lining and male component. Each cap assures superior<br />
stability and long-term functionality. Low-Lock retention caps are available in a variety of colorcoded<br />
retention levels. The Low-Lock profile gives optimum insertion and controlled distribution<br />
of the masticatory forces on tissue preventing overstress on the implant abutments, in both<br />
cases parallelism between the implants or in cases where the divergence may reach 30 degrees.<br />
Due to the tolerance of the Low-Lock design, together with the elasticity of the retentive cap<br />
in excess of these divergence degrees, the optimal solution is the castable Low-Lock when U<br />
is connected to the UCL and the implant system allows the technician to correct any kind of<br />
divergence achieving the desired directio<br />
Page 42 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
STRAIGHT LOW PROFILE LOCK ABUTMENT<br />
RP<br />
GP-LLP50<br />
GP-LLP01<br />
GP-LLP02<br />
GP-LLP03<br />
GP-LLP04<br />
GP-LLP05<br />
GP-LLP06<br />
Height<br />
0.5 mm<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
6.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
Ø 4.2 mm<br />
ANGULATED LOW PROFILE LOCK ABUTMENT<br />
* Screw included<br />
18°<br />
RP<br />
GP-LLP1801<br />
GP-LLP1802<br />
GP-LLP1803<br />
GP-LLP1804<br />
Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 3.78 mm<br />
Ø 3.78 mm<br />
Ø 3.78 mm<br />
Ø 3.78 mm<br />
30°<br />
RP<br />
GP-LLP3001<br />
GP-LLP3002<br />
GP-LLP3003<br />
GP-LLP3004<br />
Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
GP-LPCTO<br />
Ø mm<br />
Ø 3.78 mm<br />
Ø 3.78 mm<br />
Ø 3.78 mm<br />
Ø 3.78 mm<br />
Premounted carrier<br />
INCLUDED<br />
GP-LPCTO<br />
Premounted carrier<br />
included<br />
Page 43 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
STRAIGHT LOW PROFILE LOCK ABUTMENT<br />
SET CODE<br />
HEIGHT<br />
GP-LLP50-SET<br />
0.5 mm<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
GP-LLP10-SET<br />
1.0 mm<br />
Locator<br />
Abutment<br />
+<br />
Transparent<br />
Silicon cap<br />
Violet<br />
Cap<br />
Pink<br />
Cap<br />
Yellow<br />
Cap<br />
Metal<br />
Cap<br />
Protective<br />
Disk<br />
GP-LLP20-SET<br />
2.0 mm<br />
GP-LLP30-SET<br />
3.0 mm<br />
GP-LLP40-SET<br />
4.0 mm<br />
GP-LLP50-SET<br />
5.0 mm<br />
GP-LPC101<br />
GP-LPC103<br />
GP-LPC101<br />
GP-LPC104<br />
GP-LPMT<br />
GP-LPDISK<br />
GP-LLP60-SET<br />
6.0 mm<br />
ANGULATED LOW PROFILE LOCK ABUTMENT 18 DEGREES<br />
SET CODE<br />
HEIGHT<br />
Locator<br />
Abutment<br />
18°<br />
x1<br />
+<br />
x1<br />
Transparent<br />
Silicon cap<br />
x1<br />
Violet<br />
Cap<br />
x1<br />
Pink<br />
Cap<br />
x1<br />
Yellow<br />
Cap<br />
x1<br />
Metal<br />
Cap<br />
x1<br />
Protective<br />
Disk<br />
GP-LLP1801-SET<br />
GP-LLP1802-SET<br />
1.0 mm<br />
2.0 mm<br />
GP-LLP1803-SET<br />
3.0 mm<br />
GP-LPC101<br />
GP-LPC103<br />
GP-LPC101<br />
GP-LPC104<br />
GP-LPMT<br />
GP-LPDISK<br />
GP-LLP1804-SET<br />
4.0 mm<br />
ANGULATED LOW PROFILE LOCK ABUTMENT 30 DEGREES<br />
SET CODE<br />
HEIGHT<br />
x1<br />
Locator<br />
Abutment<br />
30°<br />
+<br />
x1<br />
Transparent<br />
Silicon cap<br />
x1<br />
Violet<br />
Cap<br />
x1<br />
Pink<br />
Cap<br />
x1<br />
Yellow<br />
Cap<br />
x1<br />
Metal<br />
Cap<br />
x1<br />
Protective<br />
Disk<br />
GP-LLP3001-SET<br />
GP-LLP3002-SET<br />
1.0 mm<br />
2.0 mm<br />
GP-LLP3003-SET<br />
3.0 mm<br />
GP-LPC101<br />
GP-LPC103<br />
GP-LPC101<br />
GP-LPC104<br />
GP-LPMT<br />
GP-LPDISK<br />
GP-LLP3004-SET<br />
4.0 mm<br />
Page 44 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
RETENTIVE INSERTION CAPS<br />
CAPS FOR LOW LOCK ABUTMENTS<br />
Code<br />
Color<br />
Size<br />
Strength<br />
Type<br />
GP-LPC101<br />
Transparent<br />
Normal Ø 2.5mm<br />
1.8 kg / 4.5 lbs<br />
Standard Cap<br />
Code<br />
Color<br />
Size<br />
Strength<br />
Type<br />
GP-LPC103<br />
Violet<br />
Normal Ø 2.5mm<br />
2.5 kg / 5.5 lbs<br />
Strong Cap<br />
Code<br />
Color<br />
Size<br />
Strength<br />
Type<br />
GP-LPMT<br />
Silver<br />
Ø 4.5 mm<br />
1.3kg<br />
Metal Housing<br />
Code<br />
GP-LPC102<br />
Code<br />
GP-LPC104<br />
Code<br />
GP-LPDISK<br />
Color<br />
Pink<br />
Color<br />
Yellow<br />
Color<br />
White<br />
Size<br />
Normal Ø 2.5mm<br />
Size<br />
Normal Ø 2.5mm<br />
Size<br />
Ø 14.0 mm<br />
Strength<br />
1.2 kg / 2.6 lbs<br />
Strength<br />
1.2 kg / 2.6 lbs<br />
Type<br />
Protective Disk<br />
Type<br />
Soft Cap<br />
Type<br />
Extra - Soft Cap<br />
PROSTHETICS<br />
Analog for Low Lock Abutment<br />
GP-LOCAN<br />
Ø mm Ø 4.4 mm<br />
Abutment Height 14.0 mm<br />
Impression Coping Transfer for Low Lock Abutment<br />
GP-LOCTR<br />
Page 45 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
MULTI UNITS<br />
ABUTMENTS<br />
Where angulation correction is required, the Multi Unit angled abutments<br />
provide an advanced solution for restoration on multiple implants.<br />
• Two different angles with three different cuff heights.<br />
• Designed to maintain the soft tissues' health.<br />
• One-piece design makes the restoration easy and simple.<br />
• Can be used for various clinical procedures: in the maxilla and mandible<br />
areas, partial or full edentulous jaw.<br />
• Provides long term stability.<br />
Angled multi-unit abutments<br />
available in a variety of sizes and<br />
angles for difficult to restore cases<br />
Sculpted design<br />
provides optimal soft tissue<br />
contouring with a wide variety of<br />
collar heights<br />
Low profile<br />
abutment emergence profiles seat<br />
easily in shallow or deep tissue<br />
without the need for additional<br />
remodeling<br />
Retained abutment screw<br />
for one-handed delivery of angled<br />
abutments 1.25mm Hex Driver<br />
The 18° multi-unit abutment allows an<br />
insertion path of up to 64° divergence.<br />
The 30° multi-unit abutment allows an<br />
insertion path of up to 90° divergence.<br />
Torque Chart<br />
Multi Unit Abutment on SSI Implant (final restoration)<br />
Transfers on Implant<br />
Healing Abutment on Implant<br />
Titanium Temporary abutment on SSI Implant<br />
Plastic SLeeves on SSI Implant<br />
35 Ncm<br />
20 Ncm<br />
20 Ncm<br />
20 Ncm<br />
10 Ncm<br />
Page 46 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
PROSTHETIC OPTIONS FOR MULTI UNIT ABUTMENTS<br />
NEW<br />
0°<br />
17° 30° 45°<br />
Available Heights<br />
1.0mm<br />
2.0mm<br />
3.0mm<br />
4.0mm<br />
Available Heights<br />
1.0mm<br />
2.0mm<br />
3.0mm<br />
Available Heights<br />
1.0mm<br />
2.0mm<br />
3.0mm<br />
Available Heights<br />
1.0mm<br />
Titanium Sleeve<br />
GP-TMSU<br />
Plastic Sleeve<br />
GP-PSMU<br />
Ti Base<br />
GP-MUCAD<br />
Scan Post<br />
GP-MUSCAN<br />
Open Transfer<br />
GP-TMU<br />
Short Screw<br />
GP-SSC<br />
Long Screw<br />
GP-LSC<br />
Analog<br />
GP-AMU<br />
Fixation Screw<br />
GP-FSMUL<br />
Healing Cap<br />
GP-HMU<br />
Premount Included<br />
With Angulated<br />
Abutments<br />
GP-MUCA<br />
Page 47 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
STRAIGHT SINGLE MULTI UNIT ABUTMENT<br />
