17 Service 10-07-30.indd, page 7 @ Preflight - Werkö GmbH
17 Service 10-07-30.indd, page 7 @ Preflight - Werkö GmbH
17 Service 10-07-30.indd, page 7 @ Preflight - Werkö GmbH
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
<strong>Service</strong><br />
Ausführung mit Schälanschnitt für Durchgangsgewinde<br />
/ Design with spiral point for through holes<br />
5°<br />
Schälanschnittwinkel / Angle of spiral point<br />
6 - 8 Gang / Threads<br />
Schälanschnittlänge / Length of spiral point<br />
Anschnittformen DIN 2197 / Types of Lead DIN 2197<br />
Form A<br />
langer Anschnitt 6 - 8 Gang<br />
für Durchgangsgewinde<br />
Long taper 6 to 8 threads for<br />
through holes<br />
3,5 - 5 Gang / Threads<br />
Form B<br />
mittlerer Anschnitt 3,5 - 5<br />
Gang mit Schälanschnitt<br />
Medium taper 3.5 to 5 threads<br />
with spiral for through holes<br />
221<br />
Ausführung drallgenutet für Grundgewinde /<br />
Design with helical fl utes for blind holes<br />
2 - 3 Gang / Threads<br />
Form C<br />
kurzer Anschnitt 2 - 3 Gang<br />
für Grundlochgewinde<br />
Short taper 2 - 3 threads for<br />
blind holes<br />
Drallwinkel / Helix angle<br />
3,5 - 5 Gang / Threads<br />
Form D<br />
mittlerer Anschnitt 3,5 - 5<br />
Gang für Durchgangs- und<br />
Grundlochgewinde mit<br />
langem Auslauf<br />
Medium taper 3.5 to 5 threads<br />
for through and blind holes<br />
with long runout<br />
Durchgangsgewinde / Through holes Grundgewinde / Blind holes<br />
1,5 - 2 Gang / Threads<br />
Form E<br />
kurzer Anschnitt 1,5 - 2 Gang<br />
für Durchgangs- und<br />
Grundgewinde mit kurzem<br />
Auslauf<br />
Short taper 1.5 - 2 threads for<br />
through and blind holes with<br />
short runout<br />
SERVICE