KESSEL-Badablauf „Der Ultraflache“ Auslauf seitlich DN 40 / DN 50 ...

Assembly tipsAttachment piece can beturned and continuouslyheight-adjustedFlexible level adjustmentbetween attachment pieceand drain bodyMinimum installation heightby sawing the attachmentpiece as requiredDuring initial operation, make sure that the odour trap is completely filled with water. Pleasecheck the water level at regular intervals to avoid odour pollution! If regular water replenishmentshould not be possible, the water-less odour stop KESSEL Multistop (art. no. 48500) canbe retrofitted instead. Caution: when retrofitting is carried out, the centring pin on the drainbody must be removed!Caution!Concerns Ultraflat DN 40: the lip seal delivered with the attachment piece is not used.CleaningOptimal pipe cleaning is possible by taking the cover off and removing the odour trap by tilting.When the odour trap is replaced, it must be completely filled with water.