* Screw included<br />
NEW<br />
RP<br />
GP-MU01<br />
GP-MU02<br />
GP-MU03<br />
GP-MU04<br />
Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
MINI SET<br />
Multi Unit Abutment Titanium Sleeve Fixation Screw Set Code Abutment Height<br />
GP-MUA01-MINSET<br />
1.0 mm<br />
GP-MUA02-MINSET<br />
2.0 mm<br />
GP-MUA03-MINSET<br />
3.0 mm<br />
GP-MUA04-MINSET<br />
4.0 mm<br />
FULL SET<br />
Multi Unit<br />
Abutment<br />
Plastic<br />
Sleeve<br />
Titanium<br />
Sleeve<br />
Analog<br />
Transfer<br />
Long /<br />
Short<br />
Transfer<br />
Screw<br />
Healing<br />
Cap<br />
Fixation<br />
Screw<br />
Set Code<br />
Abutment Height<br />
GP-MUA01-FULSET<br />
1.0 mm<br />
GP-MUA02-FULSET<br />
2.0 mm<br />
GP-MUA03-FULSET<br />
3.0 mm<br />
GP-MUA04-FULSET<br />
4.0 mm<br />
Page 48 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
17° DEGREES MULTI UNIT ABUTMENT<br />
NEW<br />
17°<br />
INCLUDED<br />
RP<br />
GP-MU171<br />
GP-MU172<br />
GP-MU173<br />
Degrees<br />
17°<br />
17°<br />
17°<br />
Height<br />
Ncm<br />
Ø mm<br />
1.0 mm<br />
35 Ncm<br />
Ø 4.5 mm<br />
2.0 mm<br />
35 Ncm<br />
Ø 4.5 mm<br />
3.0 mm<br />
35 Ncm<br />
Ø 4.5 mm<br />
GP-MUCA<br />
Premounted carrier<br />
included<br />
MINI SET<br />
Multi Unit Abutment Titanium Sleeve Fixation Screw Set Code Abutment Height<br />
17°<br />
GP-MU171-MINSET<br />
1.0 mm<br />
17°<br />
GP-MU172-MINSET<br />
2.0 mm<br />
17°<br />
GP-MU173-MINSET<br />
3.0 mm<br />
FULL SET<br />
Multi Unit<br />
Abutment<br />
Plastic<br />
Sleeve<br />
Titanium<br />
Sleeve<br />
Analog<br />
Transfer<br />
Long /<br />
Short<br />
Transfer<br />
Screw<br />
Healing<br />
Cap<br />
Fixation<br />
Screw<br />
Set Code<br />
Abutment Height<br />
17°<br />
GP-MU171-FULSET<br />
1.0 mm<br />
17°<br />
GP-MU172-FULSET<br />
2.0 mm<br />
17°<br />
GP-MU173-FULSET<br />
3.0 mm<br />
Page 49 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
17° DEGREES MULTI UNIT ABUTMENT<br />
NEW<br />
30°<br />
INCLUDED<br />
RP<br />
GP-MU301<br />
GP-MU302<br />
GP-MU303<br />
Degrees<br />
30°<br />
30°<br />
30°<br />
Height<br />
Ncm<br />
Ø mm<br />
1.0 mm<br />
35 Ncm<br />
Ø 4.5 mm<br />
2.0 mm<br />
35 Ncm<br />
Ø 4.5 mm<br />
3.0 mm<br />
35 Ncm<br />
Ø 4.5 mm<br />
GP-MUCA<br />
Premounted carrier<br />
included<br />
MINI SET<br />
Multi Unit Abutment Titanium Sleeve Fixation Screw Set Code Abutment Height<br />
30°<br />
GP-MU301-MINSET<br />
1.0 mm<br />
30°<br />
GP-MU302-MINSET<br />
2.0 mm<br />
30°<br />
GP-MU303-MINSET<br />
3.0 mm<br />
FULL SET<br />
Multi Unit<br />
Abutment<br />
Plastic<br />
Sleeve<br />
Titanium<br />
Sleeve<br />
Analog<br />
Transfer<br />
Long /<br />
Short<br />
Transfer<br />
Screw<br />
Healing<br />
Cap<br />
Fixation<br />
Screw<br />
Set Code<br />
Abutment Height<br />
30°<br />
GP-MU301-FULSET<br />
1.0 mm<br />
30°<br />
GP-MU302-FULSET<br />
2.0 mm<br />
30°<br />
GP-MU303-FULSET<br />
3.0 mm<br />
Page 50 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
17° DEGREES MULTI UNIT ABUTMENT<br />
NEW<br />
45°<br />
RP<br />
Degrees<br />
Height<br />
Ncm<br />
Ø mm<br />
GP-MU451<br />
45°<br />
1.0 mm<br />
35 Ncm<br />
Ø 4.5 mm<br />
INCLUDED<br />
GP-MUCA<br />
Premounted carrier<br />
included<br />
MINI SET<br />
Multi Unit Abutment Titanium Sleeve Fixation Screw Set Code Abutment Height<br />
45°<br />
GP-MU451-MINSET<br />
1.0 mm<br />
FULL SET<br />
Multi Unit<br />
Abutment<br />
Plastic<br />
Sleeve<br />
Titanium<br />
Sleeve<br />
Analog<br />
Transfer<br />
Long /<br />
Short<br />
Transfer<br />
Screw<br />
Healing Cap<br />
Fixation<br />
Screw<br />
Set Code<br />
Abutment Height<br />
45°<br />
GP-MU451-FULSET<br />
1.0 mm<br />
Page 51 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
FULL ACCESSORIES INFORMATION TABLE<br />
NEW<br />
Product<br />
Titanium Sleeve<br />
Product<br />
Plastic Sleeve<br />
Code<br />
GP-TMSU<br />
Code<br />
GP-PMSU<br />
Full Length<br />
Height<br />
Ø mm<br />
12.0 mm<br />
9.0 mm<br />
Ø 5.0 mm<br />
Full Length<br />
Height<br />
Ø mm<br />
12.0 mm<br />
9.0 mm<br />
Ø 5.0 mm<br />
Product<br />
Analog<br />
Product<br />
Healing Cap<br />
Code<br />
GP-AMU<br />
Code<br />
GP-HMU<br />
Full Length<br />
Height<br />
Ø mm<br />
13.5 mm<br />
8.5 mm<br />
Ø 5.0 mm<br />
Full Length<br />
Height<br />
Ø mm<br />
5.0 mm<br />
5.0 mm<br />
Ø 5.0 mm<br />
Product Open Transfer Long Transfer Screw Short Transfer Screw<br />
Code GP-TMU GP-LSC GP-SSC<br />
Full Length 11.5 mm 14.0 mm 11.0 mm<br />
Height 9.0 mm 12.0 mm 9.0 mm<br />
Ø mm Ø 5.0 mm Ø 2.0 mm Ø 2.0 mm<br />
Product<br />
Fixation Screw<br />
Product<br />
Long Fixation Screw<br />
Code<br />
GP-FSMUL<br />
Code<br />
GP-LFSMUL<br />
Full Length<br />
Height<br />
Ø mm<br />
5.0 mm<br />
2.5 mm<br />
Ø 1.72 mm<br />
Full Length<br />
Height<br />
Ø mm<br />
6.7 mm<br />
5.1 mm<br />
Ø 1.72 mm<br />
Product<br />
Scan Post<br />
Product<br />
Ti Base<br />
Code<br />
GP-MUSCAN<br />
Code<br />
GP-MUCAD<br />
Full Length<br />
Height<br />
Ø mm<br />
6.0 mm<br />
6.0 mm<br />
Ø 5.0 mm<br />
Full Length<br />
Height<br />
Ø mm<br />
5.0 mm<br />
4.5 mm<br />
Ø 4.9 mm<br />
Digital Library is available<br />
sales@gp-implant.com<br />
Page 52 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
CAD-CAM<br />
ABUTMENTS<br />
CAD/CAM technology allows creating three-dimensional models and their materialisation<br />
by numerical controlled machines to operate more efficiently, reduce costs, increase user/<br />
patient satisfaction, and ultimately achieve profits. CAD/CAM tech is the answer to the<br />
constantly rising demand for esthetic and naturally-looking restorations, enhanced comfort<br />
during procedures, reduced costs, and minimum time spent at the dental office.<br />
CAD-CAM ABUTMENTS<br />
* Screw included<br />
RP<br />
GP-THEA05<br />
GP-THEA10<br />
GP-THEA20<br />
GP-THEA30<br />
GP-THEA40<br />
Height<br />
0.5 mm<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
RP<br />
GP-TROA05<br />
GP-TROA10<br />
GP-TROA20<br />
GP-TROA30<br />
GP-TROA40<br />
Height<br />
0.5 mm<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 4.6 mm<br />
Ø 4.6 mm<br />
Ø 4.6 mm<br />
Ø 4.6 mm<br />
Ø 4.6 mm<br />
Page 53 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
Internal Hex - Regular Platform 3.75mm<br />
APPROVED<br />
CAD-CAM FOR MULTI UNIT<br />
ACHIEVE PRECISE, LONG<br />
LASTING RESULTS<br />
CAD/CAM technology allows creating three-dimensional<br />
RP GP-MUCAD<br />
Type 2.0 mm<br />
Ncm 15 Ncm<br />
Ø mm Ø 4.6 mm<br />
CAD-CAM SCAN POST - PEEK<br />
* Screw included<br />
models and their materialization by numerical<br />
controlled machines to operate more efficiently,<br />
reduce costs, increase user/patient satisfaction, and<br />
ultimately achieve profits. CAD/CAM tech is the answer<br />
to the constantly rising demand for esthetic and<br />
naturallylooking restorations, enhanced comfort during<br />
procedures, reduced costs, and minimum time spent at<br />
the dental office<br />
RP<br />
Type<br />
Material<br />
GP-SPCAD<br />
Post Scan<br />
PEEK<br />
DOWNLOAD<br />
DIGITAL LIBRARIES<br />
