1/3” Tag/Nacht Dome-Kamera mit IR-Beleuchtung, Fix, VKCD-1329/IR
1/3” Tag/Nacht Dome-Kamera mit IR-Beleuchtung, Fix, VKCD-1329/IR
1/3” Tag/Nacht Dome-Kamera mit IR-Beleuchtung, Fix, VKCD-1329/IR
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
4. Installation<br />
NOTE: Never open the housing by unscrewing the bubble from the upper section of the housing, it is not<br />
possible to correctly reposition the bubble again. The locking bolt also may break off or fall out.<br />
1<br />
Furthermore, the foam ring, which also protects against scattered light, will be deformed.<br />
NOTE: The upper section of the housing may only be separated from the<br />
lower section by removing the 3 screws (see diagram).<br />
1. Remove dome cover by loosening 3 screws. Use Torx wrench provided with<br />
the package.<br />
2. Surface Mount:<br />
Using four ST4x38 screws, mount surface plate to a sturdy surface.<br />
Using four M4x 4 screws, affix flush mount base to surface plate.<br />
3. Flush Mount:<br />
Using four ST4x38 screws, affix flush mount base to a sturdy surface.<br />
A'<br />
Torx M4x8<br />
M4x 4<br />
A<br />
2 Surface Mount<br />
ST4x38<br />
Plastic dowels<br />
3<br />
ST4x38<br />
3 Flush Mount