Anleitung - Massoth

Register Programming / Writing CVs indirectly
Register programming was the first method of CV programming. The CV value is to be entered into
an intermediate variable. The Decoder thereafter does the real programming. This method is
supported by the eMOTION XL Decoder too. The input into register 5 and 6 is accomplished with
the DiMAX Navigator or any other hand held controller. The CVs 1 to 4 are entered directly; all other
CVs with higher numbers are programmed per register programming.
PoM Programming on Main (Main Track)
The PoM Method is the only procedure to accomplish programming on the main track. All of the CV
programming can be done except CV1 (address) with the eMOTION XL Decoder.
33