DOWNLOAD<br />
The above button will redirect you to our download<br />
section. There you will find the Digital Libraries.<br />
Page 54 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
INTERNAL<br />
HEX - NARROW<br />
Page 55 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
NP<br />
NARROW<br />
SHAPE<br />
IMPLANT<br />
11<br />
YEARS<br />
Page 56 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
NP<br />
Internal Hex - Narrow Platform 2.0mm<br />
PENDING<br />
NARROW SHAPE IMPLANT<br />
NSI, the narrow implant, is used for installation in cases of narrow crest<br />
or between closely situated teeth and permanent implants for temporary<br />
restoration. It may be used for immediate loading.<br />
This implant is chosen by dentists that are looking for excellent esthetics,<br />
especially in challenging situations.<br />
Lab tests and studies have demonstrated the high breaking strength and it's<br />
stability. It is suitable for all surgical procedures and excellent in all bone types.<br />
The NSI implant has a triple thread body for an easy and fast insertion, better<br />
control during placement, and a high primary stability.<br />
*Cover screw is included<br />
IMPLANT CHARACTERISTICS<br />
3.0 mmD<br />
• A 3.0 mm implant for narrow<br />
spaces with no bone augmentation<br />
• Ideal for the aesthetic zone<br />
• Thread design offers high<br />
initial stability, optimalprosthetic<br />
orientation, and minimally invasive<br />
insertion<br />
• Generously dimensioned<br />
main body threading provides<br />
larger surface area and better<br />
bone engagement despite the<br />
slenderness of the implant.<br />
Design Features:<br />
• Micro threads<br />
• Split coronal macro thread<br />
Advantages:<br />
• High bone volume around the<br />
neck<br />
• Greater surface area<br />
• Excellent stress distribution<br />
• Excellent BIC (bone to implant<br />
contact) in coronal part<br />
• Less crestal resorption<br />
• Long term esthetic results<br />
• Extremely narrow apical part<br />
2.0mm<br />
Page 57 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
NP<br />
Internal Hex - Narrow Platform 2.0mm<br />
PENDING<br />
HAND DRIVER KEY<br />
FOR INTERNAL HEX NP<br />
*Code<br />
GP-TIT17<br />
Ø 2.00mm<br />
Hex 2.00<br />
NP<br />
Length<br />
Diameter<br />
Ø 3.0<br />
10.0mm L<br />
NS3010<br />
11.5mm L<br />
NS3011<br />
13.0mm L<br />
NS3013<br />
16.0mm L<br />
NS3016<br />
Page 58 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
NP<br />
Internal Hex - Narrow Platform 2.0mm<br />
PENDING<br />
DRILLING PROTOCOL<br />
Hex 2.00<br />
NP<br />
3.0<br />
L<br />
Drill sequence by bone type - An additional 1 mm must<br />
be added to the length of the drill to account for the angled<br />
cutting tip.<br />
D-I, D-II Dense bone considerations - Countersink<br />
should be used if the standard dense bone protocol is not<br />
sufficient to fully seat the implant without exceeding the<br />
recommended maximum insertion torque of max. 60Ncm<br />
for implant Ø3.75mm and above. Do not exceed max.<br />
45Ncm for implants diameter lower than 3.75mm.<br />
NP3010<br />
L 10.0mm<br />
NP3011<br />
L 11.5mm<br />
NP3013<br />
L 13.0mm<br />
NP3016<br />
L 16.0mm<br />
Drilling<br />
Speed (RPM)<br />
Diameter<br />
1200-<br />
1500<br />
Soft Bone / Dense Bone<br />
900-<br />
1,200<br />
700-<br />
900<br />
Ø 1.9 Ø 2.0 Ø 2.8<br />
Important:<br />
In cases of extremely hard<br />
bone, it is recommended<br />
to drill with ø 3.0 mm drill only<br />
through the cortical layer<br />
Optional<br />
*The procedure recommended by GP Implant LTD cannot replace the judgment and the experience of the surgeon.<br />
Page 59 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
NP<br />
Internal Hex - Narrow Platform 2.0mm<br />
PENDING<br />
TITANIUM STRAIGHT ABUTMENTS<br />
* Screw included<br />
NP<br />
Abutment Height<br />
Ncm<br />
Ø mm<br />
GP-TTA09<br />
9.0 mm<br />
25 Ncm<br />
Ø 3.0 mm<br />
GP-TTA11<br />
11.0 mm<br />
25 Ncm<br />
Ø 3.0 mm<br />
TITANIUM STRAIGHT ABUTMENTS WITH COLLAR<br />
* Screw included<br />
NP<br />
GP-TTS01<br />
GP-TTS02<br />
GP-TTS03<br />
Abutment Height<br />
7.5 mm<br />
8.5 mm<br />
9.5 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
TITANIUM ANGULATED ABUTMENT 15 DEGREES<br />
* Screw included<br />
15°<br />
NP<br />
Abutment Height<br />
Ncm<br />
Ø mm<br />
GP-AB15N<br />
9.0 mm<br />
25 Ncm<br />
Ø 3.8 mm<br />
TRANSFER - IMPRESSION COPING<br />
* Screw included<br />
NP<br />
Height<br />
Ncm<br />
Ø mm<br />
GP-TTN12<br />
13.0 mm<br />
25 Ncm<br />
Ø 3.8 mm<br />
Page 60 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
NP<br />
Internal Hex - Narrow Platform 2.0mm<br />
PENDING<br />
LAB ANALOG<br />
NP<br />
Height<br />
Ø mm<br />
GP-NAN<br />
12.0 mm<br />
Ø 4.6 mm<br />
HEALING ABUTMENT<br />
NP<br />
GP-THC02<br />
GP-THC03<br />
GP-THC04<br />
GP-THC05<br />
Height<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 3.5 mm<br />
Ø 3.5 mm<br />
Ø 3.5 mm<br />
Ø 3.5 mm<br />
BALL ATTACHMENT ABUTMENT<br />
NP<br />
GP-TBA01<br />
GP-TBA02<br />
GP-TBA03<br />
Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 3.35 mm<br />
Ø 3.35 mm<br />
Ø 3.35 mm<br />
BALL ATTACHMENT SET<br />
x1<br />
Ball Attachment<br />
Abutment<br />
x1<br />
Transparent<br />
Silicon cap<br />
x1<br />
Black<br />
Cap<br />
x1<br />
Pink<br />
Cap<br />
x1<br />
Yellow<br />
Cap<br />
x1<br />
Metal<br />
Cap<br />
x1<br />
Protective<br />
Disk<br />
SET CODE<br />
HEIGHT<br />
+<br />
GP-TBA01SET<br />
1.0 mm<br />
GP-TBA02SET<br />
2.0 mm<br />
GP-B2506<br />
GP-B2507<br />
GP-B2505<br />
GP-B2504<br />
GP-BAMH<br />
GP-BDISK<br />
GP-TBA03SET<br />
3.0 mm<br />
Page 61 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
NP<br />
Internal Hex - Narrow Platform 2.0mm<br />
PENDING<br />
CASTABLE ABUTMENT<br />
* Screw included<br />
NP<br />
Height<br />
Ncm<br />
Ø mm<br />
GP-TPH<br />
9.5 mm<br />
15 Ncm<br />
Ø 3.5 mm<br />
STRAIGHT ZIRCONIA ABUTMENT<br />
* Screw included<br />
NP<br />
Abutment Height<br />
Collar Height<br />
Ncm<br />
Ø mm<br />
GP-NZS01<br />
10.0 mm<br />
1.5 mm<br />
15 Ncm<br />
Ø 3.8 mm<br />
ANGULATED ZIRCONIA ABUTMENT 15 DEGREES<br />
* Screw included<br />
15°<br />
NP<br />
Abutment Height<br />
Collar Height<br />
Ncm<br />
Ø mm<br />
GP-NAZ1501<br />
10.0 mm<br />
1.5 mm<br />
15 Ncm<br />
Ø 4.8 mm<br />
Page 62 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
NP<br />
Internal Hex - Narrow Platform 2.0mm<br />
PENDING<br />
Hex 2.00<br />
MULTI UNIT<br />
SYSTEM - NP<br />
NP<br />
STRAIGHT MULTI UNIT ABUTMENT<br />
* Screw included<br />
NP<br />
GP-NMU01<br />
GP-NMU02<br />
GP-NMU03<br />
GP-NMU04<br />
Abutment Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
FULL SET<br />
Multi Unit<br />
Abutment<br />
Plastic<br />
Sleeve<br />
Titanium<br />
Sleeve<br />
Analog<br />
Transfer<br />
Long /<br />
Short<br />
Transfer<br />
Screw<br />
Healing<br />
Cap<br />
Fixation<br />
Screw<br />
Closed<br />
Transfer<br />
Set Code<br />
Abutment<br />
Height<br />
GP-NMU01-SET<br />
1.0 mm<br />
GP-NMU1702-SET<br />
2.0 mm<br />
