MagicWatch MWE810 - Waeco
MagicWatch MWE810 - Waeco
MagicWatch MWE810 - Waeco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
_IA_<strong>MWE810</strong>.book Seite 17 Mittwoch, 9. Mai 2012 3:09 15<br />
<strong>MagicWatch</strong> <strong>MWE810</strong><br />
Connecting the parking aid<br />
7 Connecting the parking aid<br />
See fig. e<br />
I<br />
NOTE<br />
On some vehicles, the reversing light only works when the ignition<br />
is switched on. In this case, you must switch on the ignition in order<br />
to identify the positive and earth wires.<br />
The complete circuit diagram can be found in fig. e.<br />
Item<br />
Description<br />
1 Control electronics<br />
2 Red wire: connection to the reversing light<br />
3 Black wire: connection to ground<br />
4 Reversing light<br />
5 Connection cable for the loudspeaker: connection to the socket of the connection<br />
cable for the control electronics<br />
6 Connection cable for the control electronics<br />
7 Sensor extension cable<br />
L (red): far left on the bumper<br />
CL (yellow): centre left on the bumper<br />
CR (green): centre right on the bumper<br />
R (blue): far right on the bumper<br />
8 Sensors<br />
8 Detection range<br />
See fig. f<br />
The detection range of the parking aid is divided into three zones:<br />
• Zone 1<br />
This zone is the first limit range. Small objects or those with poor reflective<br />
characteristics may not be detected.<br />
• Zone 2<br />
Nearly all objects are displayed in this zone.<br />
EN<br />
17