Table Top Miter Saw Universal-Kapp- und Gehrungssäge ... - Makita
Table Top Miter Saw Universal-Kapp- und Gehrungssäge ... - Makita
Table Top Miter Saw Universal-Kapp- und Gehrungssäge ... - Makita
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
ENGLISH<br />
1 Auxiliary plate<br />
2 Hex bolt<br />
3 Base<br />
4 Nut<br />
5 Bolt<br />
6 Lower blade guard A<br />
7 Lower blade guard B<br />
8 <strong>Top</strong> blade guard<br />
9 Screw<br />
10 Handle<br />
11 Lever<br />
12 Socket wrench<br />
13 Adjusting bolt<br />
14 <strong>Top</strong> surface of turn base<br />
15 Periphery of blade<br />
16 Guide fence<br />
17 Pointer<br />
18 Lock lever<br />
19 Grip<br />
20 <strong>Miter</strong> scale<br />
21 Bevel scale<br />
22 Switch<br />
23 Lamp switch<br />
24 Lamps<br />
25 Stopper pin<br />
26 Clamping screw<br />
27 <strong>Top</strong> table<br />
28 Motor housing<br />
29 Center cover<br />
30 Shaft lock<br />
31 <strong>Saw</strong> blade<br />
12<br />
Explanation of general view<br />
32 Blade case<br />
33 Arrow<br />
34 Outer flange<br />
35 Inner flange<br />
36 Spindle<br />
37 Ring<br />
38 Riving knife<br />
39 Area to press in<br />
40 Blade width<br />
41 Rip fence holder<br />
42 Guide rail on the top table<br />
43 Clamping screw (A)<br />
44 Clamping screw (B)<br />
45 Rip fence<br />
46 Rip fence holder<br />
47 Workpiece<br />
48 Line to be aligned with<br />
49 Square nut<br />
50 Scale<br />
51 Two screws<br />
52 Dust nozzle<br />
53 Dust bag<br />
54 Fastener<br />
55 Cap<br />
56 Vacuum cleaner<br />
57 Blade cover<br />
58 Support<br />
59 Turn base<br />
60 Vise arm<br />
61 Vise rod<br />
62 Holder<br />
63 Holder assembly<br />
64 Vise knob<br />
65 Projection<br />
66 Vise shaft<br />
67 Rod 12<br />
68 Vise (optional accessory)<br />
69 Spacer block<br />
70 Aluminum extrusion<br />
71 Set plate<br />
72 Small boss<br />
73 Face/edge parallel<br />
74 Wood screw<br />
75 Glue together<br />
76 Hole (7 mm in diameter)<br />
77 Washer<br />
78 Nut<br />
79 Bolt M6<br />
80 Push stick<br />
81 Auxiliary fence<br />
82 Push block<br />
83 Triangular rule<br />
84 0° adjusting bolt<br />
85 Arm<br />
86 45° bevel angle adjusting bolt<br />
87 Limit mark<br />
88 Screwdriver<br />
89 Brush holder cap<br />
SPECIFICATIONS<br />
Model LH1040/LH1040F<br />
Blade diameter .................................................................................................................................. 255 mm – 260 mm<br />
Hole diameter<br />
For all countries other than European countries .......................................................................... 25.4 mm and 25 mm<br />
For European countries ......................................................................................................................................30 mm<br />
Max. Cutting capacities (H x W) with blade 260 mm in diameter in the miter saw mode<br />
Bevel angle<br />
0°<br />
45° (left)<br />
<strong>Miter</strong> angle<br />
0° 45°<br />
69 mm x 130 mm<br />
93 mm x 95 mm<br />
35 mm x 130 mm<br />
53 mm x 95 mm<br />
right 69 mm x 85 mm, 93 mm x 67 mm<br />
left 69 mm x 85 mm, 93 mm x 67 mm<br />
right 35 mm x 91 mm, 49 mm x 67 mm<br />
left 35 mm x 65 mm, 49 mm x 42 mm<br />
Max. Cutting capacities at 90° in the table saw (bench saw mode) ...................................................................... 40 mm<br />
No load speed (min –1 ) ............................................................................................................................................ 4,800<br />
<strong>Table</strong> size (W x L)................................................................................................................................260 mm x 405 mm<br />
Dimensions (L x W x H) .....................................................................................................530 mm x 476 mm x 535 mm<br />
Net weight ............................................................................................................................................................13.7 kg<br />
Safety class ............................................................................................................................................................. /II<br />
Due to our continuing program of research and development, the specifications herein are subject to change without<br />
notice.<br />
Note: Specifications may differ from country to country.