Anleitung - InstructionManual HandyMan DV 06_06 - ABC Products
Anleitung - InstructionManual HandyMan DV 06_06 - ABC Products
Anleitung - InstructionManual HandyMan DV 06_06 - ABC Products
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
In general the system should be balanced so the camera goes back to a vertical<br />
position within 1 – 2 seconds after letting it swing.<br />
1 – 2 sec.<br />
f) To adjust balancing you may need to add weight or take weight off. This is only if<br />
you find that by raising the position of the weight or by lowering it you do not find a<br />
situation in which the system is balanced (i.e. swing is slow).<br />
g) You must now proceed to adjust the fore and aft screws by loosening the fore-aft<br />
blocking screws very slightly (remember to be careful that the camera is horizontal<br />
when you do this to prevent the falling out of the camera). Turn carefully the both<br />
fore-aft screws slowly in one direction, till you reach the position in which the camera<br />
is horizontal in one axis. Now proceed to balancing the system horizontally by use of<br />
the side to side screws. Tighten the fore and aft screws when you have found the<br />
position in which the camera remains horizontal.<br />
Bedienungsanleitung // Instruction Manual: <strong>HandyMan</strong> <strong>DV</strong> (<strong>06</strong>/<strong>06</strong>) 19
Change language