HANDBUCH EINBAU – AUSBAU MONTAGE – DEMONTAGE ...

TECHNISCHE INFORMATIONENFITTING ET-USIO 11,5CMounting Torque: 80+5 Nm1. Body2"x14tpiFBA2. CO Valve23. Beer Valve4. SpringDE5. Tube45°Keg Neck6. SpringDSI Getränkearmaturen GmbH.If in doubt, please ask.Samples are required after each revision.This drawing is the property of Dispense Systems International.The information is confidential and should not be copied forany other purpose without the prior written permission ofBottom of KegCO₂-ValveI Stroke + TubeParts 2+5 - Part 1 A 3 mm 4 - 6 mmBeer Valve Part 3 - Part 2 B4 ±0,6 mmIIin Part 3 Ø11,5 C100 mm²Passages throughPart 3 - Part 5 D140 mm²Inner Tubein Part 5 Ø17,6 E240 mm²IIIPassages throughExtractor BodyPart 1F1560 mm²IV Temperature Resistance Short-time 135°CPRODUCTA changed: title; safety latch 26.11.2013 KunzeALTERATIONSDATENAMEDistance:REMARKSDRAWN 04.06.2013 kunzeAPPR.NORMPROD. DEV.ORIGIN-O 44,4 +0,3-0,214 mm Extractor in Closed Position9 mm Position when Cleaning and Filling11 mm Extractor in Open PositionDATEchamfered max. O 46ROUGHNESSDENAMESCALEMATERIALTITLETechnical Data Sheet ET-U SLI SIPROJ. METHODREPL.-FORMATA4DRAWING NUMBERD-910417REPL. BY7. Safety Latch8. Bayonet Plate9. Sealing RingWEIGHTVOLUME-SHEET12 SHTS.DSI Getränkearmaturen GmbH • Oberster Kamp 20 • 59069 HammTelefon: +49 (0) 23 85 772 100 • Telefax: +49 (0) 23 85 772 249 • Mail: info@dsi-group.net • Internet: www.dispensegroup.com20