Komponenten-Systeme | Components systemsKombirollen | Combined BearingsPräzisions-KombirolleTyp PR-PKombirolle justierbar mitOilamid*-EinsatzPrecision Combined BearingType PR-PCombined Bearing adjustable withOilamid* insert6,3Die Einstellung des Maßes (A) erfolgt durch Distanzscheibenzwischen Hauptkörper und Oilamid-Einsatz.Scheiben der Stärke 0,5 und 1,0 mm sind auf Wunsch verfügbar.Hinweis: Bei hoher axialer Belastung ist eine Bearbeitungder Gleitfläche zu empfehlen.Sonderbolzen auf Anfrage.*Oilamid ist ein hochabriebfester selbstschmierenderPolyamid.The adjustment of dimension (A) is obtained by means ofan insert positioned between the main body of the bearingand the oilamide insert.Washers with 0.5 + 1.0 mm thickness are available if required.Notice: At high axial forces we recommend to mill theaxial raceway of the profile.Special bolts on request.*Oilamid is a high resistant, self lubricant PolyamideBestellbeispiel | Order examplePR 4.072 P [Kombirolle] AP 0 [Anschraubplatte] S-PR 4.072-0,5 [Distanzscheibe für Kombirolle] DS-0-0,5 [Distanzscheibe für AP] PR 0 Nb [Profil]PR 4.072 P [Combined Bearing] AP 0 [Flange plate] S-PR 4.072-0,5 [Washer for Combined Bearing] DS-0-0,5 [Washer type DS for AP] PR 0 Nb [Profile]TypTypeD mm.D mm.T mm.T mm.d -0.05 mm.d -0.05 mm.H* mm.H* mm.h* mm.h* mm.B mm.B mm.A mm.A mm.S mm.S mm.r mm.r mm.PR 4.072 PPR 4.073 PPR 4.074 PPR 4.076 PPR 4.0784 PPR 4.079 PPR 4.080 P64,873,881,892,8111,8127,8153,84248545971801033035404560606043,048,050,561,069,075,582,033,040,039,548,055,059,562,0202323303137455,56,57,07,08,08,08,0ø 25ø 33ø 40ø 45ø 60ø 70ø100344355532C = Dyn. Tragzahl Radiallager (ISO 281/1), CO = Stat. Tragzahl Radiallager (ISO 76),FR = Tragzahl Radiallager zulässige Belastung zwischen Rolle und Profil,FA = Tragzahl Axiallager zulässige Belastung zwischen Rolle und Profil* Maße H und h ohne Distanzscheiben; max. +2 mm
Komponenten-Systeme | Components systemsKombirollen | Combined BearingsPassende AnschraubplattenFitting flange platesTypTypeAABBCCDDEEØ FØ FGGØ HØ HttDistanzscheibe t=0,5mmWasher t=0.5mmDistanzscheibe t=1,0mmWasher t=1.0mmAP 0AP 1AP 2AP 3.1AP 4AP 61001201201601802006080801001201504050506080100405050608010080909012014016010,512,512,517,017,017,0M10M12M12M16M16M16303540456060101515202020DS-0-0,5DS-1-0,5DS-2-0,5DS-3.1-0,5DS-4-0,5DS-6-0,5DS-0-1,0DS-1-1,0DS-2-1,0DS-3.1-1,0DS-4-1,0DS-6-1,0Anschraubplatten quadratisch Reihe AP-Q S. 74Flange plates square series AP-Q page 74Profile S. 56Profiles page 56TypTypeF R KNF R KNF A KNF A KNC KNC KNC O KNC O KNu/min max.r/pm max.Gewicht kgWeight kgAnschraubplattenFlange platesProfileProfilesPR 4.072 PPR 4.073 PPR 4.074 PPR 4.076 PPR 4.0784 PPR 4.079 PPR 4.080 P9,4011,3011,7220,4721,6830,9237,814,06,77,28,914,438,441,631,045,548,068,081,0110,0151,035,551,056,872,095,0132,0192,09008007006005005004000,490,740,941,572,633,906,50AP0 AP0-QAP1 AP1-QAP2 AP2-QAP3.1 AP3AP4 AP4-QAP4 AP4-QAP6 AP6-QPR 0 NbPR 1 NbPR 2 NbPR 3 NbPR 4 NbPR 5 NbPR 6 NbC = Dynamic load capacity radial bearing (ISO 281/1), CO = Static load capacity radial bearing (ISO 76),FR = Load capacity radial bearing max. allowable force between bearing and profile,FA = Load capacity axial bearing max. allowable force between bearing and profile* Dimension H and h without washers; max. 2 mm33