Kantenprofile - Protektor
Kantenprofile - Protektor
Kantenprofile - Protektor
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
Bewegungsfugenprofile<br />
Movement joint profiles<br />
verzinktes Stahlblech/galvanised steel<br />
Außenputz: 14 mm/Exterior rendering: 14 mm<br />
7503<br />
7523<br />
7583<br />
7503/7523 Bewegungsfugenprofile für die Fläche aus<br />
verzinktem Stahlblech.<br />
Das Mittelteil besteht aus einer<br />
Kombination Hart- und Weich-PVC.<br />
Bewegungsaufnahme: Zug/Druck<br />
7503 +1/-1 mm<br />
7523 +3/-3 mm<br />
7583 Bewegungsfugenprofil für Innenecke aus<br />
verzinktem Stahlblech.<br />
Mittelteil aus einer Kombination Hart- und<br />
Weich-PVC bestehend.<br />
Bewegungsaufnahme:<br />
Zug/Druck<br />
+3/-3 mm<br />
Fugenschutzstreifen wird nach dem<br />
Verputzen an beiden Seiten, am besten<br />
mit einem Messer mit Hakenklinge,<br />
eingeschnitten und entfernt.<br />
Vorsicht: Nicht zu tief bis in das Dehnteil<br />
schneiden.<br />
7503/7523 Movement joint profile for the surface<br />
made of galvanised steel. The centre part<br />
consists of a combination of rigid and soft<br />
PVC.<br />
Movement absorption: Tension/Pressure<br />
7503 +1/-1 mm<br />
7523 +3/-3 mm<br />
7583 Movement joint profile for the inner corner<br />
made of galvanised or stainless steel.<br />
The centre part consists of a combination<br />
of rigid and soft PVC.<br />
Movement absorption:<br />
Tension/Pressure<br />
+3/-3 mm<br />
After plastering the joint protection strip<br />
is cut and removed at both sides,<br />
preferably with a knife with hook blade.<br />
Attention: Do not cut too deep into the<br />
expansion part.<br />
Einsatz nur senkrecht.<br />
Only vertical application.<br />
Profil<br />
Nr.<br />
Produkt<br />
Gruppe Längen in cm Fuge Verpackung<br />
mm 1 Bd. = Stäbe<br />
Putzd. „a“<br />
in mm<br />
Farb-Nr.<br />
Werkstoff<br />
Alternativ-Werkstoff<br />
No.<br />
Prod.<br />
group<br />
Length in cm<br />
Joint<br />
mm<br />
Packing<br />
lengths per bundle<br />
Plaster thickn<br />
"a" in mm<br />
Colour<br />
No.<br />
Material<br />
Alternate Material<br />
7503<br />
1530<br />
300<br />
6<br />
Fläche<br />
Surface<br />
10<br />
14<br />
10<br />
verz. Stahlblech , galvanised steel<br />
Edelstahl Rostfrei S. 45, stainless steel p. 45<br />
7523<br />
1530<br />
300<br />
12<br />
Fläche<br />
Surface<br />
10<br />
14<br />
10<br />
verz. Stahlblech , galvanised steel<br />
Edelstahl Rostfrei S. 45, stainless steel p. 45<br />
7583<br />
1530<br />
300<br />
6<br />
Innenecke<br />
Inner corner<br />
10<br />
14<br />
10<br />
verz. Stahlblech , galvanised steel<br />
Edelstahl Rostfrei S. 45, stainless steel p. 45<br />
Hart-PVC mit Weich-PVC-Einlage / Farb-Nr. 10 = weiß<br />
Rigid PVC with soft PVC lining, colour no. 10 = white<br />
55