GP-NMU03-SET<br />
3.0 mm<br />
GP-NMU04-SET<br />
4.0 mm<br />
Page 63 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
NP<br />
Internal Hex - Narrow Platform 2.0mm<br />
ANGULATED MULTI UNIT 17 DEGREES<br />
PENDING<br />
17°<br />
NP<br />
Height<br />
Ncm<br />
Ø mm<br />
GP-NMU1701<br />
1.0 mm<br />
30 Ncm<br />
Ø 4.5 mm<br />
GP-NMU1702<br />
2.0 mm<br />
30 Ncm<br />
Ø 4.5 mm<br />
FULL SET<br />
Multi Unit<br />
Abutment<br />
Plastic<br />
Sleeve<br />
Titanium<br />
Sleeve<br />
Analog<br />
Transfer<br />
Long /<br />
Short<br />
Transfer<br />
Screw<br />
Healing<br />
Cap<br />
Fixation<br />
Screw<br />
Closed<br />
Transfer<br />
Set Code<br />
Abutment<br />
Height<br />
17°<br />
GP-NMU1701-SET<br />
1.0 mm<br />
17°<br />
GP-NMU1702-SET<br />
2.0 mm<br />
ANGULATED MULTI UNIT 30 DEGREES<br />
30°<br />
NP<br />
Height<br />
Ncm<br />
Ø mm<br />
GP-NMU3001<br />
1.0 mm<br />
30 Ncm<br />
Ø 4.5 mm<br />
GP-NMU3002<br />
2.0 mm<br />
30 Ncm<br />
Ø 4.5 mm<br />
FULL SET<br />
Multi Unit<br />
Abutment<br />
Plastic<br />
Sleeve<br />
Titanium<br />
Sleeve<br />
Analog<br />
Transfer<br />
Long /<br />
Short<br />
Transfer<br />
Screw<br />
Healing<br />
Cap<br />
Fixation<br />
Screw<br />
Closed<br />
Transfer<br />
Set Code<br />
Abutment<br />
Height<br />
30°<br />
GP-NMU3001-SET<br />
1.0 mm<br />
30°<br />
GP-NMU3002-SET<br />
2.0 mm<br />
Page 64 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
NP<br />
Internal Hex - Narrow Platform 2.0mm<br />
PENDING<br />
FULL ACCESSORIES INFORMATION TABLE<br />
NEW<br />
Product<br />
Titanium Sleeve<br />
Product<br />
Plastic Sleeve<br />
Code<br />
GP-NTMSU<br />
Code<br />
GP-NPMSU<br />
Full Length<br />
Height<br />
Ø mm<br />
12.0 mm<br />
9.0 mm<br />
Ø 5.0 mm<br />
Full Length<br />
Height<br />
Ø mm<br />
12.0 mm<br />
9.0 mm<br />
Ø 5.0 mm<br />
Product<br />
Analog<br />
Product<br />
Healing Cap<br />
Code<br />
GP-NAMU<br />
Code<br />
GP-NHMU<br />
Full Length<br />
Height<br />
Ø mm<br />
13.5 mm<br />
8.5 mm<br />
Ø 5.0 mm<br />
Full Length<br />
Height<br />
Ø mm<br />
5.0 mm<br />
5.0 mm<br />
Ø 5.0 mm<br />
Product Open Transfer Long Transfer Screw<br />
Code GP-NTMU GP-NLSC<br />
Full Length 11.5 mm 14.0 mm<br />
Height 9.0 mm 12.0 mm<br />
Ø mm Ø 5.0 mm Ø 2.0 mm<br />
Product<br />
Fixation Screw<br />
Code<br />
GP-NFSMUL<br />
Full Length<br />
Height<br />
Ø mm<br />
5.0 mm<br />
2.5 mm<br />
Ø 1.72 mm<br />
Product<br />
Scan Post<br />
Product<br />
Ti Base<br />
Code<br />
GP-NMUSCAN<br />
Code<br />
GP-NMUCAD<br />
Full Length<br />
Height<br />
Ø mm<br />
6.0 mm<br />
6.0 mm<br />
Ø 5.0 mm<br />
Full Length<br />
Height<br />
Ø mm<br />
5.0 mm<br />
4.5 mm<br />
Ø 4.9 mm<br />
Digital Library is available<br />
sales@gp-implant.com<br />
Page 65 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
CONICAL<br />
CONNECTION<br />
Page 66 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
RP<br />
NP<br />
NOBEL<br />
ACTIVE<br />
COMPATIBLE<br />
Page 67 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
CONICAL CONNECTION IMPLANT SYSTEM<br />
IMPLANT<br />
CHARACTERISTICS<br />
Improved soft tissue<br />
support<br />
Sealed Internal<br />
Connical Hex<br />
Connetion<br />
Platform Switching<br />
for better soft tissue<br />
interface<br />
Double Thread<br />
design for faster<br />
osseointegration<br />
Apical drilling blades for<br />
optimal final implant<br />
placement during<br />
manual insertion<br />
High initial<br />
stability even in<br />
compromised<br />
bone situations<br />
Page 68 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
Ø3.50 mmD<br />
Hex 2.26<br />
Diameter<br />
NARROW PLATFORM<br />
NP<br />
Length<br />
8.0mm L<br />
10.0mm L<br />
Ø 3.5<br />
CC3508<br />
CC3510<br />
11.5mm L<br />
CC3511<br />
13.0mm L<br />
CC3513<br />
16.0mm L<br />
CC3516<br />
NEW<br />
Ø4.20, Ø5.00 mmD<br />
Hex 2.67<br />
Diameter<br />
REGULAR PLATFORM<br />
RP<br />
Length<br />
Ø 4.2 Ø 5.0<br />
6.0mm L CC5006<br />
NEW<br />
8.0mm L CC4208 CC5008<br />
10.0mm L CC4210 CC5010<br />
11.5mm L CC4211 CC5011<br />
13.0mm L CC4213 CC5013<br />
16.0mm L CC4216 NEW CC5016<br />
NEW<br />
Page 69 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
CONICAL<br />
Conical<br />
CONNECTION<br />
Connection -<br />
IMPLANT<br />
NP 3.5 | RP<br />
SYSTEM<br />
4.2 | RP 5.0<br />
PENDING<br />
DRILLING PROTOCOL<br />
Hex 2.26<br />
3.50<br />
NP<br />
L<br />
Drill sequence by bone type - An additional 1 mm must<br />
be added to the length of the drill to account for the angled<br />
cutting tip.<br />
D-I, D-II Dense bone considerations - Countersink<br />
should be used if the standard dense bone protocol is not<br />
sufficient to fully seat the implant without exceeding the<br />
recommended maximum insertion torque of max. 60Ncm<br />
for implant Ø3.75mm and above. Do not exceed max.<br />
45Ncm for implants diameter lower than 3.75mm.<br />
CC3308<br />
L 8.0mm<br />
CC3310<br />
L 10.0mm<br />
CC3311<br />
L 11.5mm<br />
CC3313<br />
L 13.0mm<br />
CC3316<br />
L 16.0mm<br />
Drilling<br />
Speed (RPM)<br />
Diameter<br />
1200-<br />
1500<br />
Soft Bone<br />
900-<br />
1,200<br />
700-<br />
900<br />
Dense<br />
Bone<br />
500-<br />
700<br />
Ø 1.9 Ø 2.0 Ø 2.8 Ø 3.2<br />
Optional<br />
*The procedure recommended by GP Implant LTD cannot replace the judgment and the experience of the surgeon.<br />
Page 70 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
CONICAL CONNECTION IMPLANT SYSTEM<br />
PENDING<br />
DRILLING PROTOCOL<br />
Hex 2.67<br />
4.30<br />
RP<br />
L<br />
Drill sequence by bone type - An additional 1 mm must<br />
be added to the length of the drill to account for the angled<br />
cutting tip.<br />
D-I, D-II Dense bone considerations - Countersink<br />
should be used if the standard dense bone protocol is not<br />
sufficient to fully seat the implant without exceeding the<br />
recommended maximum insertion torque of max. 60Ncm<br />
for implant Ø3.75mm and above. Do not exceed max.<br />
45Ncm for implants diameter lower than 3.75mm.<br />
CC4308<br />
L 8.0mm<br />
CC4310<br />
L 10.0mm<br />
CC4311<br />
L 11.5mm<br />
CC4313<br />
L 13.0mm<br />
CC4316<br />
L 16.0mm<br />
Drilling<br />
Speed (RPM)<br />
Diameter<br />
1200-<br />
1500<br />
900-<br />
1,200<br />
Soft Bone<br />
700-<br />
900<br />
500-<br />
700<br />
300-<br />
500<br />
Dense<br />
Bone<br />
200-<br />
400<br />
Ø 1.9 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 3.5-4.2<br />
Optional<br />
*The procedure recommended by GP Implant LTD cannot replace the judgment and the experience of the surgeon.<br />
Page 71 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
DRILLING PROTOCOL<br />
Hex 2.67<br />
5.0<br />
RP<br />
L<br />
Drill sequence by bone type - An additional 1 mm must<br />
be added to the length of the drill to account for the angled<br />
cutting tip.<br />
D-I, D-II Dense bone considerations - Countersink<br />
should be used if the standard dense bone protocol is not<br />
sufficient to fully seat the implant without exceeding the<br />
recommended maximum insertion torque of max. 60Ncm<br />
