Installations- und Bedienungsanleitung (S. 2 ... - Theunissen 24

Now, use one or more provided spacer-pieces (A) if
necessary, in order to move the magnets (B) to the
level of the electronics unit (screw installation only).
Note the following: When using the 14.5 mm
spacer-piece (A), you must then fasten it with
two screws 2.2 x 16 mm and then fasten the
magnet unit (B) onto it with two other screws.
The flatter spacer-pieces are simply fastened
together with the magnets with 2 screws 2.2 x
16 mm (C).
Then push the cover (D) of the magnets until latching on
the magnet holder.
36