Kantenprofile - Protektor
Kantenprofile - Protektor
Kantenprofile - Protektor
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
<strong>Kantenprofile</strong>, Inneneckprofile, Stoßleiste<br />
Corner beads, inner corner/eding profiles<br />
GK-Platten 9,5-12,5 mm/plasterboards 9,5-12,5 mm<br />
Hart-/Weich-PVC/rigid/soft PVC<br />
3776 3778<br />
3774<br />
3780<br />
3789<br />
3778 Einseitig eingeschnittene PVC-<strong>Kantenprofile</strong> zur Herstellung<br />
von gebogenen GK-Konstruktionen.<br />
Profil von Hand biegen und vollflächig einspachteln.<br />
3776/3778 <strong>Kantenprofile</strong> aus PVC zur Herstellung abgerundeter Kanten.<br />
Zur einwandfreien Montage müssen die GK-Plattenkanten<br />
angefast werden.<br />
3780 Inneneckprofil aus PVC zur Herstellung von Hohlkehlen im<br />
Inneneckbereich.<br />
3776/3778/ Bei Stoßbelastung müssen die Profile vollflächig mit Spachtel-<br />
3780 masse hinterfüllt werden.<br />
3774 Dekoratives halbrundes Spachtelprofil, z. B. als Stoßleiste für<br />
leichte Beanspruchung. Das Profil ist zusätzlich mit verzink<br />
ten Klammern zu befestigen.<br />
Bei Gehrungen u./o. Stoßbelastungen Profil mit Spachtelmasse<br />
hinterfüllen.<br />
3789 PVC-Kantenprofil zur Herstellung von einer 135° gefasten<br />
Kantenausbildung. Zur einwandfreien Montage muss mindestens<br />
eine GK-Platte angefast werden.<br />
3778 PVC corner bead, cut at one side, to realise curved plaster<br />
board constructions. The profile is to be bent manually and<br />
completely embeaded.<br />
3776/3778 PVC corner bead for curved constructions. For a proper<br />
installation the edges of the gypsum bord panels have to<br />
be bevelled.<br />
3780 Inner corner profile to form a furrow.<br />
3776/3778/ In case of impact load backfill profiles completely with<br />
3780 filler.<br />
3774 Half-round PVC rail for decorative purposes or as guard rail<br />
horizontally. First fix profile with galvanised clamps, than apply<br />
skim coat. In case of mitre joints and/or impact load back-fill<br />
profiles completely with filler.<br />
3789 PVC-corner profile for execution of 135° corner. For<br />
correct execution at least one gypsum board must be<br />
cut oblique on one border.<br />
All profiles have to be fixed additionally by galvanised clamps.<br />
Alle Profile sind zusätzlich mit verzinkten Klammern zu befestigen.<br />
Profil<br />
Nr.<br />
Produkt<br />
Gruppe<br />
Längen in cm<br />
Verpackung<br />
1 Bd. = Stäbe<br />
GK-Platte<br />
in mm<br />
Farb-Nr. Werkstoff Alternativ-Werkstoff<br />
No.<br />
Prod.<br />
group<br />
Length in cm<br />
Packing<br />
lengths per bundle<br />
GK-Plasterboard<br />
in mm<br />
Colour-No. Material<br />
Alternate material<br />
3774<br />
1685<br />
305<br />
20<br />
PVC<br />
3776<br />
1185<br />
305<br />
35<br />
PVC<br />
3778<br />
1185<br />
305<br />
35<br />
PVC<br />
3780<br />
1185<br />
305<br />
35<br />
PVC<br />
3789<br />
1185<br />
305<br />
30<br />
PVC<br />
82