SR1-K-3 (BESF/BESB) - exhausto.de
SR1-K-3 (BESF/BESB) - exhausto.de
SR1-K-3 (BESF/BESB) - exhausto.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3000628-2006-04-26.fm Usage<br />
1. Usage<br />
<strong>SR1</strong>-K-3 … used for EXHAUSTO fans <strong>BESF</strong> and <strong>BESB</strong> with motor power relay (MPR).<br />
Operation It is possible to run two-speed operation controlled by an external timer or a similar<br />
<strong>de</strong>vice.<br />
If the motor overheats, the automatic system box must be reset manually.<br />
2. Description<br />
The control system consists of a control panel and an automatic system box:<br />
Control panel The control panel is used to start and stop the fan, and to set the fan speed for normal<br />
operation. It features indicator lights for operation, overheated motor warning and<br />
minimum speed setting. The panel is supplied with low-voltage current from the<br />
automatic system box.<br />
Automatic system<br />
box<br />
Control panel<br />
Automatic system<br />
box<br />
EXH AUSTO<br />
The automatic system box contains a safety function that protects the motor against<br />
overheating, and a system for setting the fan speed via an external clock function or a<br />
similar <strong>de</strong>vice. The safety function that protects the motor against overheating consists<br />
of a thermal cut-out in the motor, which is linked to the automatic system box. When an<br />
error signal is sent from the thermal cut-out, the power supply to the motor is cut and the<br />
warning light is illuminated. To reset, switch off the function circuit breaker and then<br />
switch it on again.<br />
2/16<br />
180<br />
130<br />
Function circuit breaker<br />
for manual reset<br />
r