for implant Ø3.75mm and above. Do not exceed max.<br />
45Ncm for implants diameter lower than 3.75mm.<br />
CC5008<br />
L 8.0mm<br />
CC5008<br />
L 8.0mm<br />
CC5010<br />
L 10.0mm<br />
CC5011<br />
L 11.5mm<br />
CC5013<br />
L 13.0mm<br />
CC5016<br />
L 16.0mm<br />
Drilling<br />
Speed (RPM)<br />
Diameter<br />
1200-<br />
1500<br />
900-<br />
1,200<br />
Soft Bone<br />
700-<br />
900<br />
500-<br />
700<br />
300-<br />
500<br />
Dense<br />
Bone<br />
200-<br />
400<br />
Ø 1.9 Ø 2.0 Ø 2.8 Ø 3.2 Ø 3.65 Ø 4.3<br />
Optional<br />
*The procedure recommended by GP Implant LTD cannot replace the judgment and the experience of the surgeon.<br />
Page 72 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
TRANSFERS<br />
& SNAP ON<br />
IMPRESSION COPINGS - TRANSFERS<br />
NP<br />
GP-CCT14-NP<br />
GP-CCT22-NP<br />
GP-CLT9-NP<br />
GP-CLT15-NP<br />
Type<br />
Closed Tray<br />
Opened Tray<br />
Click<br />
Click<br />
Ø mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Height<br />
14 mm<br />
22 mm<br />
9 mm<br />
15 mm<br />
RP<br />
GP-CCT14-RP<br />
GP-CCT22-RP<br />
GP-CLT9-RP<br />
GP-CLT15-RP<br />
Type<br />
Closed Tray<br />
Opened Tray<br />
Click<br />
Click<br />
Ø mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Height<br />
14 mm<br />
22 mm<br />
9 mm<br />
15 mm<br />
Page 73 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
ANATOMIC SNAP-ON TRANSFER - STRAIGHT<br />
PENDING<br />
* Screw included<br />
NP<br />
GP-SOT10-NP<br />
GP-SOT11-NP<br />
GP-SOT13-NP<br />
Type<br />
Closed Tray<br />
Opened Tray<br />
Click<br />
Collar Height<br />
1.5 mm<br />
3.0 mm<br />
4.5 mm<br />
Abutment Height<br />
10.0 mm<br />
11.5 mm<br />
13.0 mm<br />
RP<br />
GP-SOT10-RP<br />
GP-SOT11-RP<br />
GP-SOT13-RP<br />
Type<br />
Closed Tray<br />
Opened Tray<br />
Click<br />
Collar Height<br />
1.5 mm<br />
3.0 mm<br />
4.5 mm<br />
Abutment Height<br />
10.0 mm<br />
11.5 mm<br />
13.0 mm<br />
ANATOMIC SNAP-ON TRANSFER - ANGULATED<br />
* Screw included<br />
15° 25°<br />
NP<br />
GP-SOT1510-NP<br />
GP-SOT1512-NP<br />
GP-SOT2510-NP<br />
GP-SOT2512-NP<br />
Type<br />
15 Degrees<br />
15 Degrees<br />
25 Degrees<br />
25 Degrees<br />
Collar Height<br />
1.5 mm<br />
3.0 mm<br />
1.5 mm<br />
3.0 mm<br />
Abutment Height<br />
10.0 mm<br />
12.0 mm<br />
10.0 mm<br />
12.0 mm<br />
15° 25°<br />
RP<br />
GP-SOT1510-RP<br />
GP-SOT1512-RP<br />
GP-SOT2510-RP<br />
GP-SOT2512-RP<br />
Type<br />
15 Degrees<br />
15 Degrees<br />
25 Degrees<br />
25 Degrees<br />
Collar Height<br />
1.5 mm<br />
3.0 mm<br />
1.5 mm<br />
3.0 mm<br />
Abutment Height<br />
10.0 mm<br />
12.0 mm<br />
10.0 mm<br />
12.0 mm<br />
Page 74 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
LAB<br />
ANALOG<br />
LAB ANALOG<br />
NP<br />
Ø mm<br />
Height<br />
GP-CCAN10-NP<br />
Ø 3.5 mm<br />
10.0 mm<br />
RP<br />
Ø mm<br />
Height<br />
GP-CCAN10-RP<br />
Ø 3.9 mm<br />
10.0 mm<br />
Page 75 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
HEALING<br />
ABUTMENTS<br />
HEALING ABUTMENT<br />
NP<br />
GP-CCH02-NP<br />
GP-CCH03-NP<br />
GP-CCH04-NP<br />
GP-CCH05-NP<br />
Height<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
RP<br />
GP-CCH02-RP<br />
GP-CCH03-RP<br />
GP-CCH04-RP<br />
GP-CCH05-RP<br />
Height<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ø mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Ø 4.5 mm<br />
Page 76 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
TITANIUM<br />
ABUTMENTS<br />
STRAIGHT ABUTMENTS<br />
* Screw included<br />
NP<br />
GP-CSTA09-NP<br />
GP-CSTA13-NP<br />
RP<br />
GP-CSTA09-RP<br />
GP-CSTA13-RP<br />
Height<br />
9.0 mm<br />
13.0 mm<br />
Height<br />
9.0 mm<br />
13.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 3.6 mm<br />
Ø 3.6 mm<br />
Ø mm<br />
Ø 4.0 mm<br />
Ø 4.0 mm<br />
STRAIGHT ABUTMENTS WITH COLLAR<br />
* Screw included<br />
NP<br />
GP-CSH01-NP<br />
GP-CSH02-NP<br />
GP-CSH03-NP<br />
RP<br />
GP-CSH01-RP<br />
GP-CSH02-RP<br />
GP-CSH03-RP<br />
Type<br />
With collar<br />
With collar<br />
With collar<br />
With collar<br />
With collar<br />
With collar<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
Abutment Height<br />
10.0 mm<br />
11.0 mm<br />
12.0 mm<br />
10.0 mm<br />
11.0 mm<br />
12.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Page 77 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
ANGULATED ABUTMENTS<br />
* Screw included<br />
15° 15°<br />
NP<br />
GP-CAB15-NP<br />
RP<br />
GP-CAB15-RP<br />
Height<br />
9.0 mm<br />
Height<br />
9.0 mm<br />
Ncm<br />
25 Ncm<br />
Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 3.8 mm<br />
Ø mm<br />
Ø 3.8 mm<br />
25° 25°<br />
NP<br />
GP-CAB25-NP<br />
RP<br />
GP-CAB25-RP<br />
Height<br />
9.0 mm<br />
Height<br />
9.0 mm<br />
Ncm<br />
25 Ncm<br />
Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 3.8 mm<br />
Ø mm<br />
Ø 3.8 mm<br />
ANGULATED ABUTMENTS WITH COLLAR<br />
15°<br />
15°<br />
NP<br />
GP-CS1501-NP<br />
GP-CS1502-NP<br />
GP-CS1503-NP<br />
RP<br />
GP-CS1501-RP<br />
GP-CS1502-RP<br />
GP-CS1503-RP<br />
Abutment Height<br />
10.0 mm<br />
11.5 mm<br />
13.0 mm<br />
10.0 mm<br />
11.5 mm<br />
13.0 mm<br />
Collar Height<br />
1.5 mm<br />
3.0 mm<br />
5.0 mm<br />
1.5 mm<br />
3.0 mm<br />
5.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
25°<br />
25°<br />
NP<br />
GP-CS2501-NP<br />
GP-CS2502-NP<br />
GP-CS2503-NP<br />
RP<br />
GP-CS2501-RP<br />
GP-CS2502-RP<br />
GP-CS2503-RP<br />
Abutment Height<br />
10.0 mm<br />
11.5 mm<br />
13.0 mm<br />
10.0 mm<br />
11.5 mm<br />
13.0 mm<br />
Collar Height<br />
1.5 mm<br />
3.0 mm<br />
5.0 mm<br />
1.5 mm<br />
3.0 mm<br />
5.0 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ø mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Ø 5.0 mm<br />
Page 78 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
PEEK<br />
ABUTMENTS<br />
STRAIGHT PEEK ABUTMENTS WITH COLLAR<br />
* Screw included<br />
NP<br />
GP-CPEK01-NP<br />
GP-CPEK02-NP<br />
GP-CPEK03-NP<br />
GP-CPEK04-NP<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Abutment Height<br />
10.5 mm<br />
11.5 mm<br />
12.5 mm<br />
13.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
RP<br />
GP-CPEK01-RP<br />
GP-CPEK02-RP<br />
GP-CPEK03-RP<br />
GP-CPEK04-RP<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Abutment Height<br />
10.5 mm<br />
11.5 mm<br />
12.5 mm<br />
13.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15° 15°<br />
NP<br />
GP-CPEK1501-NP<br />
GP-CPEK1502-NP<br />
GP-CPEK1503-NP<br />
RP<br />
GP-CPEK1501-RP<br />
GP-CPEK1502-RP<br />
GP-CPEK1503-RP<br />
Abutment Height<br />
9.0 mm<br />
10.0 mm<br />
13.0 mm<br />
9.0 mm<br />
10.0 mm<br />
13.0 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Page 79 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
CASTABLE<br />
ABUTMENTS<br />
STRAIGHT CASTABLE ABUTMENT<br />
* Screw included<br />
NP<br />
GP-CCAH-NP<br />
GP-CCANH-NP<br />
RP<br />
GP-CCAH-RP<br />
GP-CCANH-RP<br />
Type<br />
Hex<br />
Non Hex<br />
Type<br />
Hex<br />
Non Hex<br />
Abutment Height<br />
10.0 mm<br />
10.0 mm<br />
Abutment Height<br />
10.0 mm<br />
