The Frankfurt Zeil Grid Shell - RiuNet

More documents

Recommendations

Info

Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium 2009, Valencia Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures 2.2. Geometry meshing Figure 2: Original shape Figure 3: Optimized shape In the next design step, the 3D-shape had to be transferred into a structural grid. Due to the complex geometry a simple projection method could not be used in this case. Standardized methods and tools do not exist for this task. Often, automatic mesh generators from FEanalysis- or 3D modelling software are used. However, they usually do not lead to satisfying results. These meshing tools start from the boundaries and connect separately generated zones, which leads to irregular meshes in the centre. This isn’t satisfying from neither an aesthetical nor structural point of view. Figure 4 1370
Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium 2009, Valencia Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures Figure 4: automatically generated mesh (left) and result with scripted tools (right) Figure 5: interior view of autogenerated mesh (left) and result with scripted tools (right) 1371
Page 1 and 2: Proceedings of the International As
Page 3: Proceedings of the International As

The Frankfurt Zeil Grid Shell - RiuNet

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?