10.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
STRAIGHT UCLA WITH CHROME COBLAT BASE<br />
* Screw included<br />
NP<br />
GP-CCBH-NP<br />
GP-CCBNH-NP<br />
RP<br />
GP-CCBH-RP<br />
GP-CCBNH-RP<br />
Type<br />
Hex<br />
Non Hex<br />
Type<br />
Hex<br />
Non Hex<br />
Abutment Height<br />
10.5 mm<br />
10.5 mm<br />
Abutment Height<br />
10.5 mm<br />
10.5 mm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
Ncm<br />
25 Ncm<br />
25 Ncm<br />
Page 80 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
ZIRCONIA<br />
ABUTMENTS<br />
STRAIGHT ANATOMIC ZIRCONIA ABUTMENT<br />
* Screw included<br />
NP<br />
GP-SZ01-NP<br />
GP-CZS02-NP<br />
GP-CZS03-NP<br />
GP-CZS04-NP<br />
Collar Height<br />
1.0 mm<br />
1.5 mm<br />
2.0 mm<br />
3.0 mm<br />
Abutment Height<br />
9.5 mm<br />
10.0 mm<br />
10.5 mm<br />
11.5 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
RP<br />
GP-CZS01-RP<br />
GP-CZS02-RP<br />
GP-CZS03-RP<br />
GP-CZS04-RP<br />
Collar Height<br />
1.0 mm<br />
1.5 mm<br />
2.0 mm<br />
3.0 mm<br />
Abutment Height<br />
9.5 mm<br />
10.0 mm<br />
10.5 mm<br />
11.5 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15° 15°<br />
NP<br />
GP-CZ1501-NP<br />
GP-CZ1502-NP<br />
GP-CZ1503-NP<br />
RP<br />
GP-CZ1501-RP<br />
GP-CZ1502-RP<br />
GP-CZ1503-RP<br />
Abutment Height<br />
10.0 mm<br />
10.5 mm<br />
11.5 mm<br />
10.0 mm<br />
10.5 mm<br />
11.5 mm<br />
Collar Height<br />
1.5 mm<br />
2.0 mm<br />
3.0 mm<br />
1.5 mm<br />
2.0 mm<br />
3.0 mm<br />
Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
15 Ncm<br />
Page 81 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
SCREW-RETAINED RESTORATION<br />
PENDING<br />
MULTI UNIT<br />
SYSTEMS<br />
i<br />
30 Ncm for Abutment<br />
15 Ncm for Prosthetics<br />
STRAIGHT MULTI UNIT<br />
* Screw included<br />
NP<br />
GP-CMUA01-NP<br />
GP-CMUA02-NP<br />
GP-CMUA03-NP<br />
GP-CMUA04-NP<br />
Collar Height<br />
1.5 mm<br />
2.5 mm<br />
3.5 mm<br />
4.5 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
RP<br />
GP-CMUA01-RP<br />
GP-CMUA02-RP<br />
GP-CMUA03-RP<br />
GP-CMUA04-RP<br />
Collar Height<br />
1.5 mm<br />
2.5 mm<br />
3.5 mm<br />
4.5 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
Ø 4.8 mm<br />
STRAIGHT MULTI UNIT - FULL SET<br />
x1 x1 x1 x2 x1 x1 x1<br />
PRODUCT<br />
CODE<br />
COLLAR<br />
HEIGHT<br />
Multi Unit<br />
Abutment<br />
Titanium<br />
Sleeve<br />
Plastic<br />
Sleeve<br />
Fixation<br />
Screw<br />
Healing<br />
Abutment<br />
Lab<br />
Analog<br />
Transfer<br />
Opened-Tray<br />
NP<br />
RP<br />
GP-SETMU01-NP<br />
GP-SETMU01-RP<br />
1.5 mm<br />
NP<br />
RP<br />
GP-SETMU02-NP<br />
GP-SETMU02-RP<br />
2.5 mm<br />
+<br />
NP<br />
RP<br />
GP-SETMU03-NP<br />
GP-SETMU03-RP<br />
3.5 mm<br />
GP-CTMSU GP-CPSMU GP-CFSMUL<br />
GP-CHMU<br />
GP-CANU<br />
GP-CTMU<br />
NP<br />
RP<br />
GP-SETMU04-NP<br />
GP-SETMU04-RP<br />
4.5 mm<br />
Page 82 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
ANGULATED MULTI UNITS<br />
* Screw included<br />
17°<br />
17°<br />
NP<br />
GP-CMU1701-NP<br />
GP-CMU1702-NP<br />
RP<br />
GP-CMU1701-RP<br />
GP-CMU1702-RP<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
Abutment Height<br />
2.5 mm<br />
3.5 mm<br />
Abutment Height<br />
3.5 mm<br />
3.5 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30°<br />
30°<br />
NP<br />
GP-CMU3001-NP<br />
GP-CMU3002-NP<br />
RP<br />
GP-CMU3001-RP<br />
GP-CMU3002-RP<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
Abutment Height<br />
3.5 mm<br />
4.5 mm<br />
Abutment Height<br />
3.5 mm<br />
4.5 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
ANGULATED MULTI UNITS - FULL SETS<br />
x1<br />
x1 x2 x1 x1 x1<br />
Multi Unit<br />
Abutment<br />
Titanium<br />
Sleeve<br />
Plastic<br />
Sleeve<br />
Fixation<br />
Screw<br />
Healing<br />
Abutment<br />
Lab<br />
Analog<br />
Transfer<br />
Opened-Tray<br />
17°<br />
PRODUCT<br />
CODE<br />
ABUTMENT<br />
HEIGHT<br />
+<br />
NP<br />
RP<br />
GP-SETMU1701-NP<br />
GP-SETMU1701-RP<br />
2.5mm<br />
GP-CTMSU GP-CPSMU GP-CFSMUL<br />
GP-CHMU<br />
GP-CANU<br />
GP-CTMU<br />
NP<br />
RP<br />
GP-SETMU1702-NP<br />
GP-SETMU1702-RP<br />
3.5mm<br />
30°<br />
PRODUCT<br />
CODE<br />
ABUTMENT<br />
HEIGHT<br />
+<br />
NP<br />
RP<br />
GP-SETMU3001-NP<br />
GP-SETMU3001-RP<br />
3.5mm<br />
GP-CTMSU GP-CPSMU GP-CFSMUL GP-CHMU GP-CANU GP-CTMU<br />
NP<br />
RP<br />
GP-SETMU3002-NP<br />
GP-SETMU3002-RP<br />
4.5mm<br />
Page 83 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
REMOVEABLE DENTURE RESTORATION<br />
PENDING<br />
LOCATORS<br />
STRAIGHT LOCATORS<br />
NP<br />
GP-CLC01-NP<br />
GP-CLC02-NP<br />
GP-CLC03-NP<br />
GP-CLC04-NP<br />
GP-CLC05-NP<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 4.0 mm<br />
Ø 4.0 mm<br />
Ø 4.0 mm<br />
Ø 4.0 mm<br />
Ø 4.0 mm<br />
RP<br />
GP-CLC01-RP<br />
GP-CLC02-RP<br />
GP-CLC03-RP<br />
GP-CLC04-RP<br />
GP-CLC05-RP<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 4.0 mm<br />
Ø 4.0 mm<br />
Ø 4.0 mm<br />
Ø 4.0 mm<br />
Ø 4.0 mm<br />
PRODUCT<br />
CODE<br />
COLLAR<br />
HEIGHT<br />
x1<br />
x1 x1 x1 x1 x1 x1<br />
NP<br />
RP<br />
GP-SETCL01-NP<br />
GP-SETCL01-RP<br />
1.0 mm<br />
Ball<br />
Attachment<br />
Transparent<br />
Cap<br />
Pink<br />
Cap<br />
Violet<br />
Cap<br />
Yellow<br />
Cap<br />
Metal<br />
Housing<br />
Protective<br />
Disk<br />
NP<br />
RP<br />
GP-SETCL02-NP<br />
GP-SETCL02-RP<br />
2.0 mm<br />
NP<br />
RP<br />
GP-SETCL03-NP<br />
GP-SETCL03-RP<br />
3.0 mm<br />
+<br />
NP<br />
RP<br />
GP-SETCL04-NP<br />
GP-SETCL04-RP<br />
4.0 mm<br />
GP-LOC101 GP-LOC104 GP-LOC103<br />
GP-LOC102<br />
GP-LOCMH<br />
GP-LOCDISK<br />
NP<br />
RP<br />
GP-SETCL05-NP<br />
GP-SETCL05-RP<br />
5.0 mm<br />
Page 84 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
ANGULATED LOCATORS<br />
* Screw included<br />
17°<br />
17°<br />
NP<br />
GP-AL1701-NP<br />
GP-AL1702-NP<br />
GP-AL1703-NP<br />
RP<br />
GP-AL1701-RP<br />
GP-AL1702-RP<br />
GP-AL1703-RP<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
Abutment Height<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
Locator<br />
Abutment<br />
Transparent<br />
Cap<br />
Pink<br />
Cap<br />
Violet<br />
Cap<br />
Yellow<br />
Cap<br />
Metal<br />
Housing<br />
Protective<br />
Disk<br />
PRODUCT<br />
CODE<br />
COLLAR<br />
HEIGHT<br />
17°<br />
NP<br />
RP<br />
GP-FAL1701-NP<br />
GP-FAL1701-RP<br />
1.0 mm<br />
+<br />
NP<br />
RP<br />
GP-FAL1702-NP<br />
GP-FAL1702-RP<br />
2.0 mm<br />
GP-LOC101<br />
GP-LOC104<br />
GP-LOC103<br />
GP-LOC102<br />
GP-LOCMH<br />
GP-LOCDISK<br />
NP<br />
RP<br />
GP-FAL1703-NP<br />
GP-FAL1703-RP<br />
3.0 mm<br />
30°<br />
30°<br />
NP<br />
GP-AL3001-NP<br />
GP-AL3002-NP<br />
GP-AL3003-NP<br />
RP<br />
GP-AL3001-RP<br />
GP-AL3002-RP<br />
GP-AL3003-RP<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
Abutment Height<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
x1<br />
Locator<br />
Abutment<br />
Transparent<br />
Cap<br />
Pink<br />
Cap<br />
Violet<br />
Cap<br />
Yellow<br />
Cap<br />
Metal<br />
Housing<br />
Protective<br />
Disk<br />
PRODUCT<br />
CODE<br />
COLLAR<br />
HEIGHT<br />
30°<br />
NP<br />
RP<br />
GP-FAL3001-NP<br />
GP-FAL3001-RP<br />
1.0 mm<br />
+<br />
NP<br />
RP<br />
GP-FAL3002-NP<br />
GP-FAL3002-RP<br />
2.0 mm<br />
GP-LOC101<br />
GP-LOC104<br />
GP-LOC103<br />
GP-LOC102<br />
GP-LOCMH<br />
GP-LOCDISK<br />
NP<br />
RP<br />
GP-FAL3003-NP<br />
GP-FAL3003-RP<br />
3.0 mm<br />
Page 85 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
CAPS & TOOLS INFO FOR LOCATORS<br />
Code<br />
GP-LOC101<br />
Code<br />
GP-LOC103<br />
Code<br />
GP-LOCMH<br />
Color<br />
Transparent<br />
Color<br />
Violet<br />
Color<br />
Silver<br />
Strength<br />
1.8 kg / 4.0 lbs<br />
Strength<br />
2.5 kg / 5.5 lbs<br />
Strength<br />
Ø 5.6 mm<br />
Type<br />
Standard Cap<br />
Type<br />
Strong Cap<br />
Type<br />
Metal Housing<br />
Code<br />
GP-LOC102<br />
Code<br />
GP-LOC104<br />
Code<br />
GP-LOCDISK<br />
Color<br />
Yellow<br />
Color<br />
Pink<br />
Color<br />
Pink<br />
Strength<br />
0.6 kg / 1.3 lbs<br />
Strength<br />
1.2 kg / 2.6 lbs<br />
Strength<br />
Ø 14.0 mm<br />
Type<br />
Extra-soft Cap<br />
Type<br />
Soft Cap<br />
Type<br />
Protective Disk<br />
TOOL & ANALOG<br />
GP-LOCTOOL<br />
Locator Universal Insertion<br />
& Extraction tool<br />
Analog for locators<br />
Ø mm Ø 3.75 mm<br />
GP-LOCAN<br />
Abutment Height 10.0 mm<br />
Page 86 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
REMOVEABLE DENTURE RESTORATION<br />
PENDING<br />
BALL<br />
ATTACHMENTS<br />
BALL ATTACHMENTS<br />
NP<br />
GP-CBAL01-NP<br />
GP-CBAL02-NP<br />
GP-CBAL03-NP<br />
GP-CBAL04-NP<br />
GP-CBAL05-NP<br />
GP-CBAL06-NP<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
6.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
RP<br />
GP-CBAL01-RP<br />
GP-CBAL02-RP<br />
GP-CBAL03-RP<br />
GP-CBAL04-RP<br />
GP-CBAL05-RP<br />
GP-CBAL06-RP<br />
Collar Height<br />
1.0 mm<br />
2.0 mm<br />
3.0 mm<br />
4.0 mm<br />
5.0 mm<br />
6.0 mm<br />
Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
30 Ncm<br />
Ø mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
Ø 3.8 mm<br />
Page 87 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Conical Connection - NP 3.5 | RP 4.2 | RP 5.0<br />
PENDING<br />
BALL ATTACHMENT SETS<br />
PRODUCT<br />
CODE<br />
COLLAR<br />
HEIGHT<br />
NP<br />
RP<br />
GP-CBALS01-NP<br />
GP-CBALS01-RP<br />
1.0 mm<br />
x1 x1<br />
x1 x1<br />
x1 x1 x1<br />
NP<br />
RP<br />
GP-CBALS02-NP<br />
GP-CBALS02-RP<br />
2.0 mm<br />
Ball<br />
Attachment<br />
Transparent<br />
Silicon cap<br />
Black<br />
Cap<br />
Pink<br />
Cap<br />
Yellow<br />
Cap<br />
Metal<br />
Housing<br />
Protective<br />
Disk<br />
NP<br />
RP<br />
GP-CBALS03-NP<br />
GP-CBALS03-RP<br />
3.0 mm<br />
NP<br />
RP<br />
GP-CBALS04-NP<br />
GP-CBALS04-RP<br />
4.0 mm<br />
+<br />
NP<br />
RP<br />
GP-CBALS05-NP<br />
GP-CBALS05-RP<br />
5.0 mm<br />
GP-B2506 GP-B2507 GP-B2505<br />
GP-B2504<br />
GP-BAMH<br />
GP-BDISK<br />
NP<br />
RP<br />
GP-CBALS06-NP<br />
GP-CBALS06-RP<br />
6.0 mm<br />
CAPS & TOOLS INFO FOR BALL ATTACHMENT<br />
Code<br />
GP-B2501<br />
Code<br />
GP-B2505<br />
Code<br />
GP-B2507<br />
Color<br />
Silver<br />
Color<br />
Pink<br />
Color<br />
Black lab cap<br />
Size<br />
Normal Ø 2.5mm<br />
Size<br />
Normal Ø 2.5mm<br />
Size<br />
Normal Ø 2.5mm<br />
Strength<br />
0.35kg<br />
Strength<br />
0.9kg<br />
Strength<br />
0kg<br />
Type<br />
Elastic & Gummy<br />
Type<br />
Soft retention<br />
Code<br />
Color<br />
Size<br />
Strength<br />
GP-B2502<br />
Gold<br />
Normal Ø 2.5mm<br />
0.5kg<br />
Code<br />
Color<br />
Size<br />
Strength<br />
Type<br />
GP-B2506<br />
Transparent<br />
Normal Ø 2.5mm<br />
1.3kg<br />
Standard retention<br />
Code<br />
Color<br />
Size<br />
GP-BAMH<br />
Metal Housing<br />
Normal Ø 4.6mm<br />
Code<br />
GP-B2503<br />
Color<br />
Green<br />
Size<br />
Normal Ø 2.5mm<br />
Strength<br />
0.35kg<br />
Type<br />
Code<br />
Very elastic<br />
GP-B2504<br />
TOOLS & PROSTHETICS<br />
Color<br />
Yellow<br />
Size<br />
Strength<br />
Type<br />
Normal Ø 2.5mm<br />
0.5kg<br />
Extra soft retention<br />
GP-BAINS<br />
Multiuse tool inserter/ extractor<br />
for ball attachments<br />
Analog for Ball Attachment<br />
Impression Coping Transfer<br />
for Ball Attachment<br />
Code<br />
Color<br />
GP-LOC103<br />
Violet<br />
Ø mm<br />
Ø 4.4 mm<br />
Strength<br />
Type<br />
2.5 kg / 5.5 lbs<br />
Strong Cap<br />
GP-BAAN<br />
Abutment Height<br />
14.0 mm<br />
GP-BATR<br />
Page 88 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
SURGICAL<br />
TOOLS<br />
Page 89 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Surgical Equipment<br />
STOPPER DRILLS KIT<br />
Code: GP-STOPKIT<br />
Reliable and durable stopper kit.<br />
Nowadays, most of dental professionals<br />
are driven away from the attachable<br />
stoppers technique- due to the lack of<br />
the precision and decontamination of the<br />
tissues.<br />
Best for:<br />
- Sinus lifting procedure<br />
- Immediate Loading<br />
- Delayed Loading<br />
Excellent biocompatibility, to reach the<br />
optimal osseointegration and complete<br />
healing process with no abruption.<br />
Promotes earlier bone apposition and<br />
provides greater stability during the first<br />
critical weeks after placement.<br />
Pros<br />
Made of high-quality surgical<br />
materials embed with a<br />
DNT² Dark Grey coating, with<br />
an outstanding corrosion<br />
resistance and exceptional<br />
durability.<br />
Minimum Drill/Bone heat<br />
generation, low vibrancy,<br />
controlled and precise work<br />
with confidence.<br />
Universal sizes, compatible with<br />
the most implant sizes on the<br />
market.<br />
Special length marks that stay<br />
visible even in the harshest<br />
conditions.<br />
PRODUCT CODE<br />
GP-STOPKIT<br />
Drill Ø 2.0 mm Length Code<br />
6.0mm L<br />
8.0mm L<br />
10.0mm L<br />
11.5mm L<br />
13.0mm L<br />
GP-SD2006<br />
GP-SD2008<br />
GP-SD2010<br />
GP-SD2011<br />
GP-SD2013<br />
Drill Ø 2.8 mm Length Code<br />
6.0mm L<br />
8.0mm L<br />
10.0mm L<br />
11.5mm L<br />
13.0mm L<br />
GP-SD2806<br />
GP-SD2808<br />
GP-SD2810<br />
GP-SD2811<br />
GP-SD2813<br />
Drill Ø 3.2 mm Length Code<br />
6.0mm L<br />
8.0mm L<br />
10.0mm L<br />
11.5mm L<br />
13.0mm L<br />
GP-SD3206<br />
GP-SD3208<br />
GP-SD3210<br />
GP-SD3211<br />
GP-SD3213<br />
Page 90 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Surgical Equipment<br />
STOPPER DRILLS KIT<br />
Drill Ø 3.65 mm Length Code<br />
6.0mm L<br />
8.0mm L<br />
10.0mm L<br />
11.5mm L<br />
13.0mm L<br />
GP-SD3606<br />
GP-SD3608<br />
GP-SD3610<br />
GP-SD3611<br />
GP-SD3613<br />
Drill Ø 4.0 mm Length Code<br />
6.0mm L<br />
GP-SD4006<br />
8.0mm L<br />
GP-SD4008<br />
10.0mm L<br />
GP-SD4010<br />
11.5mm L<br />
GP-SD4011<br />
13.0mm L<br />
GP-SD4013<br />
Drill Ø 4.5 mm Length Code<br />
6.0mm L<br />
GP-SD4006<br />
8.0mm L<br />
GP-SD4008<br />
10.0mm L<br />
GP-SD4010<br />
11.5mm L<br />
GP-SD4011<br />
13.0mm L<br />
GP-SD4013<br />
Drill Product Name Length Code<br />
Lance Drill Ø1.5mm - 13.0mm L GP-LEND<br />
Round Bur Ø3.0mm GP-RBAR<br />
Drill Extender 29.0mm GP-DXT<br />
Page 91 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Surgical Equipment<br />
MINI SURGICAL KIT<br />
Code: GP-SK1<br />
PRODUCT CODE<br />
GP-SK1<br />
A B C D E F G H<br />
Premium box, made in Italy<br />
High quality tools, made in Germany<br />
Long-lasting drills, made in Italy<br />
Cutting Edge and precise drivers, made in-house,<br />
in our own-state-of-art facility in Israel<br />
Inside the tools kit<br />
CODE PRODUCT QTY REF<br />
GP-RR Regular Ratchet 1 A<br />
GP-HA13 Manual screw driver 1.25mm - 15mm Height 1 G<br />
GP-PD15 Hex driver long 1.25mm - 15mm height 1 C<br />
GP-MM125 Motor mount 1.25mm 1 E<br />
GP-MM242 Motor mount 2.42mm for SSI Implant 1 D<br />
GP-HD15 Hex driver long 2.42mm for SSI Implant 1 B<br />
GP-DXT Drill Extender 29.0mm 1 F<br />
GP-DLCSET DLC Premium Drills Set (MD Included) 7 H<br />
Page 92 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Surgical Equipment<br />
TOOLS FOR SURGERY<br />
CODE PRODUCT<br />
GP-RR<br />
Regular Ratchet<br />
GP-RTT<br />
GP-SCD<br />
GP-SDB<br />
Torque Ratchet<br />
Surgical Screwdriver 6.35mm Hexagonal Head<br />
Manual Surgical Implantdriver 2.42mm<br />
All our implant systems share<br />
the same hexagonal carrier size.<br />
Internal hex RP/NP and Conical<br />
Connection NP/RP.<br />
GP-PP10<br />
GP-PP16<br />
Parallel / DEPTH GUIDES 10mm Length<br />
Parallel / DEPTH GUIDES 16mm Length<br />
For accurate measurement of<br />
osteotomy depth, parallel check<br />
and X-ray distortion. Each step is<br />
1 mm.<br />
Tools for Implants<br />
INTERNAL HEX DRIVERS<br />
GP-HD15<br />
Hex driver 2.42mm, 15mm L<br />
Hex 2.42<br />
GP-HD07<br />
Hex driver 2.42mm, 7mm L<br />
GP-MML2428<br />
Contra Angle Motor Mount 2.42mm, 28mm L<br />
GP-MMS2420<br />
Contra Angle Motor Mount 2.42mm, 20mm L<br />
RP<br />
INTERNAL HEX DRIVERS - NP 2.0<br />
GP-TIT15<br />
Hex driver 2.0mm, 15mm L<br />
Hex 2.00<br />
GP-HIT07<br />
Hex driver 2.0mm, 7mm L<br />
GP-MML2028<br />
GP-MMS2020<br />
Contra Angle Motor Mount 2.0mm, 28mm L<br />
Contra Angle Motor Mount 2.0mm, 20mm L<br />
NP<br />
Page 93 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Surgical Equipment<br />
Tools for Implants<br />
CONICAL CONNECTION - RP<br />
RP<br />
GP-TRP15<br />
Hex driver 2.6mm, 15mm L<br />
Hex 2.67<br />
GP-TRP07<br />
Hex driver 2.6mm, 7mm L<br />
GP-CMM28RP<br />
Contra Angle Motor Mount 2.6mm, 28mm L<br />
GP-CMM20RP<br />
Contra Angle Motor Mount 2.6mm, 20mm L<br />
RP<br />
CONICAL CONNECTION - NP<br />
NP<br />
GP-TNP15<br />
Hex driver 2.2mm, 15mm L<br />
Hex 2.26<br />
GP-TNP07<br />
Hex driver 2.2mm, 7mm L<br />
GP-CMM28NP<br />
GP-CMM20NP<br />
Contra Angle Motor Mount 2.2mm, 28mm L<br />
Contra Angle Motor Mount 2.2mm, 20mm L<br />
NP<br />
TOOLS FOR PROSTHETICS PARTS 1.25mm<br />
CODE PRODUCT<br />
GP-HA07<br />
Manual Hand driver 1.25mm, 7mm Length<br />
HP-HA15<br />
Manual Hand driver 1.25mm, 15mm Length<br />
HP-PD15<br />
Hex driver 1.25mm, 15mm Length<br />
GP-PD07<br />
Hex driver 1.25mm, 7mm Length<br />
GP-MML125<br />
Contra Angle Motor Mount 1.25mm Long<br />
GP-MMS125<br />
Contra Angle Motor Mount 1.25mm Short<br />
Page 94 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Surgical Equipment<br />
DLC COATING DRILLS (DIAMOND LIKE CARBON)<br />
AVAILABLE DIAMETERS<br />
COLOR<br />
DIAMETER<br />
• Color Coded<br />
• Length: 15mm<br />
• Material – Polished high quality Stainless Steel for smooth cutting<br />
• DLC Coating – Diamond Like Carbon – for low friction,<br />
high hardness, and high corrosion resistance.<br />
• Lasts longer than regular titanium drills<br />
Ø 2.0<br />
Ø 2.8<br />
Ø 3.2<br />
Ø 3.65<br />
Ø 4.3<br />
Ø 5.2<br />
MARK DRILL<br />
Ø 1.9 MD<br />
SET CODE<br />
GP-DLCSET<br />
1.9<br />
(mark drill)<br />
2.0 2.8 3.2 3.65 4.3 5.2<br />
ADDITIONAL DRILLS<br />
DRILL EXTENSION (STAINLESS STEEL)<br />
REF: GP-DXT<br />
* Extends drills by 17.5 mm<br />
IMPLANT SURGICAL EXTERNAL IRRIGATION COUNTERSINK DRILL<br />
REF: GP-CSD3742<br />
Ø3.75-4.2<br />
REF: GP-CSD5060<br />
Ø5.0-6.0<br />
Page 95 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
NEW PATENTED IMPLANT STOPPER<br />
Load the implant until it stops<br />
Thanks to the brilliant implant carrier design, loading implants becames much easier. It's so easy<br />
that you can even do it with eyes closed.<br />
Step 1 - Use stopper drills<br />
Step 2 - Load the implant until it stops<br />
It's as easy as counting 1,2.... (without 3)<br />
SAFE PRECISE BRILLIANT<br />
Interested to try before everyone else?<br />
Page 96 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Page 97 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
Page 98 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17
TESTIMONIALS<br />
High Quality<br />
and Predictable Implants<br />
I have been using GP implants for my last 50<br />
cases and results are same, if not better than the<br />
other implants I have in my office. Fantastic for<br />
immediates due to the design.<br />
I am now a loyal user!<br />
“<br />
“<br />
The Best Dental Implants<br />
I met the company by chance a few years ago.<br />
I have discovered an excellent company with<br />
great precision in production. Staff prepared and<br />
available. Great product.<br />
Dr. Jeng Chester, DDS<br />
Thank you.<br />
Dr. Campanella Claudio<br />
Excellent Products<br />
“<br />
GP implants have had an increase in my<br />
dental practice due to the fact that they all<br />
have been very successful. GP implants are<br />
trustworthy and have a good price. I have<br />
been working with GP implants for the past<br />
7 years and we have placed at least 500<br />
implants up to this day. I highly recommend<br />
them.<br />
“<br />
The SSI Implant by GP is an excellent choice<br />
for clinical cases with complications related<br />
to anatomy. It is so easy and safe to load the<br />
implant, and it gives impeccable results postoperatively,<br />
with respect to osseointegration.<br />
I was simply amazed when I saw the X-ray<br />
where the bone was strongly integrating with<br />
the implant surface<br />
Dr. Rodolfo Gutierrez<br />
Craig D. Schmidtke, DDS<br />
Page 99 web: www.gp-implant.com store: www.gp-direct.com mob: +(972) 538 205 494 Product catalog v2.17
© GP Implants LTD 2020, All rights reserved.<br />
GP Implants® and/or other trademarks and logos from GP<br />
Implants® mentioned here in are the trademarks or registered<br />
trademarks of GP Implants Holding AG and/or its affiliates. All<br />
rights reserved.<br />
Website www.gp-implant.com<br />
Online Store www.gp-direct.com<br />
Email sales@gp-implant.com<br />
WhatsApp +972 (0) 538 205 494<br />
GP Implants is certified under EN ISO 9001:2008, SN EN ISO<br />
13485:2012 MDD 93/42/EEC Annex II and is authorized to use<br />
the CE mark on all it’s products. All products are 510 (k) cleared<br />
by the FDA.<br />
VISIT US ONLINE<br />
Online Store<br />
www.gp-direct.com<br />
Website<br />
www.gp-implant.com<br />
Page 100 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17